FORUMS
Remove All Ads from XDA

[RECOVERY][G800F][exynos] [BETA-1] TWRP 2.8

1,733 posts
Thanks Meter: 2,883
 
Post Reply Email Thread
Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE S5 MINI(G800F) [EXYNOS]

PLEASE BE CAREFUL ... THIS RECOVERY HASNT BEEN TESTED "FULLY"...ONLY WIPE CACHE AND DALVIK CACHE , INSTALL ZIP IS TESTED

PLEASE BACKUP YOUR DATA AND MAKE SURE YOU HAVE A BACKUP OF THE FIRMWARE BEFORE PROCEEDING..HAPPY FLASHING!


IF YOU ARE ON A PREVIOUS BUILD ..YOU CAN SIMPLY FLASH THE .ZIP FILE THROUGH RECOVERY TO UPDATE

Why twrp ? Why not a pre-rooted firmware which will not void warranty?

Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !

All you have to do is follow my instructions :

STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !

STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Note Neo logo
-Press vol up to confirm

STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!


-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it

MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON


-Click Start

ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON

HOW TO ROOT THE DEVICE :

-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip

Done ! And you are ready to go

BUGS


YOU TELL ME [/SIZE]

NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY

SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)



CREDITS
TWRP TEAM
@paffo for testing
The Following 20 Users Say Thank You to RVR For This Useful Post: [ View ] Gift RVR Ad-Free
30th October 2014, 09:35 AM |#2  
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 2,883
 
Donate to Me
More
CHANGELOG
Code:
CHANGELOG
BETA ( BUILD3)
FIXED WIPE CACHE AND DALVIK CACHE


BUILD 2
BUMP TO 2.8.1.0 ( CHANGELOG http://teamw.in/project/twrp2)



BUILD 1
INITIAL BUILD
The Following 3 Users Say Thank You to RVR For This Useful Post: [ View ] Gift RVR Ad-Free
30th October 2014, 09:38 AM |#4  
Senior Member
Thanks Meter: 62
 
More
Yeaaa, lets celebrate
Prepared already backup, flashed .zip and wiped dalvik and cashe - all working !
The Following User Says Thank You to paffo For This Useful Post: [ View ] Gift paffo Ad-Free
30th October 2014, 10:09 AM |#5  
Lake292's Avatar
Senior Member
Thanks Meter: 15
 
More
Is there plan for recovery on SM-G800H model?
30th October 2014, 10:22 AM |#6  
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 2,883
 
Donate to Me
More
Quote:
Originally Posted by Lake292

Is there plan for recovery on SM-G800H model?

give me the boot.img ..recovery.img and build.prop .. i will make it
The Following User Says Thank You to RVR For This Useful Post: [ View ] Gift RVR Ad-Free
30th October 2014, 05:47 PM |#7  
RGold55's Avatar
Member
Flag Rio de Janeiro
Thanks Meter: 48
 
More
Quote:
Originally Posted by rutvikrvr

give me the boot.img ..recovery.img and build.prop .. i will make it

Thanks a lot for your work, man!

Here is the link for a boot+recovery package, as extracted from the original firmware available at SamMobile (G800HXXU1ANH9_G800HZTO1ANI1_ZTO.zip):

https://dl.dropboxusercontent.com/u/...%202014_10.tar

TIA!

Oops... forgot build.prop -- here it goes:

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.G800HXXU1ANH9
ro.build.version.incremental=G800HXXU1ANH9
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Aug 14 07:42:14 KST 2014
ro.build.date.utc=1407969734
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6003
ro.build.tags=release-keys
ro.product.model=SM-G800H
ro.product.brand=samsung
ro.product.name=kmini3gxx
ro.product.device=kmini3g
ro.product.board=MSM8228
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
ro.build.product=kmini3g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=kmini3gxx-user 4.4.2 KOT49H G800HXXU1ANH9 release-keys
ro.build.fingerprint=samsung/kmini3gxx/kmini3g:4.4.2/KOT49H/G800HXXU1ANH9:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=G800HXXU1ANH9
ro.build.hidden_ver=G800HXXU1ANH9
ro.build.changelist=2114953
ro.product_ship=true
ro.chipname=MSM8228
ro.config.rm_preload_enabled=0
ro.build.knox.container=
persist.sys.storage_preload=1
# end build properties
#
# from device/samsung/kmini3g/system.prop
#
#
# system.prop for msm8974
#

rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1

ro.sf.lcd_density=320

debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false

ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491

# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#

# RIL team modification
# netmgrd should be false in EVO-RIL model
ro.use_data_netmgrd=false


# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false

ro.data.large_tcp_window_size=true

#system props for time-services
persist.timed.enable=true

#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608

# System property for cabl
ro.qualcomm.cabl=1

#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0

# System proverty for sys info indication
persist.radio.add_power_save=1


# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1

#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true

#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true

ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true

#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4

# System property for storage_preload
persist.sys.storage_preload=1

# DHA Property
ro.config.dha_cached_max=12
ro.config.dha_empty_max=42
ro.config.dha_step=2
ro.config.dha_update_max_count=8
ro.config.dha_whitelist_enable=1

#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
sysprof.activitythread.slowloop=300
sysprof.choreographer.skip=15
sysprof.inputdispatcher.slow=500
sysprof.inputdispatcher.stale=500
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.sec.fle.encryption=true
ro.securestorage.support=true
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_ligh t.ogg
ro.error.receiver.default=com.samsung.receiver.err or
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4_r4
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.knox=v30
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.gps.agps_provider=1
The Following User Says Thank You to RGold55 For This Useful Post: [ View ] Gift RGold55 Ad-Free
30th October 2014, 08:42 PM |#8  
DönerXXL's Avatar
Member
Flag Hamburg
Thanks Meter: 23
 
More
You are my Man. Thank you so much Brother.

I flashed it and it runs well.

Has anyone made ​​a backup and restore it successfully ?
The Following User Says Thank You to DönerXXL For This Useful Post: [ View ] Gift DönerXXL Ad-Free
30th October 2014, 10:22 PM |#9  
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 2,883
 
Donate to Me
More
Quote:
Originally Posted by RGold55

Thanks a lot for your work, man!

Here is the link for a boot+recovery package, as extracted from the original firmware available at SamMobile (G800HXXU1ANH9_G800HZTO1ANI1_ZTO.zip):

https://dl.dropboxusercontent.com/u/...%202014_10.tar

TIA!

Oops... forgot build.prop -- here it goes:

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.G800HXXU1ANH9
ro.build.version.incremental=G800HXXU1ANH9
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Aug 14 07:42:14 KST 2014
ro.build.date.utc=1407969734
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6003
ro.build.tags=release-keys
ro.product.model=SM-G800H
ro.product.brand=samsung
ro.product.name=kmini3gxx
ro.product.device=kmini3g
ro.product.board=MSM8228
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
ro.build.product=kmini3g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=kmini3gxx-user 4.4.2 KOT49H G800HXXU1ANH9 release-keys
ro.build.fingerprint=samsung/kmini3gxx/kmini3g:4.4.2/KOT49H/G800HXXU1ANH9:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=G800HXXU1ANH9
ro.build.hidden_ver=G800HXXU1ANH9
ro.build.changelist=2114953
ro.product_ship=true
ro.chipname=MSM8228
ro.config.rm_preload_enabled=0
ro.build.knox.container=
persist.sys.storage_preload=1
# end build properties
#
# from device/samsung/kmini3g/system.prop
#
#
# system.prop for msm8974
#

rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1

ro.sf.lcd_density=320

debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false

ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491

# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#

# RIL team modification
# netmgrd should be false in EVO-RIL model
ro.use_data_netmgrd=false


# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false

ro.data.large_tcp_window_size=true

#system props for time-services
persist.timed.enable=true

#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608

# System property for cabl
ro.qualcomm.cabl=1

#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0

# System proverty for sys info indication
persist.radio.add_power_save=1


# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1

#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true

#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true

ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true

#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4

# System property for storage_preload
persist.sys.storage_preload=1

# DHA Property
ro.config.dha_cached_max=12
ro.config.dha_empty_max=42
ro.config.dha_step=2
ro.config.dha_update_max_count=8
ro.config.dha_whitelist_enable=1

#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
sysprof.activitythread.slowloop=300
sysprof.choreographer.skip=15
sysprof.inputdispatcher.slow=500
sysprof.inputdispatcher.stale=500
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.sec.fle.encryption=true
ro.securestorage.support=true
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_ligh t.ogg
ro.error.receiver.default=com.samsung.receiver.err or
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4_r4
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.knox=v30
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.gps.agps_provider=1

THIS IS ONLY FOR THE QCOM VERSION(G800H)
PLEASE TRY THIS
s.basketbuild.com/devs/rutvikrvr/kmini3g/twrp

FOLLOW INSTRUCTIONS FROM OP
The Following User Says Thank You to RVR For This Useful Post: [ View ] Gift RVR Ad-Free
30th October 2014, 10:45 PM |#10  
RGold55's Avatar
Member
Flag Rio de Janeiro
Thanks Meter: 48
 
More
I know the OP refers to the 800F model; I was just providing you a feedback as to your previous reply, message #6: "give me the boot.img ..recovery.img and build.prop .. i will make it".

And thank you very much for the 800H link -- will try it right now!
30th October 2014, 10:50 PM |#11  
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 2,883
 
Donate to Me
More
Quote:
Originally Posted by RGold55

I know the OP refers to the 800F model; I was just providing you a feedback as to your previous reply, message #6: "give me the boot.img ..recovery.img and build.prop .. i will make it".

And thank you very much for the 800H link -- will try it right now!

By the last line I meant... If u have any doubts about how to flash.... Read the instructions in the OP., Nothing else
The Following User Says Thank You to RVR For This Useful Post: [ View ] Gift RVR Ad-Free
Post Reply Subscribe to Thread

Tags
rutvikrvr, s5 mini, twrp

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes