FORUMS
Remove All Ads from XDA

[KERNEL] Lsskernel for 6.0.1 TW Roms

253 posts
Thanks Meter: 2,614
 
By lss1977, Senior Member on 31st May 2016, 08:11 PM
Post Reply Email Thread
/*
* Your warranty is now void. Knox 0x1.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
*/


Lsskernel

Thanks:
real_pac for testing my kernel and very usefull profiles for governors.
Kevp75 for frequencys idea and code.
6h0st for improved ramdisk ideas.
and all others for feedback and help.

* Features *
Quote:

Based on idle kernel by jcadduono
QuickWakeup added
Improve memory access performance
Async I/O latency to a ssd greatly increased, 34% gain
Updated to Linux version 3.4.113
Adreno optimizations
Tone down mpdecision helps with power
Added Frandom
Improved Interactive Governor
Added yankactive Governor
Added Smartaxx and Smartaxx eps governors
Added IImpulse Governor
Added Intelli Thermal v2
Added Msm_Hotplug
Added Bricked_Hotplug
Added MSM_Limiter
Added Arch power and Gentle Fair Sleepers toggles - Disabled by default
Dynamic Readahead added
Updated Ramdisk to support Grace UX and Note 7 port roms as well as others.
Many memory optimizations
Many other Optimizations

Latest Changelog:
Quote:

Version: 3.9UX
GPU OC to 578Mhz
Added Darkness, Nightmare, Allucard Governors.
Added WIFI Marshmallow code
Cpu frequency's fixes
swap script rermoved but can still be enabled by putting script back.
lots of other fixes and optimizations

When you flash this kernel it will wipe KA Data, Synapse Data if any and Install Synapse App so beware of that.

Download:
[QUOTE]N9005 + Variants
https://mega.nz/#F!yoATUZRA!7tCDxAdCUwyt6On0sYv2NA

Older Versions:
5.1.1 V3.8:

Latest Changelog:
Quote:

Version: 3.8UX Fixed
Synapse Support added, will install app when you install this kernel
mmc code revert and fixed up abit, corrects some mmc errors
Linux updated to 3.4.113 with dirty cow fix included
More security fixes
More Cpu fixes, makes phone faster and more smooth i reckon form previous versions
f2fs mount fixes in ramdisk
More optimzations
Fixed freeziing issues

Some bugs been reported are ext4 errors on data partition, i my self dont have them but will look into it for later versions.

When you flash this kernel it will wipe KA Data, Synapse Data if any and Install Synapse App so beware of that.

Download:
[QUOTE]N9005 + Variants
https://mega.nz/#F!yoATUZRA!7tCDxAdCUwyt6On0sYv2NA

Older Versions:

Download folder for note 5 port hlte variants.
https://mega.nz/#F!2gpgBahD!zDp8dRx-AbwiNOhnD165tw

Lsskernel for mm ports:


3.7ux N9005 + Variants
Download:
[QUOTE]N9005 + Variants
3.6ux N9005 + Variants
https://mega.nz/#F!79pkjYZT!cLlzg7LeY2ENoJp1plul3w

Latest Changelog:
Quote:

Version: 3.5UX
Compressed kernel with LZ4 should make phone smoother
Changed frequencys almost back to stock to fix reboots and undervolting issues
Oc up 2.6ghz
Updated more wifi code to MM version
Upfated exFat to version 1.2.19
minor fixes

Downloads :
Quote:

Version: 3.4UX
Added smartaxx eps governors
Added Intelli Thermal v2
Added MSM_Limiter
Update Ramdisk for Grace UX and other ports, so should work on all 6.0.1 TW roms.
Wireless and Bluetooth code updated with MM code.
Loads of cpu code fixes
Misc code fixes


Downloads :
Version:3.3RC
Revert code to make it even more stable
Added Arch power and Gentle Fair Sleepers toggles - Disabled by default.
Added Bricked Hotplug - Disable by default
Added yankactive governor
Added Frandom
Added More frequency steps and reduce max oc to 2.5ghz to make kernel more stable and battery friendly.
Enable Mpdecsion again but disable at boot as Msn_Hotplug is still default so enabled/diable option available.
Other minor fixes.

Default max freq = 2.2ghz
New min Freq = 288mhz
Default gov is smartmax with updated values
Default hotplug is msm_hotplug with updated values but i do recommend trying bricked_hotlug.

Enable/Disable above feature using kernal auditor mod, get it here http://forum.xda-developers.com/show....php?t=3333549

Download:
N9005 + Variants
https://mega.nz/#F!74wGgYIS!9gE17JUpvXn0OP-u3SfqAw

Latest Changelog:
Version:3.2RC
Added BFQ scheduler update to 7.8
Slim governor
Voltage Control
Thermal Control
Overclock up to 2.8GHz now
State Notifer
Zram Support
Zcache Updated
Update Sound drivers to MM code which fixes echo on speaker on my N9005 at least on the Phroneis rom.
MSN_hotplug fixes.
smartmaxx fixes.
Various other fixes.
Added init.d script with preset kernel parameters with help from real_pac. and others.

Final note, use kernal auditor if you would like to switch governors again and remember MPDECISION is disabled.

Downloads:


N9005 + Variants

https://mega.nz/#F!61ITXQhQ!u249NMUdFHbY39fc3Sy9BA

SD card fixes
Vold issues finally fixed for miles better cpu usage.
Spd encryption added
Disabled UKSM not needed now
Improved interactive Governor
Fixed haptic feedback and other issues.
+ more optimizations

Beta test v2..5 MM kernel for note 3 n9005 only:
https://mega.nz/#!Cp5BBLAJ!w95cncTfn...5BHWgpPnHc2Xbo

Untested v2..5 MM kernel for other note 3 variants :
https://mega.nz/#F!CxAjjTZC!0SsYjZSAyJsp4B8gw9KZyw

V2.11b:
Security in kernel updated
some code from SM-G900 MMXXU1CPB8 imported.
Interactive changed so phone runs a little better while still good with battery.
Plus other fixes and optimizations.
NFC still work in progress.

Beta test v2..11B MM kernel for note 3 n9005 only:
https://mega.nz/#!615VyAZY!2g6VA4wk9...jj0B1yDyLxF0U8

Untested variants:
https://mega.nz/#F!ytRWiaLR!JNEGqS3mLU_UuzAbpAOaag


Donations Welcome:

http://paypal.me/lsswizard
or paypal email is [email protected]

XDA:DevDB Information
LssKernel, Kernel for the Samsung Galaxy Note 3

Contributors
lss1977
Source Code: https://github.com/lsswizard/Lsskernel-note3

Version Information
Status: Stable
Current Stable Version: 3.9UX
Created 2016-05-31
Last Updated 2017-05-30
The Following 164 Users Say Thank You to lss1977 For This Useful Post: [ View ] Gift lss1977 Ad-Free
 
 
31st May 2016, 08:18 PM |#2  
bassini's Avatar
Senior Member
Flag Poznań
Thanks Meter: 469
 
More
Download link ?


nvidia power ... ? Its good for our note ?
and QucikWakeup how it works ?
The Following 3 Users Say Thank You to bassini For This Useful Post: [ View ] Gift bassini Ad-Free
31st May 2016, 08:21 PM |#3  
OP Senior Member
Thanks Meter: 2,614
 
Donate to Me
More
Quote:
Originally Posted by bassini

Download link ?


nvidia power ... ? Its good for our note ?
and QucikWakeup how it works ?

yep its built in an downloads on way upload is slow
The Following 6 Users Say Thank You to lss1977 For This Useful Post: [ View ] Gift lss1977 Ad-Free
31st May 2016, 08:22 PM |#4  
bassini's Avatar
Senior Member
Flag Poznań
Thanks Meter: 469
 
More
Quote:
Originally Posted by lss1977

yep its built in an downloads on way upload is slow

But QucikWakeup is like double tap2wake or its faster bot ?

i will test this kernel afap
31st May 2016, 09:48 PM |#5  
Senior Member
Flag kuwait city
Thanks Meter: 11
 
More
What about support for 6.01 note 5 port.. ?????

Sent from my SM-N9005 using XDA-Developers mobile app
1st June 2016, 03:21 AM |#6  
Senior Member
Thanks Meter: 31
 
More
Quote:
Originally Posted by lss1977

yep its built in an downloads on way upload is slow

What is quick wakeup. Is it double tap to wake,mate
1st June 2016, 06:53 AM |#7  
Good to see a new kernel's also Base on a great one. Hope the MM support come soon.

Sent from my SM-N910F using XDA-Developers mobile app
1st June 2016, 07:16 AM |#8  
Senior Member
Flag METZ-FRANCE
Thanks Meter: 62
 
More
Hello Bro,
I test it with N9005 French, DarkwolfS7E 6.0.1
instal, Wipe cache,Wipe Dalwik cache and GO...
Waiting more than 20 minutes and no reboot ...
sorry but it does not work...
Marco N9005
The Following 3 Users Say Thank You to maxzl57 For This Useful Post: [ View ] Gift maxzl57 Ad-Free
1st June 2016, 07:23 AM |#9  
bassini's Avatar
Senior Member
Flag Poznań
Thanks Meter: 469
 
More
System usage is to hight ? Why ? And 2 cores never go offline for me
The Following User Says Thank You to bassini For This Useful Post: [ View ] Gift bassini Ad-Free
1st June 2016, 09:02 AM |#10  
xinfinityoO's Avatar
Senior Member
Flag Wellington
Thanks Meter: 584
 
More
Quote:
Originally Posted by maxzl57

Hello Bro,
I test it with N9005 French, DarkwolfS7E 6.0.1
instal, Wipe cache,Wipe Dalwik cache and GO...
Waiting more than 20 minutes and no reboot ...
sorry but it does not work...
Marco N9005

it wont work on 6.0 or 6.01 yet
The Following 2 Users Say Thank You to xinfinityoO For This Useful Post: [ View ] Gift xinfinityoO Ad-Free
1st June 2016, 09:42 AM |#11  
Senior Member
Thanks Meter: 74
 
More
Hope it's compatible with 6.0 1 soon really looking forward to its please do keep up the good work

Sent from my SM-N9005 using Tapatalk
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes