FORUMS

[ROM][7.1.2][UNOFFICIAL] LineageOS 14.1 - SM-T800

1,915 posts
Thanks Meter: 4,729
 
By DarkExistence, Senior Member on 26th January 2017, 12:40 AM
Post Reply Email Thread
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.



Code:
#include <std_disclaimer.h>

/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at us for messing up your device, we will laugh at you.
 *
 */
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


This thread is for Official LineageOS 14.1 builds for chagallwifi (SM-T800) The following will not be supported here:
Custom kernels
Mods
Xposed

I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Have not attempted a clean flash


First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot

Make sure you have the Marshmallow bootloader. Guide is in the comments below.


There will be a new build every week, every Monday.
The builds will no longer be personally tested by me before being uploaded (but everything will probably be fine)
Change logs will no longer be posted within every new build, but instead when the changes are uploaded to GitHub. I will try though to post changes for major bugs or fixes as they are released.
Some builds might feature only minor changes, ie. only updating the LineageOS source

Chagallwifi Download

Google Apps:
Beans GAPPS 7.1.2

Kernel
https://github.com/LineageOS/android...ung_exynos5420
Device Tree
https://github.com/LineageOS/android...ng_chagallwifi


Aytex, who made all of the banners on this post.
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
The Following 65 Users Say Thank You to DarkExistence For This Useful Post: [ View ] Gift DarkExistence Ad-Free
26th January 2017, 12:42 AM |#2  
DarkExistence's Avatar
OP Senior Member
Flag Cork
Thanks Meter: 4,729
 
Donate to Me
More

Fingerprint is disabled

Other issues?
Before posting in this thread, make sure of a few things:


You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog
The Following 23 Users Say Thank You to DarkExistence For This Useful Post: [ View ] Gift DarkExistence Ad-Free
26th January 2017, 12:42 AM |#3  
DarkExistence's Avatar
OP Senior Member
Flag Cork
Thanks Meter: 4,729
 
Donate to Me
More
For OTA updates to flash correctly:
Update your TWRP to 3.1.0-1 (USE THE 2017-05-04 BUILD OR LATER. DO NOT USE A BUILD FROM BEFORE THIS DATE)
You can get Official TWRP 3.1.0-1 for chagallwifi from this link!
TWRP for CHAGALLWIFI
This updated TWRP recovery image contains a fix that will allow it to flash OTA updates properly!
The Following 23 Users Say Thank You to DarkExistence For This Useful Post: [ View ] Gift DarkExistence Ad-Free
26th January 2017, 12:46 AM |#4  
DarkExistence's Avatar
OP Senior Member
Flag Cork
Thanks Meter: 4,729
 
Donate to Me
More
How to update to Marshmallow bootloader (required for 20170324 and later builds)
Updating the bootloader is very quick and doesn't wipe data or repartition the device.
If the last Samsung ROM you had was 6.0.1 Touchwiz, you already have Marshmallow bootloader and don't need to follow these steps. (If you were on MM, and it still won't boot, follow the steps below)

1. Download the bootloader-only Odin package: T800XXU1CPK2.tar.md5
This has the latest Marshmallow bootloader (December 2016)
https://www.androidfilehost.com/?fid=457095661767146298
2. Download Odin 3.11
You can skip this if you already have a working Odin
https://www.androidfilehost.com/?fid=673368273298937183
3. Shutdown your tablet and start it up by holding Power+Home+Volume Down to enter Download Mode. Volume Down is the one right next to the power button. Really shut it down and use this key combination, if you use Advanced Restart, or go into download mode via TWRP the bootloader won't change.
4. Make sure the screen of your tablet has a green android symbol with a "Downloading..." text
5. Open Odin3_v3.11.1.exe and follow the instructions in this image:


If anything is missing, you WON'T flash bootloader successfully.
6. Click Start. Your tablet will automatically reboot back into your ROM.
7. To verify you have the new bootloader, you can run in terminal emulator "getprop ro.bootloader". It should say T800XXU1CPK2.

Thanks @ZakooZ for the post!
The Following 22 Users Say Thank You to DarkExistence For This Useful Post: [ View ] Gift DarkExistence Ad-Free
26th January 2017, 12:47 AM |#5  
DarkExistence's Avatar
OP Senior Member
Flag Cork
Thanks Meter: 4,729
 
Donate to Me
More
Deathly Adiutor App

Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.

Features
Power Saving:
  • S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
  • S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
  • Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
  • Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
  • Touchscreen Glove Mode (Not all screens support this)

CPU Control:
  • CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
  • CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)

GPU Control:
  • GPU Time in States - Same as CPU Time in States (Times in each frequency)
  • GPU Frequency Control (not yet supported on Nougat)
  • GPU Voltage Control (not yet supported on Nougat)
  • GPU Governor Control (not yet supported on Nougat)

Battery control:
  • Full power statistics - See current and maximum charging currents and current source of power
  • Unstable power source detection - Lowers current until the power source is stable
  • Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
  • Screen-On current limiter - Limit charging if screen is on (to avoid overheating)

Speakers:
  • Privacy mode - Disable main speaker if headphones are plugged in
  • Earpiece volume
  • Left/Right speaker volume
  • Speaker equalizer

Headphones:
  • Left/Right channel volume
  • Mono output mode
  • Headphone equalizer

App Themes:
  • Light theme - White and Red
  • Dark theme - Grey and Red

Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT @DarkExistence

Translators:
@ShevT - Russian

The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code

Downloads
The app can be found in the Play Store:
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.

Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
The Following 17 Users Say Thank You to DarkExistence For This Useful Post: [ View ] Gift DarkExistence Ad-Free
26th January 2017, 05:45 AM |#6  
Member
Thanks Meter: 7
 
More
Thx for your work
Looking forward to testing it out
The Following User Says Thank You to abushami For This Useful Post: [ View ] Gift abushami Ad-Free
26th January 2017, 01:25 PM |#7  
Eboshi Moriyama's Avatar
Member
Thanks Meter: 37
 
More
Thank you very much for your work!
The Following User Says Thank You to Eboshi Moriyama For This Useful Post: [ View ] Gift Eboshi Moriyama Ad-Free
26th January 2017, 10:00 PM |#8  
Eboshi Moriyama's Avatar
Member
Thanks Meter: 37
 
More
It doesn't works for me, I only see boot animation and it doesn't start even after 20 minutes. I tried Paulicat version and works fine. Whi? I did a clean flash.
27th January 2017, 12:19 AM |#9  
Senior Member
Thanks Meter: 87
 
More
Same for me. Bootllop after flashing ROM and latest Gapps (nano).
27th January 2017, 12:53 AM |#10  
BananaPrime's Avatar
Junior Member
Thanks Meter: 0
 
More
Yeah, bootlooping.
27th January 2017, 01:42 AM |#11  
neozen21's Avatar
Senior Member
Flag Henderson, NV
Thanks Meter: 130
 
More
Quote:
Originally Posted by BananaPrime

Yeah, bootlooping.

I installed with a full wipe (including internal sdcard), using latest pico gapps.
No issues...
I also recently updated my bootloader to Mashmallow, but I doubt that's what makes mine bootup while some bootloop.
The Following 3 Users Say Thank You to neozen21 For This Useful Post: [ View ] Gift neozen21 Ad-Free
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes