FORUMS

(UPDATED) S10 Press BIXBY for MAX Brightness, MAX GPU, Faster SD Card speed + More

20 posts
Thanks Meter: 3
 
By David8960, Junior Member on 25th March 2020, 01:18 PM
Post Reply Email Thread
** UPDATED 04/04/2020 1000% Better and more stable and more performance than ever. ** Read the instructions carefuly!

David8960's GALAXY S10 Single button ULTIMATE CPU/GPU, MAX BRIGHTNESS + SD CARD BOOSTER & more under the hood tweaks.

This code has been changed & revised LOADS of times. I've finally got it all to be COMPLETELY stable. I'm using S10 G973F (running on Android10 I'm on BTA8 but should run on newer firmware.

The idea of this is so you press bixby and get the HIGHEST performance posible (at the cost of being able to fry an egg on your phone screen lol)

Things you'l need:

- Samsung Galaxy S10

- Flar2's Button Mapper (https://play.google.com/store/apps/d...mebutton&hl=es)

- Rooted Device

- Root Explorer (remember to mount R/W when doing operations in / partition)



Instructions

1. Install Button remapper

2. Setup the app. Make sure you disable the setting that disable the codes from running (i.e all the BYPASS options that disable the codes if, for example the volume panel is open etc)

3. Tap on bixby, and tap customize, Tap SINGLE PRESS then add in advanced, click root code and add CODE 1 (the single press code)

4. Then, add the restore defaults code on BIXBY LONG press, by adding code 2.

5. Here is the trickier bit. Go to root explorer, then mount R/W in root explorer and open /system/usr/keylayout/generic.kl --> and change (116) POWER to CAMERA and then reboot and you'l see a "camera" button appear in button remapper, then edit single press to execute this root code. This will make your power button work as normal, but it executes the performance disabler code to prevent crashes, and also saves power.

6. (optional) Add the double tap volume toggles, which enable or disable wireless comunications easily.

7. Enjoy. All this works seamlessly and you'l forget about it running! (Remember to remap the power menu to the power button's long press within the app)


Controls (If installed properly)

Press bixby to max out the CPU, GPU, SD card, brighness, quicker animations & more

Hold bixby to disable performance optiomisations.

Locking the screen also disables performance mode.

Double tapping VOL UP enables wireless comunications

Double tapping VOL DOWN disables wireless comunications


* ADVICE *

- I advise toggling auto brightness OFF should you experience any issues with the brightness dropping by itself.

-Dont activate performance mode via bixby button on lock screen. Performance mode is set to be disabled when the screen turns off by power button.
The screen wont turn off in performance mode as its not ment to run when the phone sleeps (for stability and power saving reasons)
Thats why the screen time out is set to infinite in performance mode and as soon as you sleep the device is restores default speeds,
but restores the timeout aswell for the next time you use the device.

- This code has a little more to it than you'd think, so dont pick and choose what to use of the code as they are ment to work together.

// CODES \\

CODE 1 [SINGLE PRESS bixby for performance] - Increases CPU, GPU + SD CARD R/W performance (Keeps Wi-Fi, Data, and bluetooth ON)



Code:
print "Performance" && mount -o remount,rw / && echo 'performance' > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor && echo 'performance' > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor && echo 'performance' > /sys/devices/system/cpu/cpufreq/policy6/scaling_governor && echo '1950000' > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq && echo '2314000' > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq && echo '2730000' > /sys/devices/system/cpu/cpufreq/policy6/scaling_min_freq && echo '48599' > /sys/class/backlight/panel/brightness && echo '1' > /sys/devices/system/cpu/cpu0/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu0/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu1/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu1/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu2/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu2/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu3/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu3/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu4/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu4/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu5/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu5/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu6/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu6/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu7/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu7/cpuidle/state1/disable && echo '1' > /sys/devices/system/cpu/cpu0/cpuidle/state0/disable && echo '1' > /sys/devices/system/cpu/cpu0/cpuidle/state1/disable && settings put system screen_off_timeout 99999 && svc wifi enable && svc data enable && svc bluetooth enable && settings put global window_animation_scale 0.75 && settings put global transition_animation_scale 0.75 && settings put global animator_duration_scale 0.75 && echo '2048' > /sys/devices/virtual/bdi/179:0/read_ahead_kb && echo '702000' > /sys/devices/platform/18500000.mali/clock && echo '640000' > /sys/class/devfreq/17000040.devfreq_disp/scaling_devfreq_min && echo '666000' > /sys/class/devfreq/17000080.devfreq_score/scaling_devfreq_min && echo '2093000' > /sys/class/devfreq/17000010.devfreq_mif/scaling_devfreq_min && echo '534000' > /sys/class/devfreq/17000020.devfreq_int/scaling_devfreq_min && echo '680000' > /sys/class/devfreq/17000030.devfreq_intcam/scaling_devfreq_min && echo '690000' > /sys/class/devfreq/17000050.devfreq_cam/scaling_devfreq_min && echo '1180000' > /sys/class/devfreq/17000060.devfreq_aud/scaling_devfreq_min && echo '534000' > /sys/class/devfreq/17000070.devfreq_iva/scaling_devfreq_min && echo '666000' > /sys/class/devfreq/17000090.devfreq_mfc/scaling_devfreq_min && echo '933000' > /sys/class/devfreq/170000a0.devfreq_npu/scaling_devfreq_min



CODE 2 [HOLD bixby for defaults] Reverts CPU, GPU + SD CARD R/W performance (Keeps Wi-Fi, Data, and bluetooth ON)

Code:
print "Default" && mount -o remount,rw / && echo 'schedutil' > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor && echo 'schedutil' > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor && echo 'schedutil' > /sys/devices/system/cpu/cpufreq/policy6/scaling_governor && echo '442000' > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq && echo '507000' > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq && echo '520000' > /sys/devices/system/cpu/cpufreq/policy6/scaling_min_freq && echo '20000' > /sys/class/backlight/panel/brightness && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu1/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu1/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu2/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu2/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu3/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu3/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu4/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu4/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu5/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu5/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu6/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu6/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu7/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu7/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state1/disable && settings put system screen_off_timeout 30000 && svc wifi enable && svc data enable && svc bluetooth enable && settings put global window_animation_scale 1.00 && settings put global transition_animation_scale 1.00 && settings put global animator_duration_scale 1.00 && echo '128' > /sys/devices/virtual/bdi/179:0/read_ahead_kb && echo '0' > /sys/devices/platform/18500000.mali/clock && echo '134000' > /sys/class/devfreq/17000040.devfreq_disp/scaling_devfreq_min && echo '25000' > /sys/class/devfreq/17000080.devfreq_score/scaling_devfreq_min && echo '421000' > /sys/class/devfreq/17000010.devfreq_mif/scaling_devfreq_min && echo '100000' > /sys/class/devfreq/17000020.devfreq_int/scaling_devfreq_min && echo '630000' > /sys/class/devfreq/17000030.devfreq_intcam/scaling_devfreq_min && echo '650000' > /sys/class/devfreq/17000050.devfreq_cam/scaling_devfreq_min && echo '295000' > /sys/class/devfreq/17000060.devfreq_aud/scaling_devfreq_min && echo '56000' > /sys/class/devfreq/17000070.devfreq_iva/scaling_devfreq_min && echo '134000' > /sys/class/devfreq/17000090.devfreq_mfc/scaling_devfreq_min && echo '167000' > /sys/class/devfreq/170000a0.devfreq_npu/scaling_devfreq_min


CODE 3 [Single press power button (remapped to CAMERA BUTTON)]



Code:
input keyevent 26 && mount -o remount,rw / && echo 'schedutil' > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor && echo 'schedutil' > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor && echo 'schedutil' > /sys/devices/system/cpu/cpufreq/policy6/scaling_governor && echo '442000' > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq && echo '507000' > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq && echo '520000' > /sys/devices/system/cpu/cpufreq/policy6/scaling_min_freq && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu1/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu1/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu2/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu2/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu3/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu3/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu4/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu4/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu5/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu5/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu6/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu6/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu7/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu7/cpuidle/state1/disable && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state0/disable && echo '0' > /sys/devices/system/cpu/cpu0/cpuidle/state1/disable && settings put global window_animation_scale 1.00 && settings put global transition_animation_scale 1.00 && settings put global animator_duration_scale 1.00 && echo '128' > /sys/devices/virtual/bdi/179:0/read_ahead_kb && echo '0' > /sys/devices/platform/18500000.mali/clock && settings put system screen_off_timeout 30000 && echo '134000' > /sys/class/devfreq/17000040.devfreq_disp/scaling_devfreq_min && echo '25000' > /sys/class/devfreq/17000080.devfreq_score/scaling_devfreq_min && echo '421000' > /sys/class/devfreq/17000010.devfreq_mif/scaling_devfreq_min && echo '100000' > /sys/class/devfreq/17000020.devfreq_int/scaling_devfreq_min && echo '630000' > /sys/class/devfreq/17000030.devfreq_intcam/scaling_devfreq_min && echo '650000' > /sys/class/devfreq/17000050.devfreq_cam/scaling_devfreq_min && echo '295000' > /sys/class/devfreq/17000060.devfreq_aud/scaling_devfreq_min && echo '56000' > /sys/class/devfreq/17000070.devfreq_iva/scaling_devfreq_min && echo '134000' > /sys/class/devfreq/17000090.devfreq_mfc/scaling_devfreq_min && echo '167000' > /sys/class/devfreq/170000a0.devfreq_npu/scaling_devfreq_min


CODE 4 [DOUBLE TAP Volume Down Disable wireless comunications] - Disables Wi-Fi, Data, Bluetooth and NFC KEEPS OFF

Code:
svc wifi disable && svc data disable && svc bluetooth disable && svc nfc disable



CODE 5 [DOUBLE TAP Volume UP Enable wireless comunications] - Enables Wi-Fi, Data, Bluetooth and keeps NFC OFF

Code:
svc wifi enable && svc data enable && svc bluetooth enable && svc nfc disable
The Following User Says Thank You to David8960 For This Useful Post: [ View ] Gift David8960 Ad-Free
25th March 2020, 08:20 PM |#2  
Member
Thanks Meter: 10
 
More
How can I find boot?

تم الإرسال من SM-G975F باستخدام Tapatalk
27th March 2020, 08:51 AM |#3  
ZhaoPH's Avatar
Senior Member
Thanks Meter: 74
 
Donate to Me
More
Quote:
Originally Posted by noor.jndo

How can I find boot?

تم الإرسال من SM-G975F باستخدام Tapatalk

I think in order to this, you have to be rooted so that you can flash anything on boot.
27th March 2020, 11:21 PM |#4  
OP Junior Member
Flag Calatayud
Thanks Meter: 3
 
More
Quote:
Originally Posted by noor.jndo

How can I find boot?

تم الإرسال من SM-G975F باستخدام Tapatalk

You need to be rooted. This script is to be added for boot completed. You need an app capable of executing root commands at boot. I personally use 3C's ALL-ONE-TOOLBOX. Theres a Scripter included, just enter the code and set for boot.
1st April 2020, 10:19 PM |#5  
Senior Member
Thanks Meter: 12
 
More
please add a script file..
Yesterday, 03:02 PM |#6  
OP Junior Member
Flag Calatayud
Thanks Meter: 3
 
More
Quote:
Originally Posted by Mason76

please add a script file..

Ive changed how it all works now, follow the instructions and check it out now let me know if you have any trouble. Its 100% better now
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes