FORUMS
Remove All Ads from XDA

resizing partition bricked my phone?

69 posts
Thanks Meter: 2
 
By cubajean10, Member on 8th April 2019, 04:52 PM
Post Reply Email Thread
i had cm12 I think with twrp on my s2 tmobile, I followed https://forum.xda-developers.com/sho...14&postcount=3

1) After downloading the tools, install the Samsung USB Driver and unzip the file of Stock ROM.
The original ROM file is tar.md5
2) Open the odin and connect your phone to the PC. The device ID will appear in the application interface.
3) In the pit tab on the left side, select the file "I9100_1.5GB-System_6GB-Data_512MB-Preload_by-the.gangster.pit"
4) In AP button, select the tar.md5 file. The odin app will frozen for a few minutes but do not worry.
After this, select start button. WAIT TO TERMINATE, DO NOT PULL THE CABLE

at step 4 i get in odin

<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> zImage
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!

now the phone won't turn on get into download recovery etc. when plugged in to pc it says usb not recognized. suggestions?
 
 
8th April 2019, 08:34 PM |#2  
Member
Thanks Meter: 19
 
More
Quote:
Originally Posted by cubajean10

i had cm12 I think with twrp on my s2 tmobile, I followed https://forum.xda-developers.com/sho...14&postcount=3

1) After downloading the tools, install the Samsung USB Driver and unzip the file of Stock ROM.
The original ROM file is tar.md5
2) Open the odin and connect your phone to the PC. The device ID will appear in the application interface.
3) In the pit tab on the left side, select the file "I9100_1.5GB-System_6GB-Data_512MB-Preload_by-the.gangster.pit"
4) In AP button, select the tar.md5 file. The odin app will frozen for a few minutes but do not worry.
After this, select start button. WAIT TO TERMINATE, DO NOT PULL THE CABLE

at step 4 i get in odin

<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> zImage
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!

now the phone won't turn on get into download recovery etc. when plugged in to pc it says usb not recognized. suggestions?

Remove battery 10 seconds hold down vol down + home + power then insert battery back
8th April 2019, 08:52 PM |#3  
OP Member
Thanks Meter: 2
 
More
Thanks. I don't have a home button. The trick I saw was press volume up down and insert USB . Which worked previously to get it to download mode but not anymore after this error. Any other ideas ? When I do this same up down vol and USB I get USB not recognized on PC and dead screen on phone
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes