stang5litre Edition 5.0 s9+ Pie v1
2) Download Rom and Put on SD or Internal Storage
3) Select normal wipe, no need to do advanced wipe. Then Swipe
4) Select Install And Pick stang5litre Rom
5) Flash / Swipe
6) Select Install And Pick stag5litre_ODM
7) Flash / Swipe
8) After Boot Let Apps Update before you start making changes!!! 10-15mins
Instructions For Beginners
Samsung Mobile Driver
Klabit87 S9+ Pie Root Zip (g9650_pie_root_v2.zip)
Klabit's Root Thread
Magisk Manager (MagiskManager-v7.0.0.apk)
Krog18 ODM Zip (s9+_ODM_combo_PIE_MOD_ATTVZWUSCTMXAA_V2.zip)
stang5litre Pie ROM (stang5litre_Edition_5.0_v1_Pie.zip)
stang5litre ODM Zip (stang5litre_ODM.zip)
Pie Stock Firmware (SM-G9650ZHU3CSAB (Pie).zip) (Goes on your computer to be flashed via Odin)
TWRP (twrp-3.2.3-0-star2qltechn.img.tar) (Also goes on your computer to be flashed in Odin)
WARNING!!! DO NOT FLASH KROG ODM ZIP UNLESS YOU ARE ON A U.S. CARRIER (ATT, SPR, VZW, USC, TMB, XAA). IF YOU ARE NOT ON A U.S. CARRIER YOU MUST FLASH YOUR CARRIER'S ODM!!
READ OVER ALL THE STEPS BEFORE YOU BEGIN TO GET AN OVERVIEW OF THE PROCEDURE THEN MAKE SURE TO READ EACH STEP ENTIRELY BEFORE STARTING THE STEP!
1.Boot phone into download mode by holding down Power + Volume Down + Bixby and plug phone into computer. Odin Full Pie Firmware (SM-G9650ZHU3CSAB (Pie).zip). You must extract all the files from this zip in order to load them into Odin. Make sure to use the CSC file that DOES NOT contain the word "Home" in it. Before flashing, click the "Options" tab in Odin and make sure "Auto Reboot" is NOT checked. Flash.
2.When it is done flashing, hold Power + Volume Down until the screen turns black then IMMEDIATELY switch to holding down Power + Volume Down + Bixby to reboot into download mode.
3.In Odin, press the "Reset" button. Load twrp-3.2.3-0-star2qltechn.img.tar into the AP slot and once again make sure that Auto Reboot is NOT checked in the "Options" tab. Flash. If for some reason it fails on you, unplug the cable from the computer, reboot the computer, load Odin up and have it ready to go then hold down Power + Volume Down + Bixby and reboot the phone into download mode, connect the cable back to the computer and try again.
4.When it is done flashing, hold Power + Volume Down until the screen turns black then IMMEDIATELY switch to holding down Power + Volume Up + Bixby to boot into recovery (TWRP). If you fail to do this properly and it does not boot to recovery immediately hold down Power + Volume Down + Bixby to get back to download mode before it boots into system then try this step again.
5.Once in TWRP "swipe to allow mods" then click the Mount button then the Select Storage button and choose the external SD card.
6.Click the Install button and locate and select g9650_pie_root_v2.zip (which should be on your external SD card). UNCHECK "Reboot after installation is complete". Flash. If you DO NOT want data encrypted then go back to the main screen, select "Wipe" then choose "Format Data".
7.Press back until you reach the main TWRP screen then click the Install button once again. Locate and select stang5litre_Edition_5.0_v1_Pie.zip. Then click the "Add more zips" button and locate and select s9+_ODM_combo_PIE_MOD_ATTVZWUSCTMXAA.zip. Once again choose "Add more zips" and locate and select stang5litre_ODM.zip. This time make sure "Reboot after installation is complete" is CHECKED! Flash.
8.Phone will then reboot and you will sit on the splash screen for a few minutes then it'll load to setup. Run through setup then Install MagiskManager-v7.0.0.apk ONLY IF you formatted Data in TWRP in step 6. Magisk may show as not installed until after you reboot.
Call recording unlocked
Menu Message share enabled
Notification reminder support added
Gradiant Status Bar Mod Added
3 Minit Battery Mod Added
Enabled RIL power saving features.
Enabled the camera during calls.
Added Screen Capture Toggle
Added Screen Recording
Theme Store Unlocked
stang5litre Boot Animation
Klabit Kernel with Govs
Bike Mode Added
Well Being Added
11 Options In Power Menu Added
Invert Colors Toggle Added
Cast Toggle Added
Unlock After Boot With Finger Print Added
High Volume Warning Removed
- The ROM will not update your Modem
- The Rom will update System to SAB
- All Knox, and All Amazon apps etc.
- This ROM does not change your bootloader
- NEED TO BE ON PIE BOOTLOADER!!!
- 9.0 TouchWiz Based 9.0 Experience OneUI
This Rom is able to be installed on the Galaxy s9+ Using TWRP
I am not responsible for anything that may happen or happens to your phone as a result of this custom firmware/Rom. You are choosing to install this yourself and thus assume any/all risks involved
@sammy- For Source
@klabit87- Kernel, Advanced Tester, TWRP
@gharrington- 3mint Mods
@jrkruse - Expert Advising, And To Much To Post
@Krog18- Over Half the Mods, Advanced Tester
@gadget! - Boot Animation!
@biikman - Advanced Tester
@tylerhole - Advanced Tester, Simple Pie Instructions
@Bren123 - Advanced Tester
Klabit Kernel Thread Link
Follow Me On: