Homemade Bootanimations Collection + How To Install/make + Enable/Disable

Search This thread

careingemt

Senior Member
Aug 2, 2014
158
21
Galaxy note 4, no boot animation at all after flash, just black.

Same here on S5

Hopefully anbech will fix .... it does look like there may be a work theme designer
 

wtmdng

New member
Feb 12, 2013
1
0
Had the same problem. Just dirty installed rom in the end and everything was working again.
 

PyroHiroshi

Member
Mar 29, 2010
9
0
Pretoria
S5

Well... Stupid me followed a tutorial for this to get a few of the older animations working on the S5. Unfortunately, it seems, that the Disable zip doesn't allow my old boot animations to work again. Any ideas. The main reason I would like to revert back is because I don't believe that this supports shutdown animations? Right? Anyway.. Hoping to get back to the .qmg files if at all possible.

EDIT: Just read the end of the thread. So Anbech is MIA and no solution other than flashing another ROM. I'll stick with the old animations in the meantime, at least until I update to 5.0
 
Last edited:

3to4

Senior Member
Aug 13, 2009
458
92
Lyon
Worked for ny N7105

CWM_CustomBootanimation_44_Enable.zip worked for my N7105 (Stock rooted, deodexed and deknoxed 4.4.2 ).
Thank you very much. (Bootanimation4U did not work.)
 

Arkandias05

Member
Aug 20, 2012
19
2
Hi !

I am using the lastest version of SlimRom 4.4.4.
I tried to flash the enable bootanim 44 ZIP and after that I tried several custom bootanim, but all I get is a black screen before boot.
Do you know if this the correct bootanim enable for this rom ?
Where comes the issue ?

I tried to fash te disable zip and flash the stock bootanim, but still black screen.
How can have custom bootanim ?

Thanks,
 

luy0

Member
Jul 13, 2015
31
1
25
Lanus, Buenos Aires.
Hi! I created my own custom bootsamsung.qmg and bootsamsunglogo with Samsung Theme designer, but not used an update.zip and not used the zip enabler. Just used Root Explorer and put both files in system/media and replaced the original files (i have backup of both original files) and did reboot to watch how look the bootanimation. Result: it work almost perfect, correct resolution and displaying but it shows TOO FAST! I created two files with Theme Designer with DURATION (FRAMERATE) value 5 and have same result, tried with value 20 and later 25 n' 30 n' 168 n' 200 and always shows that bootanimation TOO FAST! Device details: Galaxy S3 I9300 ROM Stock Unbranded (Argentina) 4.3 JB Stock Kernel ROOTED CWM NON-TOUCH TITANIUM BACKUP XPOSED FRAMEWORK BUSYBOX Firmware I9300XXUGND5. ¿What i must do to make my CBA run with desired framerate? Thanks in advance! And sorry for my bad english, hope you understand.
 

Haphim

Senior Member
Apr 25, 2009
500
46
The OP said this should work for any Samsung phone, but that was also several years ago.

I have a Samsung J710 (internation version of the J7 - 2016 edition) running Marshmallow (Android 6.0.1).

Will this work for me? If so, which file do I flash?
 

force70

Senior Member
The OP said this should work for any Samsung phone, but that was also several years ago.

I have a Samsung J710 (internation version of the J7 - 2016 edition) running Marshmallow (Android 6.0.1).

Will this work for me? If so, which file do I flash?

The last post on this thread before you bumped it was in 2015 lol...so yeah...not alot of support here

The thread itself is 5 years old and from what i remember these work with ICS and JB so unlikely to work on MM.

Id say make a backup and try, if it works or not post back here to let others know the result :thumbup:

Sent from my Note 7, S7 Edge or S6
 

Skjasim

New member
May 19, 2017
4
0
how to enable jarvis Boot animation on samsung s6 noble rom.

Hello my fellow S3 mates!

I’ve made this thread for one purpose: To have all, or almost all, information about bootanimations for stock Samsung ROMs in one thread.

I’m planning to make some bootanimations in the near future, both for ICS and JB. I haven’t made many lately though, because I’ve used almost all my spare time on the bootanimation for the Omega JB rom. I will make some animations now and then, and they will all be posted in this thread

This thread also contains my enable and disables cwm flashable zip-files, and a quick "How-To" guide for making them work.

And finally there are some things to notice before making your own bootanimations, which i of course also have written in this thread. So it’s easy for you to get started.

If you have any questions, need help, or just want to share your custom/homemade bootanimations, feel free to contact me. If it’s because you have a bootanimation to share, I prefer it sended to me as a pm, instead of posting in this thread, as I would like it as clean as possible. Then I can post it in the correct post in this thread, with credits of course. The bootanimation has to be made by you, otherwise it won’t be posted. If it’s made by another creator than you, and you just have modified it to work with S3, you have to get the permission from the original creator.

I’m thinking this would be ideal for a bootanimation collection thread, so it’s easy for other people to find animations, without the need to search through lots of different threads. But this can only be done with your help.

If you have found a bootanimation that you havent made and would like to share it, may i refer to the thread by pkoper here: [Bootanimations] The Bootanimation Repository
as my thread here is more technical based about the subject, and if you make your own, please contact me if you would like it posted in this thread.


If you have any suggestions to this thread, then feel free to pm me, thanks in advance.

---

As you probably noticed, there isn’t much here yet, but in time there will be (hopefully…)
Hlo sir can you help me to how jarvis boot animation intall on samsung s6 noble rom..
 

Tigerevo

Senior Member
Mar 14, 2011
119
28
The last post on this thread before you bumped it was in 2015 lol...so yeah...not alot of support here

The thread itself is 5 years old and from what i remember these work with ICS and JB so unlikely to work on MM.

Id say make a backup and try, if it works or not post back here to let others know the result :thumbup:

Sent from my Note 7, S7 Edge or S6

I am using Samsung J727p running Oreo 8.1 root Magisk , Xposed framework . I found out how to convert boot animations to qmg with Samsung theme . I have cool Batman and Scorpion boot and shutdown animations .
 

Top Liked Posts

  • There are no posts matching your filters.
  • 229
    How to install

    1. If you haven’t already, you should check whether or not your phone is able to play custom bootanimations.

    2. Download this bootanimation.zip, I’ve made only for testing, and place it in /data/local or /system/media folder. Or flash this with CWM: CWM_CustomBootanimation_Test.zip

    3. Reboot, and if it’s still Samsung original booting sequence, it’s not enabled.

    4. If you have a Samsung (touchwiz) based rom (stock), you can easily enable it with my cwm flashable zip, attached to this post.

    5. Download both CWM_CustomBootanimation_Enable.zip and CWM_CustomBootanimation_Disable.zip, and place them at your internal sdcard. The reason I say you should get both, is because when trying out different animations, it can easily mess up the boot. If that happens it’s quite simple to just reboot into cwm, flash the disable zip, reboot, replace the animation with a working one, and reboot into cwm again and flash the enable zip. Should be easy for beginners.

    **The test animation works for both ICS and JB**

    Minimum requirements:
    - CF-root with CWM
    - Busybox

    This has been reported working on:
    [ICS]4.0.4 --> [JB]4.2.1 --> [JB]4.2.2 --> [JB]4.3
    i9300, i9305, Sprint, Verizon and i747m devices.
    Galaxy Note II - N7100
    Galaxy Grand - i9082
    And should in theory work on all other samsung android devices.


    UPDATE:
    made two new flashable zip files, that should work for 4.2.1.. it uses the AOSP "bootanimation"-file, that already has the "bootanimation.zip"-method implemented..
    EDIT: it has been confirmed that this works for the 4.2.2 as well..


    UPDATE2:
    if anyone is having issues having the Anbech-folder on internal sdcard, and cant remove it, then try flash the "CWM_RemoveAnbechFolder.zip"-file from the attachments..


    UPDATE3:
    made 2 new flashzips:
    Code:
    CWM_CustomBootanimation_43_Enable.zip
    CWM_CustomBootanimation_43_Disable.zip
    they should work for any 4.3 sammy rom. make sure to get both files, as the disable-flashzip is handy if anything gets messed up ;)


    UPDATE4:
    2 new flashzips:
    Code:
    CWM_CustomBootanimation_44_Enable.zip
    CWM_CustomBootanimation_44_Disable.zip
    let me know how they work out, as i cant test them myself :)

    if just half of those who uses my work, would hit the thanks-button, i would be very happy :)
    97
    Hello my fellow S3 mates!

    I’ve made this thread for one purpose: To have all, or almost all, information about bootanimations for stock Samsung ROMs in one thread.

    I’m planning to make some bootanimations in the near future, both for ICS and JB. I haven’t made many lately though, because I’ve used almost all my spare time on the bootanimation for the Omega JB rom. I will make some animations now and then, and they will all be posted in this thread

    This thread also contains my enable and disables cwm flashable zip-files, and a quick "How-To" guide for making them work.

    And finally there are some things to notice before making your own bootanimations, which i of course also have written in this thread. So it’s easy for you to get started.

    If you have any questions, need help, or just want to share your custom/homemade bootanimations, feel free to contact me. If it’s because you have a bootanimation to share, I prefer it sended to me as a pm, instead of posting in this thread, as I would like it as clean as possible. Then I can post it in the correct post in this thread, with credits of course. The bootanimation has to be made by you, otherwise it won’t be posted. If it’s made by another creator than you, and you just have modified it to work with S3, you have to get the permission from the original creator.

    I’m thinking this would be ideal for a bootanimation collection thread, so it’s easy for other people to find animations, without the need to search through lots of different threads. But this can only be done with your help.

    If you have found a bootanimation that you havent made and would like to share it, may i refer to the thread by pkoper here: [Bootanimations] The Bootanimation Repository
    as my thread here is more technical based about the subject, and if you make your own, please contact me if you would like it posted in this thread.


    If you have any suggestions to this thread, then feel free to pm me, thanks in advance.

    ---

    As you probably noticed, there isn’t much here yet, but in time there will be (hopefully…)
    38
    Making your own

    This is what you need to know for making your own bootanimations.

    The bootanimation.zip contains at least one folder, typically named "Part0", and a file named: "desc.txt".
    There can be more folders, depends on how many parts there is. This is actually quite smart, as if you want the first part to be showed one time, the second part three times, and the last part untill the phone shows the UI. Then the bootanimation.zip would look something like this:

    ..
    Part0
    Part1
    Part2
    desc.txt

    and the desc.txt file like this:
    720 1280 20
    p 1 0 Part0
    p 3 0 Part1
    p 0 0 Part2

    The first digit - is how many times that part should be played (0 means infinite/forever)
    The last digit - is the delay before the animation begins to play, in milliseconds
    PartX - is the folder with the animation(Part0, Part1, Part2... PartX)

    That was just an example to explain it. you can be as creative as you like, only your imagination sets the limit.

    Inside each PartX-folder is there an animation, showed as images, one image per frame.
    Supported images, from what ive tried myself, is JPEG, JPG and PNG. BMP might work as well, but this would make the zip file large in size.
    The framerate (fps) is set in the desc.txt file, right to the resolution setting:


    An example of a desc.txt which is set to 20 fps.
    I recommend not to set this to high, as the phone is quite loaded at the bootup process, so its a heavy process it to make a animation of images too. I usually set it somewhere between 20 and 25, that is by my own experience, the most smoothly rate.

    When youve made your animation, you should keep in mind if it should be for ICS or JB, or both.
    If its for ICS you should NOT make it looped, otherwise the phone will not show the UI after bootup. Looped animations can ONLY be used with JB.

    The desc.txt file should be created/edited with notepad++ or something similar, as the regular notepad might mess with the structure.

    To pack down the Part-folders and desc.txt file, its just by using winrar, 7zip or something similar. Just set it to save the files only, not compressing it.

    I hope this will come someone handy, and if anyone has something that might be added, corrected, or even deleted, just let me know by a pm.
    37
    JB ONLY boot animations

    This is the collection of bootanimations for ONLY JB roms.
    (Don't use on ICS ROMs or the phone will infinitely loop)


    S3 Logo - Vortex
    CWM_Bootanimation_S3LogoVortex_Preview_Static.gif

    Preview
    Download for S3
    Made by Anbech


    S3 Logo - 01
    CWM_Bootanimation_S3Logo01_Preview_Static.gif

    Preview
    Download for S3
    Made by Anbech


    S3 Logo - Smoke
    s3logofire_preview_static.gif

    Preview
    Download for S3
    Made by Anbech


    Droid RazR M BootAnimation Original and Blue
    Preview Original
    Preview Blue
    Download both here
    Credits to the original creator Matt Groff and therazrguy
    Credits to Kryten2k35 for modifying and making it work
    29
    ICS and JB boot animations

    This is the collection of bootanimations for both ICS and JB roms. (Not looped)
    (Set number of loops till phone starts, which is calculated by the creator)


    Droid RazR M BootAnimation Original and Blue
    Preview Original
    Download both here
    Credits to the original creator Matt Groff and therazrguy
    Credits to Kryten2k35 for modifying and making it work