FORUMS
Remove All Ads from XDA

[KERNEL][2.08][APP/PRO/OTA][AOSP&SAMMY] N.E.A.K. ICS - On Vacation (v2.1.2x)

4,756 posts
Thanks Meter: 4,931
 
By simone201, Inactive Recognized Developer on 1st April 2012, 06:05 PM
Post Reply Email Thread
Hi all!! After a lot of time spent in developing for GB, finally i have done my ICS kernel, all i can say is that is light, blazing fast and stable. I hope u will love it!

LOGO AND BANNERS BY zantekk!!



The lightest kernel for I9100/I777 ever made!!

ONLY FOR INTERNATIONAL I9100 & I777!!

I777 USERS PLEASE CLICK HERE -----> Link

INFOS ON OTA UPDATER AND CONFIGURATOR : Click Here!

CONFIGURATOR APP MADE BY NEAR TEAM (Simone201 & nrk_2k)

FREE ----> PRO (paid) ----->

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

IF YOU'RE USING MY KERNEL PLEASE ADD ONE OF THESE SMALL BANNERS INTO YOUR SIGNATURE!! THANKS IN ADVANCE!!
(by nrk_2k & zantekk)







------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Quote:

- Based on sammy update6+7 sources, updated to 3.0.39
- Touch CWM Recovery 5.5.0.4 NEAK Modded
- Governors: Ondemand, LulzactiveV2(default), Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv3-R2, Noop, SIO, VR (default)
- Using JRCU (++smoothness, ++responsiveness)
- XZ Compression only for KERNEL (+speed, --size)
- Built-In support for Voodoo Louder!
- NO BRICK BUG IN NEAK KERNEL!!! (using old emmc driver which is safe)
- Fully compatible with: Voodoo Louder, Tegrak's 2nd Core, Tegrak's Lulzactive app, Voltage Control, SetCPU, CWM Manager

INITRAMFS AND MISC:
- Manual Rooting via NEAK Recovery Menu (3.0.7 + latest binary)
- Auto-install of modded BLN Liblights (for both versions)
- Init.d Support (auto creation of init.d folder via cwm)
- Bootanimation Support (system/media & data/local)
- Touch Move Support + Touchscreen Fix (5 - thx to vitalij)
- BLN v2 support (by Creams, thx to gm for the porting)
- Full BLN Breathing + Blinking support (thx to myfluxi for aosp and gm for sammy)
- CIFS, FUSE, CUSE Support (modules)
- Logger already enabled into the kernel

CPU/GPU:
- NO OC!!!! (100-1200Mhz)
- CPU frequency scaling bug fixes, no more freezes!! (thx to gm & entropy)
- CPU Undervolt support (thx to netarchy, rebased by me)
- Complete control of freqs/voltages with Voltage Control/SetCPU/NeakPro
- GPU Overclock/Undervolt (by netarchy)
- Charging current interface support (by GM - via Voltage Control)
- Speedmod Sharpness fix (thx to hardcore)
- Brightness Curve Mod (thx to GM)
- mDNIe and panel settings moddable (thx to myfluxi)

MEMORY & PERFORMACES:
- ARM CPU Topology + sched_mc (can be enabled via CWM, disabled by default)
- SLQB Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- Disabled all the big debugging (++speed, --size)
- AFTR ARM Idle Mode (enable via neak app or recovery)(++battery)

CONNECTIVITY TWEAKS:
- M250S WiFi drivers + Upstream updates (+performances, -issues)
- Disabled debugging WiFi/BT
- TCP/IP Tweaks
- TCP buffer tweaks

OPTIMISATIONS:
- Dynamic Hotplug with tweaked thresholds (with Tegrak's 2nd Core support)
- 2nd CPU Core OFF when screen is locked (thx to arighi)
- ARM_ERRATA_743622 & ARM_ERRATA_754322 & ARM_ERRATA_754327
- Upstream patches and fixes from Linux 3.2/3/4 mainline kernel
- GPU UI Rendering
- Fixed fuelgauge wakelocks (by Entropy)
- Compiled with Linaro GCC 4.5-2012.03-dev + A lot of optimisation flags (including hard float and graphite)
- Optimised EXT4 filesystem
- Generally optimised code (removed useless functions and variables, fixed warnings)
and many others...

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Quote:

- Modded Recovery with N.E.A.K. Menu:
1) Remove voltage settings (Voltage control)
2) Create EFS Backup (in /sdcard/near)
3) Bus ASV Voltages Table Settings... ---> 7 voltage levels
4) Governors Menu...
- Enable/Disable Conservative Governor
- Enable/Disable Lazy Governor
- Enable/Disable Lionheart Tweaks (only with conservative gov)
- Enable/Disable Lagfree Governor
5) Misc Options Menu...
- Enable/Disable sched_mc power functions (++battery, - performance)
- Enable/Disable AFTR Idle Mode
6) Configurator PRO Menu...
- Various cleaning for scripts
- Cleaning neak folder
7) ROM TOOLS MENU (in main menu)
- Clear init.d folder
- Install/Reinstall Root

- NEAK CONFIGURATOR APP (also PRO)
- NO COMPRESSION for Initramfs
- Tweaked Ondemand, lulzactive and lazy governors
- Tweaked BFQ, SIO and VR Schedulers for NAND devices


------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



Quote:

v2.1.2x AOSP/AOKP/CM9 Zip = Click Here
v2.1.2x AOSP/AOKP/CM9 TAR = Click Here


v2.1.2x SAMSUNG+Official MIUI Zip = Click Here
v2.1.2x SAMSUNG+Official MIUI TAR = Click Here


DON'T FORGET TO SUPPORT MY WORK WITH A SMALL DONATION! LINK IN MY SIGNATURE!!


NEAK CONFIGURATOR APP FREE DOWNLOAD LINK:


NEAK CONFIGURATOR APP PRO DOWNLOAD LINK:



OLD DOWNLOADS:

v2.1.1x AOSP/AOKP/CM9:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.1.1x SAMMY+MIUI:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

Code:
v2.1x AOSP/AOKP/CM9:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.1x SAMMY+MIUI:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0.6x AOSP/AOKP/CM9:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.0.6x SAMMY+MIUI:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0.5x AOSP/AOKP/CM9:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.0.5x SAMMY+MIUI:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0.4x AOSP/AOKP/CM9:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.0.4x SAMMY+MIUI:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0.3x AOSP/AOKP/CM9:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

V2.0.3x SAMMY+MIUI:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0.2x AOSP:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.0.2x SAMMY:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0.1 AOSP:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.0.1 SAMMY:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=

v2.0x AOSP:
ZIP: http://code.google.com/p/neak-kernel...P.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...P.tar&can=2&q=

v2.0x SAMMY:
ZIP: http://code.google.com/p/neak-kernel...Y.zip&can=2&q=
TAR: http://code.google.com/p/neak-kernel...Y.tar&can=2&q=
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


BUG TRACKER (write here your bug reports!!): http://code.google.com/p/neak-kernel-sgs2/issues/list


KNOWN BUGS:
- Even if you set as max freq a value < 1200Mhz, that step will be used always...still have to figure out why
- Vibration on AOSP MAY be weaker


------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



v2.1.2x (AOSP & SAMMY+MIUI):
Quote:

KERNEL:
- Updated to Linux 3.0.39
- bluetooth: drivers from update7 I9100 sources (4.0.4 compatibility)
- bcmdhd: wireless drivers from update7 sources (4.0.4 compatibility)
- HACK: block fbearlysuspend to not break androids crt-off animation (thx to codeworkx)
- s3cfb: asynchronous vsync notification (thx to codeworkx)

INITRAMFS:
- initramfs: only installing su binary as the apk is too big to be stored
- Updated CM9 and sammy files for better compaibility
- JellyBean LPM Charging mode for AOSP ROMs (NO CM10/JB SUPPORT!! DON'T GET CONFUSED!!)

MISC:
- aosp: enable cgroup cpusets
- updated su binary to latest available


v2.1.1x (AOSP & SAMMY+MIUI):
- Re-Based on Samsung Update6 sources
- Updated to Linux 3.0.37
- Stock WiFi drivers from Update6 sources
- bcmdhd: Change packet filter settings to block multicast (thx to Entropy)
- Reverted original haptic feedback motor


Code:
v2.1x (AOSP & SAMMY+MIUI):
- Updated to Linux 3.0.36 sources
- cpufreq: another change to stop Level not found issue (thx to Ktoonsez - should fix slow-mo issues)
- mach-exynos: cpufreq: Fix derpage that caused level not found errors
- cpufreq: reverting to original Entropy512's level-not-found fix
- max8997_vibrator: user configurable vibrator intensity (thx to Entropy512 & codeworkx)
- keyboard: cypress: Use standard voltage for constant/blinking bln
- keyboard: cypress: Ensure light is off, enable regulator only if needed
- mach-exynos: mshci-gpio: Small change from N7000 source drop
- wakelock: (tungstwenty's implementation) expanded deleted wakelocks
- wakelock: main_wake_lock fix by tungstwenty
- net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog
- Removed some more debug infos

v2.0.6x (AOSP & SAMMY+MIUI):
- Updated to 3.0.33
- keyboard: cypress: Don't renew notification timeout option
- keyboard: cypress: Automatically enable BLN while charging (aosp)
- mach-u1: Fixing light sensor breakage
- vr: fifo_batch set to 1
- Various updates of WiFi driver
- sched_rt: fix SCHED_RR across cgroups
- ld9040: increase boot gamma level to original GAMMA_160CD level
- Updating sammy cypress driver from SiyahKernel
- max8997: Implement Accessory Charger Adapter support
- Patch the firmware of certain Samsung emmc parts to fix a bug
- mach-exynos: tmu: add tmu sysfs for temperature reading
- modem_if: update modem driver to update5 sources
- usb: gadget: composite: Fix corruption when changing configuration
- sched: fix cpu index check in get_cpu_nr_running funtion
- mali: Driver update from N7000 Update 3 sources
- USB Gadget updates
- mach-u1: Allow reduced GPU voltage
- fs: fat: fallocate support for fat driver (from n7000 sources)
- ext4: add missing save_error_info() to ext4_error()
- mc1n2: replace mdelay() with msleep() to be consistent with GB kernels
- aosp: updated initramfs from latest cm9 nightly

v2.0.5x (AOSP & SAMMY+MIUI):
- Updated to 3.0.31
- usb: disable parent hub tt detection to get HID devices working (gm)
- usb: otg: merges with sztupy's usb host mode build 5 (gm)
- u1-otg: disable irqs on dev when otg host is stopped (gm)
- cpufreq: fixing vdd_levels interface (gm)
- busfreq: added another asv table voltage step (lvl 7, heavy uv)
- mach-u1: raised movhysti to 4
- mach-exynos: clock-exynos4: sync clock related exynos4210 code with update5 sources (gm)
- tspdrv: Add adjustable vibrator levels (myfluxi)
- netfilter: xt_qtaguid: start tracking iface rx/tx at low level
- ld9040: reworked gamma values and settings from SiyahKernel (gm)
- touchscreen: mxt224_u1: Update touch values according to power state (myfluxi)
- touchscreen: mxt224_u1: Use mxt224_ta_probe instead of writing directly (myfluxi)
- keyboard: cypress: Add LED breathing effect[ (myfluxi+gm)
- keyboard: cypress: Use CMs original BLN timeout mechanism (myfluxi) - only aosp
- keyboard: cypress: Stop notification on low battery (myfluxi) - only aosp
- keyboard: cypress: Add LED button fade out effect option (myfluxi) - only aosp
- Add ACCESSORY_SET_AUDIO_MODE control request and ioctl
- USB: gadget: f_accessory: Add support for HID input devices
- USB: gadget: f_audio_source: New gadget driver for audio output
- net: wireless: bcmdhd: Check return value from dhd_dev_init_ioctl()
- net: wireless: bcmdhd: Ignore signal_pending() while waiting in IOCTL
- netfilter: xt_IDLETIMER: Use uevent instead of new netlink msg type
- net: check return value for dst_alloc
- ipv6: check return value for dst_alloc
- using lvl 3 as default for bus asv voltages
- raised min_free_kbytes again for any kind of toggle issues
- Reworked kernel name string

v2.0.4x (AOSP & SAMMY+MIUI):
- Updated to Linux 3.0.30
- RCU: Joe's RCU
- Updated WiFi driver to M250S update5 sources (no more toggling issues)
- mach-exynos: busfreq: Add undervolt option using asv table (use neak menu from recovery to manage it) - thx to myfluxi
- sync: Add synchronization framework
- ld9040: Add adjustable gamma levels (thx to myfluxi)
- mDNIe: Add adjustable settings (thx to myfluxi)
- ld9040: increase number of gamma levels from 21 to 25 (thx to gm)
- cpufreq: removed smooth_scaling interface
- cpufreq: Separate speed target revalidate time and initial set time
- cpuidle: reverted to official samsung source drivers
- usb modifications to get HID working and fix OTG crashing (thx to gm)
- usb: final fix for crashing phone while using usb or charger
- ARM: smp: Align secondary_start_kernel with mainline
- ARM: SMP: use a timing out completion for cpu hotplug
- arm: vfp: Fix memory corruption on PM suspend
- ARM: vfp: only clear vfp state for current cpu in vfp_pm_suspend
- defconfig: removed RCU_BOOST feature
- defconfig: removed netfilter OWNER option (fixes BBS crashing)
- sched: Cleanup cpu_active madness
- Disabled GENTLE_FAIR_SLEEPERS (+responsiveness)
- usb: using 2 different modded drivers for aosp and sammy (to avoid usb issues)
- lowmemorykiller: upstream updates and improvements
- MAKEFILE: Removed asv-4x12.o and cpufreq-4x12.o
- Upstream updates for WiFi drivers
- Removed CUSE module
- TOTAL RECOVERY RESTYLING (added clock, new headers, rom tools menu...)
- Fixed wrong path for sdcard into EFS Backup
- Updated samsung liblights, now perfectly working with brightness and bln (thx to gm)
- Using MTP as default on sammy roms
- Fixed ADB corrupted binary file into sammy initramfs
- Updated sammy init files
- Updated aosp init files from latest aokp build
- MANUAL ROOTING VIA RECOVERY NEAK MENU!
- recovery: using noop+ondemand while in recovery mode (faster backup/restore)
- Official NEAK I777 support (into I777 forums)
- Enabled PANIC_TIMEOUT (so it reboots when SoDing)
- Re-tweaked XZ compression values (boots faster)[/I]
- Tweaked touch sensitivity
- Moving init.d folder to init.d-old while flashing

v2.0.3x (AOSP & SAMMY+MIUI):
- Updated to 3.0.28
- Updated WiFi drivers
- Fixed potential WiFi toggle issues (thx to wjchen)
- Fixed a lot of compiling warnings (thx to myfluxi)
- lulzactive: safety floor for up_sample_time
- Switching again to SHMEM (fixes flashing themes from cwm)
- net: now using Stochastic Fair Blue NET Scheduler (SFB)
- mach-exynos: Enable old s5pv310 pm-hotplug module (thx to myfluxi)
- Using hotplug thresholds from NEAK GB kernel
- power: lowered misc charge current
- cypress: using myfluxi's touchkey driver (for AOSP, with BLN)
- Touchkey timeout for AOSP roms set to 1s
- Tweaked smooth_scaling parameters (+responsiveness)
- Upstream and CM9 sources updates
- Netfilter upstream updates
- arm: SMP: Fix RCU stalls due to mis-backported upstream patch (thx to Entropy512)
- More cleanup
- Modified Recovery UI (and fixed options issues)
- Corrected format for emmc (now external) and sdcard (now internal)
- Using original NET buffers
- Removed J4FS module (afaik doesn't work, neither if insmodded)
- FULL SUPPORT FOR OFFICIAL MIUI (using sammy version)
- Fixed WiFi into latest CM9 nightlies
- NO SWITCHED MOUNTS FOR SDCARDs YET!! (i want to wait)
- Using mass storage mode for both MIUI and Sammy roms
- Fixed USB Mount into CWM Recovery
- A bit reduced kernel compression
- The ZIP file now clears INIT.D folder during flashing
- Using NEON for VFP
- More optimised CFLAGS
- Updated Linaro 4.5 toolchain to latest dev build

v2.0.2x (AOSP & SAMMY):
- Support for MIUI ROMs (only AOSP version of NEAK)
- Fixed lags into UI (removed CFS tweaks)
- Fixed DPI issues into AOSP ROMs
- Enabled CRC32 slice-by-8 algorithm
- exynos4: Disable SW downclock in cpuidle
- galaxys2: made google gadget code using 2 luns for aosp roms
- cpufreq: smooth scaling interface
- recovery: fixing switched mounts for both sdcards into mounts&storage menu
- ondemand: tweaking for responsiveness
- vr: a bit tweaking for a bit more throughput
- enabled mass storage mode for aosp roms (who supports it)
- sched: re-enabling GENTLE_FAIR_SLEEPERS
- TCP buffer tweaks

v2.0.1x (AOSP & SAMMY):
- Updated to Linux 3.0.27 kernel
- Fixed touch buttons and swype into Recovery (thx to gm)
- Tuned lulzactive parameters
- New lulzactive based on newest interactive (thx to gm)
- Added pegasusq governor (for who wants it...)
- Added J4FS module (but seems not working fine)
- mali: more aggressive GPU thresholds (++3d performance)
- cm3663: set initial state of proximity sensor to "far" (codeworkx)
- stand-hotplug: Don't ever hotplug out cpu 0 (thx to Entropy512)
- mach-exynos: stand-hotplug: Improve CPU0 turnoff protection logic (thx to Entropy512)
- Tweaked hotplug thresholds (+responsiveness)
- No more lags at all in any kind of rom!

v2.0x AOSP&SAMMY:
- Based on samsung update4 sources
- Patched up to 3.0.26 (thx to linaro)
- Modded CWM Recovery Touch 5.5.0.4 (thx to sk8erwitskil)
- Frequency steps from 100 to 1200Mhz (default 200-1200)
- Governors same as GB version (default lulzactive)
- Schedulers same as GB version (default VR)
- GPU OC/UV interface (thx to gm, netarchy & myfluxi)
- Full compatibility with NEAK APP FREE/PRO (needs update for pro)
- Reworked lulzactiveV2 governor to use dec_load_cpu parameter (by simone201)
- Fixed sync issues with scaling (thx to entropy & gm)
- Supports: CWM Manager 3.15, Tegrak OC, 2nd Core, lulzactive app, touch move (needs update), Voodoo Louder, SetCPU & Voltage Control
- XZ Compression with optimisations
- Removed 3/4 of the debugging
- Fix for touchscreen sensitivity (thx to vitalij and myfluxi)
- Speedmod's Sharpness FIX (ported, thx to hardcore)
- ARM CPU Topology + sched_mc (thx to linaro)
- Undervolt interface (thx to netarchy, ported by me, gm & myfluxi)
- CGROUP_TIMER_SLACK, RCU_BOOST and many more performance improvements
- Various netfilter options enabled
- Brightness curve mod (thx to gm)
- SLQB memory allocator
- CIFS, TUN, FUSE & CUSE
- BLN v2 support in both AOSP and SAMMY roms (use bln app)
and many more things (check my repo for more infos)

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


SOURCE CODE (2 branches, dev & master): Click Here


Credits:
- Samsung (original sources)
- Hardcore (screen patches + some scripts)
- Gokhanmoral (bus freq control + charging current + some scripts + a lot of help!)
- netarchy (GPU OC/UV + conservative patch)
- Entropy512 (many fixes & patches)
- Tegrak + Vitalij (lulzactive + 2nd core + touch move)
- Cattleprod (some fixes and patches)
- supercurio (voodoo + help)
- linaro (arm topology)
- 89luca89 (GingerMod Updater)
- myfluxi (many patches!)
and many others that have helped or supported me!


by Simone201 & NEAR Team
The Following 164 Users Say Thank You to simone201 For This Useful Post: [ View ] Gift simone201 Ad-Free
 
 
1st April 2012, 06:05 PM |#2  
simone201's Avatar
OP Inactive Recognized Developer
Flag Lecco
Thanks Meter: 4,931
 
Donate to Me
More
Reserved..................tenchars
The Following 17 Users Say Thank You to simone201 For This Useful Post: [ View ] Gift simone201 Ad-Free
1st April 2012, 06:05 PM |#3  
simone201's Avatar
OP Inactive Recognized Developer
Flag Lecco
Thanks Meter: 4,931
 
Donate to Me
More
Another one, just in case..........
The Following 16 Users Say Thank You to simone201 For This Useful Post: [ View ] Gift simone201 Ad-Free
1st April 2012, 06:17 PM |#4  
zenosteam's Avatar
Senior Member
Flag oran
Thanks Meter: 200
 
More
first to replay ,great opening thanks
The Following User Says Thank You to zenosteam For This Useful Post: [ View ] Gift zenosteam Ad-Free
1st April 2012, 06:22 PM |#5  
shawnaye's Avatar
Senior Member
Thanks Meter: 456
 
More
hey simone, does this have AOKP support?
1st April 2012, 06:23 PM |#6  
simone201's Avatar
OP Inactive Recognized Developer
Flag Lecco
Thanks Meter: 4,931
 
Donate to Me
More
Quote:
Originally Posted by shawnaye

hey simone, does this have AOKP support?

Sure! AOSP = AOKP = CM9
The Following 10 Users Say Thank You to simone201 For This Useful Post: [ View ] Gift simone201 Ad-Free
1st April 2012, 06:23 PM |#7  
Goku80's Avatar
Senior Member
Flag Within the Matrix
Thanks Meter: 6,805
 
More
Quote:
Originally Posted by shawnaye

hey simone, does this have AOKP support?

AOKP,AOSP, CM9 the lot yes.

EDIT: Italian stallion is to quick
The Following User Says Thank You to Goku80 For This Useful Post: [ View ] Gift Goku80 Ad-Free
1st April 2012, 06:25 PM |#8  
zodiaxe66's Avatar
Senior Member
Thanks Meter: 482
 
More
That was quick.recharging my phone and flash this Jedi beast.
Thanx mate
Will buy your app when I get my market working again.(non of my apps is visible,weird)
The Following User Says Thank You to zodiaxe66 For This Useful Post: [ View ] Gift zodiaxe66 Ad-Free
1st April 2012, 06:26 PM |#9  
Member
Flag Brazil
Thanks Meter: 6
 
More
congratulations my friend NEAK is back.
The Following User Says Thank You to LexanderMoon For This Useful Post: [ View ] Gift LexanderMoon Ad-Free
1st April 2012, 06:27 PM |#10  
johanlh's Avatar
Member
Thanks Meter: 11
 
More
Thanks in advance, I have been using the NEAK kernel in my GB ROOMs and so far it has been a perfect experience. Keep the good work!
The Following User Says Thank You to johanlh For This Useful Post: [ View ] Gift johanlh Ad-Free
1st April 2012, 06:27 PM |#11  
ludester's Avatar
Senior Member
Flag Toronto
Thanks Meter: 161
 
More
testing...thanks Simone
Post Reply Subscribe to Thread

Tags
amazing uv capabilities!, best kernel, i'm in love with n.e.a.k., ics, neak kernel, optimised, perfectly working with hydrog3nics, stable, super fast

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes