FORUMS
Remove All Ads from XDA

 View Poll Results: Which One?

Its OK for now
 
8 Vote(s)
57.14%
Its need a lot of improvement
 
0 Vote(s)
0%
The best thing ever
 
2 Vote(s)
14.29%
Please add more feature!!
 
1 Vote(s)
7.14%
Please fix all the bug
 
5 Vote(s)
35.71%

[Kernel] Thunderoar Kernel v5.0 [SM-T116](24 Dec 2017)

195 posts
Thanks Meter: 119
 
By Thunderoar, Senior Member on 20th September 2016, 03:17 PM
Post Reply Email Thread
Thunderoar Kernel For SM-T116
(Tab 3 Lite 7.0 3G)

* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.

Features:
Overclocked
Deferred Timer for KSM
USB Fast Charge
Arch Power
Frandom
Powersuspend for battery life/saving
QuickWakeup for battery life/saving
Dynamic Sync Control
Fsync control on/off
Voltage Tweak
NVS hibernate driver
Multicore Power Saving
Schedule workqueues on awake CPUs to save power
CPU Boost
Adaptive Low Memory Killer
Software CRC control toggle
Gentle Fair Sleepers toggle
and so on...

CPU Hotplug:
AutoSMP


Added CPU governors:

Sprdemand
Conservative
Ondemand
Userspace
Powersave
Interactive
Performance

and so on...

Planned Update
-nothing i guess

Bugs(s)
-No MORE BUG!

Custom kernel Installation:
Download the kernel from here
Choose the tar.md5 if flashing from odin
Choose the zip files if flashing from custom recovery
Choose the latest version
Odin Instruction:
Open any version of odin
Choose your tar.md5 file from AP Tab
And Start
Custom Recovery Instruction:

Reboot into recovery if usin zip files (recommended to make a nandroid)
Flash the kernel zip
Reboot and enjoy!

Stock kernel Installation:
Download the stock kernel from here
Enter recovery mode, choose install, choose install image,
and then go to the directory of your downloaded stock kernel
choose it and then check mark on the boot circle.
And then flash it

Notes:
20/12/2107
Kernel Update!!
Thunderoar-Kernel 5.0 Codenamed "Angel Beats!"
Fix all issues regarding MTP not working
and random reboot, is this a comeback? xD, i don't know xD
It appears that my kernel uses a lot more memory than i expected,
Possibily some problem with memory patch in the kernel source
The workaround for this problem is you have to increase your disksize
In the kernel adiutor, if it stays at 300mb, it will not enough and cause a problem
Which is stuck or complete crash of device. Recommended size is 500mb or more if
you encountered it again and set swappiness into 60

20/11/2017
Im back guyss, im out for awhile because my current kernel are sucks,
So i got a new phone which is Samsung J5, im developing kernel for the J5 for my
my own use, Not for sharing others because it will hurt my reputation XD,
and from that i learned a lot more about developing a good kernel,
Im goin to update the kernel using newer source, and im able to fix the
MTP and random reboot issues which is make me happy, its going out soon,
So if you guys still usin this device, you can use the new kernel that i will
post soon.


5/7/2017
For those of you who had a booting problem,
the V4.1.1 probably will fix it


3/7/2017
Finally, an actual stable one,
Rebuilt from the newest source from scratch
-V4.1-revived-version

22/6/2017
The new one probably the most stable,
been testing it for a week and so
far no problem or frequent reboot happen or
something like that

7/5/2017
Finally!!! Camera are fixed guys!
MTP functionality is still unconfirmed
Sorry for the long wait ^-^

1/1/2017
I decided to release a maintenance release update cause i found
that the device crash many times throughout all my kernel
and i decided to think about it more seriously and i had made
a maintenance release for you and report me if there still
crash happening on the device

27/12/2016
I wanted to release the kernel a little bit early cause
busy with new year celebration.The latest one is Thunderoar Kernel v2.6
Happy New Year to all of you!! sorry if i'm being too early

18/12/2016
I'm going get the new kernel ready next month which is the new year.
I'm gonna support SM-T113 too next year and continue with it *if it's working*
I'm going to need tester for sm-t113 next year

1/11/2016
enable the usb fast charge using the kernel adiutor app!
Camera are working on the stock kernel but not mine...
The source code for the camera is not exist in the source...
If you wanna connect your device to pc make sure the
USB fast charge is off,if it isn't disabled,you won't able to
manage file on your device through pc


XDA:DevDB Information
Thunderoar Kernel, Kernel for the Samsung Galaxy Tab 3 7.0

Contributors
@Thunderoar
Credits:
@Osm0sis-For the Anykernel2
Github
Kernel source

Version Information
Status: Stable
Current Stable Version: Angel Beats! || 5.0
Stable Release Date: 2017-12-24

Created 2016-12-26
Last Updated 2017-12-24

Press the "Thanks" button if you appreciate my work or if i helped you
The Following 18 Users Say Thank You to Thunderoar For This Useful Post: [ View ] Gift Thunderoar Ad-Free
20th September 2016, 06:06 PM |#2  
Account currently disabled
Flag sakarya
Thanks Meter: 52
 
More
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
20th September 2016, 06:28 PM |#3  
Thunderoar's Avatar
OP Senior Member
Flag Malacca
Thanks Meter: 119
 
More
Quote:
Originally Posted by gr9nole

Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??

Ok,but what android you are currently using right now?Kitkat or JB?
The Following 3 Users Say Thank You to Thunderoar For This Useful Post: [ View ] Gift Thunderoar Ad-Free
20th September 2016, 07:30 PM |#4  
Thunderoar's Avatar
OP Senior Member
Flag Malacca
Thanks Meter: 119
 
More
Changelog:

V5.0 Codenamed "Angel Beats!" (2017-12-24)
+Kernel upstream version 3.10.17->3.10.108
+Gpu update
+Fix MTP
+CPU Frequency change 200MHz upto 1.5GHz
+Entropy Update
+Multicore Power Saving
+CPU Boost
+Arch Power
+Power Suspend
+Quickwakeup
+Read-ahead set to 512kB
+Adaptive Low Memory Killer
+Software CRC control
+Gentle Fair Sleepers
+Fsync On/Off
+Built from scratch and fixed random reboot
+Dynamic Fsync
-Removed Obselete Cpu Governor
-Removed Obselete I/O Scheduler
-Removed UKSM and use normal KSM [HIDE]V4.1.1 update (2017-7-5)
+Fix some devices not booting
+New CPU Hotplug: AutoSMP

V4.1 update (2017-7-3)
+Just another update for stability

V4.0 update (2017-7-3)
+No more Reboot or similar effect - Tested
+Linux kernel downgraded into 3.10.32 temporarily because rebuilt from scratch
+Auto cpu boost on input without predefined frequency
+UKSM(Ultra Kernel Samepage Merging)
+LZ4 Z-RAM - Faster Memory
+Asynchronous Fsync -Faster storage management
+USB Fast Charge are back
-Removed cpu governor: OndemandX, Zzmoove, Scary *Temporary*

V3.4 update (2017-6-22)
+The most stable kernel that i've ever built
+Linux Kernel 3.10.44
+No more frequent reboot or similar effect
+Bug fixes

V3.3 update (2017-6-17)
+Linux Kernel 3.10.40
+Properly fix the bug that mentioned on the v3.2 update and lower the risk of instability
+A bunch of cpu governor
*Hotplug
*Lionheart
*Reworked version of intelliactive
*Ondemandplus
*OndemandX
*Hyper
*Zzmoove
*Nightmare
*Wheatley
*Badass
*Scary
*All of them are properly functioning and tuned for compatibility
and if you want the hotplug features, use the hotplug governor provided
+Bug Fixes
-Adaptive cpu governor removed parmanently

V3.2 update (2017-6-8)
+Update: Linux Kernel 3.10.37
+Update: Using the latest Anykernel2 zip
+Update: Minimum frequency change into 254MHz and also voltage change for nice battery lasting
+Update: cpu-boost set to 765MHz and running for 3 seconds when touch detected
+Update: Set CFQ as default scheduler
+Fix: Bug that cause long running app either in the background or foreground to freeze/lagging/reboot etc.
+Fix: Bug that cause the device to reboot randomly
+Fix: Bug that cause the graphic being not working/properly lagging or some sort
+Fix: Bug that cause the device to reboot or freeze when standby
+Fix: Bug that causing the kernel to working improperly/lagging/rebooting/unstable after a while
+Bug fixes

V3.1 update (2017-5-7)
+CPU Frequency minimum change -> 384MHz
+Fix Frequency bug stuck at 768MHz
+Faster charging

V3.0 update (2017-5-7)
+Kernel version updated from 3.10.22 - > 3.10.26
+Using updated Anykernel zip
+Frequency: changed into 1600Mhz and minimum is 386Mhz
+GPU: function updated
+Deferred Timer working as it is
+LZ4 compression
+"Schedule workqueues on awake CPUs to save power" are back
+Remove conflict between Samsung touch booster and my CPU-Boost so you can actually set the amount you want
for boost
+Sync threshold for cpu-boost are not set
+I/O scheduler default to deadline
+Fsync are on by default
+TCP Congestion Algorithm set default to Westwood which is the fastest for network usage
+Additional TCP Congestion Algorithm are added
+Additional tweak to make the kernel faster
+Camera Fix!!!
+MTP Function (unconfirmed)
+A whole lot of bug fixes
-sprdemand governor
-Fastcharge (for now)

V2.8 update (2017-1-31)
+Frequency: changed into 1660Mhz and minimum is 580Mhz
+Cpu-boost: defined stable values
+Less OS tearing
+Fastcharge updated
+Audio functionality improved
+Voltage: change for low-power use
+Many bug fixes
+Selinux: updated
-Automatic Cpu Hotplug: removed for better stability but with little to no battery drainage but you still can deactivate the cores through Kernel Adiutor
-Sprdemand: removed

V2.6.1-MR1 update (2017-1-1)
*Note:This is maintenance release therefore some features may temporarily unavailable
Add: cpu-boost currently disabled but provided as an option
Add: voltage change
Add: frequency change from 386Mhz to 1600Mhz for more stable
Fix: serious bug that causing switching off mobile data make it freeze/crash
Fix: bug that causing the device freezing/crash throughout all my kernel update release

V2.6 a.k.a *Almost* New Year Update (2016-12-27)
+Kernel version updated from 3.10.17 - > 3.10.22
+Frequency step changed to make it more stable
+GPU overclocked upto 640Mhz
+CPU-Boost re'added,improve stability and Frequency set
*"Schedule work queues on awake CPU to save power"
\_disabled by default because instability issue on booting but kept as an option in Kernel Adiutor
\_Its pretty unstable so i didn't recommend you to use it
+This updates focus heavily on stabilily,sound,memory and networking
+Zswap Added
+Zbud Added
*Swappiness level turn down to 10 to avoid using swap as much as possible but use it when low memory
\_The reason of me to use swap as low as possible is RAM is faster than swap,so use that for better
\_application loading.
*No more SOD(Sleep Of DEATH) OR FOD(Freezing Of DEATH) as it happen many times on my older kernel
\_but it *may* happen
+Voltage increased for more stability
+Dynamic Sync re'added and enabled by default
+Fsync turn off by default
+Overall entropy tweak
+SIO,SIO-Plus scheduler re'added
-Row scheduler

V2.0 a.k.a November update (2016-11-1)
+1650 mhz re'added and step changes
+Fsync on/off re'added
+Row scheduler re'added
+Intelliactive Governor re'added
+BLX(Battery life extender) added
+Adaptive Governor added
+Lagfree Governor added
+Schedule work queues on awake CPU to save power
+Fixed unused frequencies on kernel adiutor
+Improved networking capability
+Improved memory management
+Improved security so you don't have to install antivirus
+Improved web browsing
+Improved device battery
-Dynamic sync have to go for now
-cpu boost removed because of compability issue

V1.7 (2016-10-15)
+Deferred Timer
+Cpu boost frequency set
+Updated Dynamic sync control
+Interactive governor updated and used as default governor
+HUGE bug fixes (better than before)
-Fsync On/Off (parmanent maybe)


V1.3 (2016-09-25)
+NVS hibernate driver
+LZ4 compression support
+Snappy compression library (v3)
+Many bug fixes(It is very smooth,surprisingly)
+Frequency changed to 1650MHz
-intelliactive governor (for now)
-row i/o scheduler (for now)
-sioplus i/o scheduler (for now)


V1 (2016-09-20)
+Initial Release
The Following 5 Users Say Thank You to Thunderoar For This Useful Post: [ View ] Gift Thunderoar Ad-Free
21st September 2016, 09:38 AM |#5  
andynroid's Avatar
Senior Member
Flag Klang Valley
Thanks Meter: 446
 
Donate to Me
More
How about for the SM-T211 on KKat ?
,
,
Be great too...

Sent from my SM-T211 using Tapatalk
21st September 2016, 05:59 PM |#6  
Thunderoar's Avatar
OP Senior Member
Flag Malacca
Thanks Meter: 119
 
More
Quote:
Originally Posted by andynroid

How about for the SM-T211 on KKat ?
,
,
Be great too...

Sent from my SM-T211 using Tapatalk

yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
The Following User Says Thank You to Thunderoar For This Useful Post: [ View ] Gift Thunderoar Ad-Free
21st September 2016, 08:18 PM |#7  
andynroid's Avatar
Senior Member
Flag Klang Valley
Thanks Meter: 446
 
Donate to Me
More
Quote:
Originally Posted by Thunderoar

yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?

The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...

Sent from my SM-T211 using Tapatalk
22nd September 2016, 09:43 AM |#8  
Thunderoar's Avatar
OP Senior Member
Flag Malacca
Thanks Meter: 119
 
More
Quote:

The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...

Sent from my SM-T211 using Tapatalk

I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
The Following 2 Users Say Thank You to Thunderoar For This Useful Post: [ View ] Gift Thunderoar Ad-Free
22nd September 2016, 11:34 AM |#9  
andynroid's Avatar
Senior Member
Flag Klang Valley
Thanks Meter: 446
 
Donate to Me
More
Quote:
Originally Posted by Thunderoar

I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device

Sure why not.....

Sent from my SM-T211 using Tapatalk
22nd September 2016, 12:19 PM |#10  
Thunderoar's Avatar
OP Senior Member
Flag Malacca
Thanks Meter: 119
 
More
Quote:
Originally Posted by andynroid

Sure why not.....

Sent from my SM-T211 using Tapatalk

ok,good,gonna start downloading the source code soon
The Following 2 Users Say Thank You to Thunderoar For This Useful Post: [ View ] Gift Thunderoar Ad-Free
26th September 2016, 10:48 AM |#11  
Account currently disabled
Flag sakarya
Thanks Meter: 52
 
More
Quote:
Originally Posted by Thunderoar

Ok,but what android you are currently using right now?Kitkat or JB?

jb 4.1.2 android please
sample werewolf kernel v003 good kernel add your tweaks oc ... thanks

note:I have tab 3 sm-t210 I now test kernel

ı using jb
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes