FORUMS
Remove All Ads from XDA

[ROM][GT-I9100P][JB][4.3.1] CyanogenMod 10.2 unofficial

38 posts
Thanks Meter: 63
 
By Qaweck, Member on 5th December 2013, 07:03 PM
Post Reply Email Thread
Unofficial CyanogenMod CM-10.2 for GT-I9100P - Galaxy S2 with NFC

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */
Download:
10.2.1-RC2 15/02/2014
See download tab.

Installation:
First time installing CyanogenMod 10.2 to your Galaxy S II, or coming from another ROM:
- Read the official wiki
- Copy GApps and CM10.2 ZIPs to your internal SDCard
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG. If you're unsure, flash this ClockworkMod-Recovery using Odin/Heimdall.
- Make sure you're running a proper working ClockworkMod-Recovery
- Boot into Recovery
- Flash CM10.2 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10.2 zip from internal SDCard
- Reboot

Upgrading from CyanogenMod 10.1:
- Copy 4.3 GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Reboot

If you comes from a ROM not supporting NFC, reboot an other time in order to have the NFC working.


Sources:

Device: https://github.com/Qaweck/android_device_samsung_i9100p
Patches:
#device/samsung/galaxys2-common
git fetch http://[email protected]/CyanogenMod/android_device_samsung_galaxys2-common refs/changes/00/45800/3 && git cherry-pick FETCH_HEAD
#kernel/samsung/smdk4412
git fetch http://[email protected]/CyanogenMod/android_kernel_samsung_smdk4412 refs/changes/99/45799/2 && git cherry-pick FETCH_HEAD
Build instruction:
  1. Setup you build environment for GT-I9100 (international). This will download all necessary dependencies.
  2. Add Qaweck/android_device_samsung_i9100p to your local manifest + repo sync
  3. Apply above patches
  4. Don't forget to run extract-files.sh to collect the binaries blobs

Credits:
CyanogenMod sources for i9100 & i777


XDA:DevDB Information
[ROM][GT-I9100P][JB][4.3.1] CyanogenMod 10.2 unofficial, a ROM for the Samsung Galaxy S II

Contributors
Qaweck
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod

Version Information
Status: Stable
Current Stable Version: 4.3.1
Stable Release Date: 2013-12-06

Created 2013-12-05
Last Updated 2014-02-16
The Following 10 Users Say Thank You to Qaweck For This Useful Post: [ View ] Gift Qaweck Ad-Free
 
 
5th December 2013, 07:03 PM |#2  
OP Member
Thanks Meter: 63
 
More
Reserved
The Following User Says Thank You to Qaweck For This Useful Post: [ View ] Gift Qaweck Ad-Free
7th December 2013, 10:53 PM |#3  
Viper The Ripper's Avatar
Senior Member
Thanks Meter: 1,074
 
More
Great!
Well done mate! We need our proper roms too

Which bugs have your build? Same as CM10.2 for i9100?

BTW thank you very much!
I'm completly sure the I9100P users will apreciate your work
8th December 2013, 10:58 AM |#4  
OP Member
Thanks Meter: 63
 
More
Quote:
Originally Posted by Viper The Ripper

Great!
Well done mate! We need our proper roms too

Which bugs have your build? Same as CM10.2 for i9100?

BTW thank you very much!
I'm completly sure the I9100P users will apreciate your work

Yes, fore sure, It comes with all standards bugs.

I'm currently fixing bugs when using profiles to change bluetooth or data state.
https://jira.cyanogenmod.org/browse/CYAN-2732

RC1 already contains the fix for bluetooth.
12th February 2014, 09:22 AM |#5  
unubtanium's Avatar
Senior Member
Flag London
Thanks Meter: 55
 
More
Question
@Qaweck From the looks of this, the dev on this has ended. Right?

Reason for asking is that I am looking for a custom ROM that reading NFC tags on the I9100P is works.
I tested this ROM and found that it did not read any tags.
Do you know if it is possible to make a ROM like that?
As i am willing to dedicated a machine for just building roms for our I9100P if needed.
Ps: I am not a dev, but do know how to read and are willing to set of some time to make this work.
12th February 2014, 06:20 PM |#6  
OP Member
Thanks Meter: 63
 
More
I'm current testing the 10.2.1 version. I will upload it soon.
The 10.2 branch is freezed now so you should not expect other build after.

To have nfc woks you must use the original battery which has the antenna built in.



Sent from my Nexus 7 using xda app-developers app
16th February 2014, 05:49 PM |#7  
OP Member
Thanks Meter: 63
 
More
Quote:
Originally Posted by Qaweck

I'm current testing the 10.2.1 version. I will upload it soon.
The 10.2 branch is freezed now so you should not expect other build after.

To have nfc woks you must use the original battery which has the antenna built in.

OK 10.2.1 RC1 uploaded. Go to download tab.
The Following User Says Thank You to Qaweck For This Useful Post: [ View ] Gift Qaweck Ad-Free
21st February 2014, 12:44 PM |#8  
unubtanium's Avatar
Senior Member
Flag London
Thanks Meter: 55
 
More
Quote:
Originally Posted by Qaweck

OK 10.2.1 RC1 uploaded. Go to download tab.

Hey Qaweck, Tnx for this, and will give it a go today... And i am using the original battery..
PS: Still looking for an extended battery with the NFC part like the Korian version of the samsung extended battery pack..

Finally Lunch Break! Flashing time... hehe

---------- Post added at 12:44 PM ---------- Previous post was at 11:48 AM ----------

Just tried out the cm-10.2.1-RC1-i9100p.zip and I did not manage to get it to read any tags..
I do see the NFC option and it is enabled and I also did an extra restart to make sure thing has settled, but again no go with reading tags..
So back to stock for me..

Do anyone know of a Custom ROM for the I9100P that actually read tags?
21st February 2014, 06:29 PM |#9  
OP Member
Thanks Meter: 63
 
More
Did you try android beam with i9100p an other android device ?
Did you test you tag with an other android device ?

I'm using the tags provided in the phone box and its ok.


Sent from my Nexus 7 using xda app-developers app
22nd February 2014, 09:51 AM |#10  
unubtanium's Avatar
Senior Member
Flag London
Thanks Meter: 55
 
More
Question
Quote:
Originally Posted by Qaweck

Did you try android beam with i9100p an other android device ?
Did you test you tag with an other android device ?

I'm using the tags provided in the phone box and its ok.


Sent from my Nexus 7 using xda app-developers app

HI mate


I did try with the two tags the phone reads with stick ROM and I do not use beam, so did not get around to test that, as i just use it for reading tags..

So i find it a bit strange that it reads the tags with stock but not with Custom roms. And this does prove that the tags are fine...

Reason I want it to read the tags is that I am using a NfcRing to unlock the phone, and i SOOOOOO wish i could have that with a custom rom.

But i just do NOT get this, why it does not read the tags. As you say it does fine for you. HUmmm...

DO you have any tips on how i start troubleshoot this???
22nd February 2014, 09:56 AM |#11  
OP Member
Thanks Meter: 63
 
More
First tip: nfc is disabled while the phone is locked.

You can use nfc taginfo to see that the phone can read the tag (unlocked).

Sent from my Nexus 7 using xda app-developers app
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes