Pure Stock PORTED S6 EDGE Lollipop TouchWiz STABLE v2.3
Real Look and Feel of an S6 Edge Device!
This rom is stable, fast, battery friendly and as stock as the S6 edge stock firmware.
* I am not responsible for bricked devices, dead SD cards*
* Please do some research if you have any concerns about features includedin this ROM*
* before flashing it! YOU are choosing to make these modifications*
* and if you point the finger at me for messing up your device, I will laugh at you.*
ROM Features:
* Based on Galaxy S6 Edge Firmware [G925FXXU1AOCV].
* All S6 Features.
* 90+ CSC Codes Selectable in Aroma. (Including T-Mobile etc.)
* Options for: Civato 3.8, 2.2, Arter 5.3 , 5.0.1 , Latest Stock N3 Kernels in Aroma. (Choose Arter 5.3 for best performance and stability).
* Multilanguage.
* Lightly Debloated.
* Prerooted, Deodexed, Zipaligned, Preinstalled Busybox, Knox-free, Init Support.
* Fully Working Ported N4/N3 Air-Commands.
* Private Mode only working with kernels supporting private mode, such as Civato Kernel (but a little unstable).
* Three cameras to choose rom in Aroma which are S6, Note 4, or Note 3 Camera.
* Viper4Android & SoundAlive Selectable in Aroma.
* Removed all FingerPrint related settings. (As it is useless).
There are many MORE features to discover as there are just too many to list!
What Works:
Almost Everything, except the following: (Where there are workarounds):
* World Clock FC's (Force Closes), later on in future updates there should be a fix.
* Some unlock effects have delay. (To fix this just select no effect in settings or set a pin/password.
How to Install:
1. Download ROM (Download Link Below).
2. Flash a custom recovery like PhilzTouch Recovery or CWM Based Recovery for N9005. (I highly recommend using TWRP).
3. Make a Backup of the previous ROM if you were to incur any issues.
4. Make a FULL WIPE to not have any issues with rom, such as FC's, lag, battery drain, etc.
5. Flash ROM.
6. Wait 5-10 minutes for ROM to setup (this only takes long on first boot).
7. Setup your device and BOOM! Done.
Changelong:
v2.3:
* Added 15 Lockscreen Unlock Effects.
* Improved Stability, Performance and Battery life.
* Fixed S6 Camera Effects.
* Updated Some Pre-installed System Apps.
* Reduced Device Wake-up Delay on Some Unlock Effects (Turn off Power Saving Mode to get rid of Long Delay).
* Added Screen Rotation Settings in Display Settings.
* Added Touch Key Light Duration Settings in Display Settings.
* Many more bug fixes, etc.
Download Links:
v2.3:
<Mod Edit Link Removed>
Credits:
www.g00h.com (OF COURSE)!
(For Kernels):
@Arter97
@Civato
@Friedrich
@Imoseyon
@slim80
I have received FULL permission from ORIGINAL Developer to publish this ROM as long as I had credited him, (as above). Enjoy this rom and the future updates to come!
Real Look and Feel of an S6 Edge Device!
This rom is stable, fast, battery friendly and as stock as the S6 edge stock firmware.
* I am not responsible for bricked devices, dead SD cards*
* Please do some research if you have any concerns about features includedin this ROM*
* before flashing it! YOU are choosing to make these modifications*
* and if you point the finger at me for messing up your device, I will laugh at you.*
ROM Features:
* Based on Galaxy S6 Edge Firmware [G925FXXU1AOCV].
* All S6 Features.
* 90+ CSC Codes Selectable in Aroma. (Including T-Mobile etc.)
* Options for: Civato 3.8, 2.2, Arter 5.3 , 5.0.1 , Latest Stock N3 Kernels in Aroma. (Choose Arter 5.3 for best performance and stability).
* Multilanguage.
* Lightly Debloated.
* Prerooted, Deodexed, Zipaligned, Preinstalled Busybox, Knox-free, Init Support.
* Fully Working Ported N4/N3 Air-Commands.
* Private Mode only working with kernels supporting private mode, such as Civato Kernel (but a little unstable).
* Three cameras to choose rom in Aroma which are S6, Note 4, or Note 3 Camera.
* Viper4Android & SoundAlive Selectable in Aroma.
* Removed all FingerPrint related settings. (As it is useless).
There are many MORE features to discover as there are just too many to list!
What Works:
Almost Everything, except the following: (Where there are workarounds):
* World Clock FC's (Force Closes), later on in future updates there should be a fix.
* Some unlock effects have delay. (To fix this just select no effect in settings or set a pin/password.
How to Install:
1. Download ROM (Download Link Below).
2. Flash a custom recovery like PhilzTouch Recovery or CWM Based Recovery for N9005. (I highly recommend using TWRP).
3. Make a Backup of the previous ROM if you were to incur any issues.
4. Make a FULL WIPE to not have any issues with rom, such as FC's, lag, battery drain, etc.
5. Flash ROM.
6. Wait 5-10 minutes for ROM to setup (this only takes long on first boot).
7. Setup your device and BOOM! Done.
Changelong:
v2.3:
* Added 15 Lockscreen Unlock Effects.
* Improved Stability, Performance and Battery life.
* Fixed S6 Camera Effects.
* Updated Some Pre-installed System Apps.
* Reduced Device Wake-up Delay on Some Unlock Effects (Turn off Power Saving Mode to get rid of Long Delay).
* Added Screen Rotation Settings in Display Settings.
* Added Touch Key Light Duration Settings in Display Settings.
* Many more bug fixes, etc.
Download Links:
v2.3:
<Mod Edit Link Removed>
Credits:
www.g00h.com (OF COURSE)!
(For Kernels):
@Arter97
@Civato
@Friedrich
@Imoseyon
@slim80
I have received FULL permission from ORIGINAL Developer to publish this ROM as long as I had credited him, (as above). Enjoy this rom and the future updates to come!
XDA:DevDB Information
Stock S6 Edge ROM for N9005, ROM for the Samsung Galaxy Note 3
Contributors
moustafasadek11, g00h
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Lollipop Bootloader + Modem
Based On: Stock Samsung
Version Information
Status: Stable
Current Stable Version: v2.3
Stable Release Date: 2015-06-11
Created 2015-06-11
Last Updated 2015-06-12
Last edited: