M6+ Pocket Dlp Projector with Android 4.4.4 unpacking & first test

395 posts
Thanks Meter: 220
By contrinsan, Senior Member on 23rd December 2015, 04:02 PM
Post Reply Email Thread

Got myself a 'made in China' pocket projector.
It only has the size of a phone and has a 5000mah battery so it's easy to enjoy a big screen everywhere.
(A full battery gives about 2 hours and 15 minutes of projection time at full brightness and the projector easily goes over 100 inch in projection size)
It has Wifi & Bluetooth, 2 usb connections, an infra red receiver, a hdmi out, earphone/line-out and runs on Android 4.4.4.
The usb makes it easy to connect harddisk, memory stick,.. but also things like keyboard & mouse. (you can also use it as a powerbank to charge your phone.-
The built in speaker has 1 Watt and sounds quite loud for this little device but it has no bass so you can connect it also to a soundsystem with the line out (or wireless with bluetooth) for better sound experience
It has a native 854 by 480 resolution, which is not HD but as you see in the youtube video it is a very clear and sharp image.
The built-in media player supports about every music, video and picture format (if it is supported by an app in android)
It is advertised on various websites going from 120 Ansi Lumen up to 1000 lumens but the actual lumens are 100.
For such a small projector this is more then enough. It is visible inside during daytime (not outside in direct sunlight) but it is at it's best in low light/dark room situation.

The Playstore is fully working so almost every app can be installed. Apps that mirror your phone/laptop screen let you enjoy everything wireless with wifi on a big screen
The launcher provided is nice but provides no settings which is a shame because if i delete an app from the homescreen the picture shortcut will stay and i can't replace it with something else. (I however always can install another launcher from the playstore)
It also has no pulldown menu for notifications/quicksettings, so if i get a notification, i can hear it but i cannot open the pulldown screen
The quadcore Arm Cortex a7 with RK3128 chip makes the Android in this projector react very smooth & fast.
It has 1 gigabyte ram & 16 Gigabyte internal memory. 1 gigabyte is not that much because most apps will only install in this memory and you start with only about 500 megabyte of free storage place.

The only minus is the Hdmi connection slot.. It doesn't support Hdmi IN, only hdmi out, that means you can not connect a game console to it for playing games. The Chinese sellers didn't mention it was only hdmi out.. (who wants a hdmi out to a smaller tv screen that shuts down the projection screen once connected lol)
The Following User Says Thank You to contrinsan For This Useful Post: [ View ] Gift contrinsan Ad-Free
22nd March 2016, 08:32 AM |#2  
Junior Member
Thanks Meter: 0
Hello Man,

I thinking about other using of this, so i would like install to device IFTTT (if this then that) app. It's can be working? I would like to using this device for wakeup alarm video (ie. a short movie from internal memory).
3rd May 2016, 06:58 AM |#3  
Junior Member
Thanks Meter: 3
Bricked mine - help
I saw there was an update available and downloaded it. Got an error on install and now it's stuck on the recovery system screen. None of the options get it out of the loop. Know anyplace where there's a factory image?

Ed Flaherty
Syracuse, NY
[email protected]
5th May 2016, 03:05 AM |#4  
Junior Member
Thanks Meter: 3
Got hold of the vendor thru Amazon. Downloaded the image file and installer program (713mb). Went smoothly thru a male to male USB cable. Now have the latest upgrade. htc_d002_box_en_noota_20160317-3.img
14th May 2016, 04:26 AM |#5  
Junior Member
Thanks Meter: 0
Where you find this vendor? My projector after update not working and now in recovery mode too
14th May 2016, 12:17 PM |#6  
Junior Member
Thanks Meter: 3
The vendor was hard to contact directly. Amazon intercepts communications and edits out email addresses, even when you try to disguise them.

Eventually, they did get an email to me directly and included the installer zip file and the instruction doc file. And a link to where they had put the .img file.

The return email address I got was [email protected]

14th May 2016, 01:22 PM |#7  
Junior Member
Thanks Meter: 0
Thank you very much for helping, now I repairing my projector and everything is working
15th May 2016, 12:01 PM |#8  
Junior Member
Thanks Meter: 1
Hello, can you tell me if it has keystone correction?
15th May 2016, 12:50 PM |#9  
Junior Member
Thanks Meter: 3
No, it doesn't. Only focus.
23rd May 2016, 07:14 AM |#10  
Junior Member
Thanks Meter: 0
Is it possibile to switch off the LED (and fan) from API or other way? (like standby mode in a smartphone. Processes are running, ie. alarm clock,etc.). Thx.
23rd May 2016, 12:49 PM |#11  
Junior Member
Thanks Meter: 3
I don't know. I'm not a programmer.
Post Reply Subscribe to Thread

m6+, pocket dlp projector

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes