Unfortunately no it would not work as the 8.4 started using the more secure update system from late v16.
Sent from my CLT-L09 using Tapatalk
uConnect 6.5 (Alfa / Fiat) Root Access
- Thread starter SquithyX
- Start date
Sent from my CLT-L09 using Tapatalk
TMC & Speedcams for Germany in Custom Europe Map?
Hello,
are in the Custon Europe map Q3/2018 speedcams for germany an is tmc working for germany?
Thanks for your help
Best regards
Daniel
Hello,
are in the Custon Europe map Q3/2018 speedcams for germany an is tmc working for germany?
Thanks for your help
Best regards
Daniel
Hello,
Unfortunately the speedcams don't work for any country currently. I am still working on it.
As for TMC, it should work as I currently does, and I may be able to offer further enhancement to it, but would require your assistance with that.
Sent from my CLT-L09 using Tapatalk
OK, what are these improvements, how can I help?
I updated today to 17.07.55. Now the maps Europe Q3 2018 are being installed.
I could not test TMC yet. The file for speed cameras, however, is missing for Germany. (There is a .txt file in the German map, but not in the European map)
Thank you
The help will initially be for TMC, I have many different TMC files that can be used to improve service.
In the UK the TMC never worked as Alfa did not pay for the license. It now works.
Italian TMC now uses the premium service, I would like to look at enabling similar service for Germany.
Sent from my CLT-L09 using Tapatalk
OK, then lets ty it. Where I can find your files, and how will I get it on my Giulietta uConnect?
I maked some splash screen for the uconnect.
I hope you like them.
For use it copy the folder content with the "Alfa pre UDP iso" on the usb key.
https://mega.nz/#F!gx8HRAIB!hEfAhrKyxT4lBeAh4Awldw
View attachment 4695348
I hope you like them.
For use it copy the folder content with the "Alfa pre UDP iso" on the usb key.
https://mega.nz/#F!gx8HRAIB!hEfAhrKyxT4lBeAh4Awldw
View attachment 4695348
I've found an "iGo License viewer" on another forum:
It seems that this is alicence problem.
The original Giulietta licenses have: "Speedcams" and "ASR" the license files 2018_Q3 from MEGA don't have these.
Robert
Attachments
Last edited:
Hahaha, yea have had that app for some time. The TomTom version of the maps has speedcams as well but they don't work. You been on GPS power?
Sent from my CLT-L09 using Tapatalk
Gentlemen, any of you have version 6.5 / RA3 -NA 15.43.00? I want to update it to the EU, I want to change the frequency of radio and language. Unfortunately, SquithyX was not able to help me, maybe someone else will find a solution? I can pay for the service.
Thank you for any hints
Thank you for any hints
Gentlemen, any of you have version 6.5 / RA3 -NA 15.43.00? I want to update it to the EU, I want to change the frequency of radio and language. Unfortunately, SquithyX was not able to help me, maybe someone else will find a solution? I can pay for the service.
Thank you for any hints
I'm still testing the procedure.
I do not have much time to devote to this project now.
I hope as soon as possible to publish a guide. However, it is based on the idea of SquithyX: overwrite some configuration files that identify the model and nationality
What file did you use to backup from 15.43?Gentlemen, any of you have version 6.5 / RA3 -NA 15.43.00? I want to update it to the EU, I want to change the frequency of radio and language. Unfortunately, SquithyX was not able to help me, maybe someone else will find a solution? I can pay for the service.
Thank you for any hints
Last edited:
"1 Magic - Fiat pre UPD (15.18.00).zip" + "2 BACKUP -NA or ROW to EU Convert.zip" it works
Hi. Do you add EU map to device? This method work to replace NA to EU map?Gentlemen, any of you have version 6.5 / RA3 -NA 15.43.00? I want to update it to the EU, I want to change the frequency of radio and language. Unfortunately, SquithyX was not able to help me, maybe someone else will find a solution? I can pay for the service.
Thank you for any hints
Hay,
There is a "dirty" hack to change some parts (if it will work on your uConnect)
Changing the FM Frequency is *possibly* quite simple. I have the tuner config files and can see the different ranges (not different by much!) between EU, NA, SA, ROW and China, the simple answer would be to overwrite the NA,SA,ROW... ranges with the EU ones, and Flashing EUv2 map pack would give you EU navigation.......The only bit that is currently difficult to change is the Languages.
@wildcook If i remember correctly the reason we could not properly convert your uConnect using the FRAM files was not having correct write access to the lower file system.
I have successfully converted other peoples uConnects from NA to EU and EU to NA, through manipulation of the FRAM files. Though they were all running newer versions of software.
I will modify the 15.43.00 image for you to try, as i had not realized the version of your software was newer than the modified file you were using. Then we can see if it will allow R/W access to the file system.
There is a "dirty" hack to change some parts (if it will work on your uConnect)
Changing the FM Frequency is *possibly* quite simple. I have the tuner config files and can see the different ranges (not different by much!) between EU, NA, SA, ROW and China, the simple answer would be to overwrite the NA,SA,ROW... ranges with the EU ones, and Flashing EUv2 map pack would give you EU navigation.......The only bit that is currently difficult to change is the Languages.
@wildcook If i remember correctly the reason we could not properly convert your uConnect using the FRAM files was not having correct write access to the lower file system.
I have successfully converted other peoples uConnects from NA to EU and EU to NA, through manipulation of the FRAM files. Though they were all running newer versions of software.
I will modify the 15.43.00 image for you to try, as i had not realized the version of your software was newer than the modified file you were using. Then we can see if it will allow R/W access to the file system.
I did everything according to the instructions.
fs:
https://mega.nz/#F!2XJAiIwB!ZASxwtFrc5YBLwM4l-5nQA
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
Quick update. It worked however, had to try it twice. I did the update while I had to travel for a couple of hours. 1st time message no key availablie. After that put the stick in the car again, drove off. When it was stopped blinking, stopped at a gasstaion. Then ignition off, out the car, took the stick out, filled my tank with gas, locked the car, when inside to pay, back in the car and VOILA, it worked -
19I thought i would start this thread, separate to the Jeep one as the Jeep thread is for the 8.4" uConnect and uses some different files to the 6.5" version.
The aim of the thread is to be able to gain some sort of 'root' access to the file system to be able to update the maps on the system. So far I know cm0002 and Leighm0 have done some great work with the 8.4" - Most of which we can use on the 6.5".....once we have access to the file system.
The problem we seem to be facing is finding a swdl.iso that is old enough to be modified for our 6.5" units.
Mission Accomplished.... mostly
Disclaimer: I can not be held responsible for any damages to your uConnect, Car or your hair falling out from running this modification.
That being said, if you do have a problem please contact me and I will see if I can help you fix it.
For all those people still on v17.07.46 or older uConnect 6.5 firmware I offer you a “jailbreak”, you can now update your maps to the latest versions (currently offering EU 2018Q3 / NA 2018Q1 in my pack). I have to warn you though, the process can take a lot of time!
For those of you who have updated your 6.5 uConnect to v17.35.41 or v18, I am still working on how to update those, FCA / Alfa changed the locks with that update!
For a Full EU / NA update, if you follow my instructions fully, it will take approx. 4hours during which time your uConnect must remain powered on. This time can be greatly reduced by only updating the country or countries you need, or if you are feeling brave, skipping Step 1.
Files / Items needed:
uConnect 6.5 running v17 or older firmware -Supporting Alfa, Fiat and Jeeps too!
At least 8gb USB Drive ***preferably with a flashing led light so you can see file access***
Files from
https://mega.nz/#F!kURhTCbJ!uJhKPMyGiESbvQSDb33CvQ
Stage 1 – Backup your files
Download:
1 Magic -Alfa pre UPD.zip -For Alfa
1 Magic -Fiat & Jeep pre UPD.zip -For Fiat / Jeep
2 Backup.zip
Process:
1. Download and expand “1 Magic -XXX.zip” and “2 Backup.zip”
2. Copy the content onto the root of the USB drive
3. Start car and let uConnect boot up (wait approx 5min for full boot up)
4. Plug in and WAIT, the uConnect will not appear to be doing anything but if you are using a USB with a light you should be able to see it flashing with file activity
5. After some time, in my case it took 1h25 to complete this stage, it should popup a window about there is a update that you MUST answer NO to
6. Pull USB, and power cycle the uConnect*
After that you now have a backup of all the system and map files we are going to change on your uConnect.
KEEP THEM SAFE!
Either use a second USB for stage 2, save the backup folder to your computer or if your like me and use a 16gb USB stick you can leave it where it is.
I have now uploaded copies of the official EU Map Packs from (A) 2013, 2015 and 2017, NA Map Packs (B) 2013, and ROW Map Packs (C) WIP that will function as a backup or official upgrade for anybody needing them, restoring your uConnect back to stock.
***If you have a newer set of Original Map files please contact me, and I can add them to the drive for all to benefit from***
Stage 2 – Modify your uConnect
Download:
1 Magic.zip --You should already have this if you completed Stage 1
D EU Custom 2018 HNEU2018Q3v2.zip --Full EU
E NA Custom 2018 HNNA2018Q1.zip --Full North America
Or
D UK Custom 2018 HNUK2018Q3.zip --UK Only
D FR Custom 2018 HNFR2018Q3.zip --France Only
D DE Custom 2018 HNDE2018Q3.zip --Germany Only
D IT Custom 2018 HNIT2018Q3.zip --Italy Only
***There will be other country / State only update packs soon***
Or
A EU 2013 Original NQEU2012Q4.zip --Stock 2013 Maps, Original EU Release
A EU Update 2017 HMEU2015Q4.zip --Newest Original Map files released 2017
B NA 2013 Original NQNA2013Q4.zip --Stock 2013 Maps, Original NA Release
Process:
1. Download and expand “1 Magic.zip” and “D XX Custom 2018 HN….zip”
2. Copy the content onto the root of the USB drive
3. Start car and let uConnect boot up (wait approx. 5min for full boot up)
4. Plug in and WAIT, the uConnect will not appear to be doing anything but if you are using a USB with a light you should be able to see it flashing with file activity
5. After some time, depending on file used - If country / State only pack approx. 15min if full EU then approx. 2h, it should popup a window about there is a update that you MUST answer NO
6. Pull USB, and power cycle the uConnect*
If all gone well you will now have a uConnect 6.5 with updated maps!
As I am sure you can understand, there are still some little bugs to work out;
Problems:
UK postcodes > Only 5 digit search
Speedcams > Not working at all
Anything else… you tell me
Fixed:
UK TMC now working
France TMC working again
Italy TMC (paid version) working
There may be other little problems, but I am unable to test them, please let me know and I will look into them and try to fix!
*To Power cycle:
Either remove key, lock car, wait 10min, unlock and restart)
Or use engineers menu to reset the uConnect (Press Radio, More and Browse until menu pops up, scroll down to Reset Radio, answer YES)7I have uploaded some of the files, more to come.
The URL:
https://mega.nz/#F!kMYjlSKB!MCC6U1jclb0_aHc-NdocrA
If you have anything else to share please message me.5So close, but broken lol
Success......kind of, I have managed to modify a swdl.iso to enable loading of different / modified files, on my Alfa 6.5 uConnect running 17.07.55.
The problem now is I seem to have completely broken navigation!!!!!!
I used the idea from post #216 in the Rooted Jeep Cherokee thread and modified the manifest.lua file in the swdl.iso (17.07.55) to load a script from usb before running the update.
Process goes power on uConnect > wait for it to boot up and display "Hands free ...." > insert USB and wait...it seems like its not doing anything but the script is running in the background > after some time the do you want to update question and answer No.
The fact that is has asked if you want to update is confirmation that the script has finished, however unfortunately there is no indication that the script is being run or how long it will take unless you have a usb with a flashing light, then it will show you something is happening at least! **my usb does not have a flashing light
I tested it with a splash screen update.... that worked perfectly, so no more boring Alfa Romeo logo on silver background for me at start up, I then pushed the modified NaviServer2, nav.sh and navRestart.sh files and rebooted.... new splash screen working perfectly but on pressing Nav button I just end up on a screen saying "Activating Navigation"
I am in the process of uploading the modified files to the mega share if anybody whats to have a look or are feeling brave5
I have used a modified 17.07.55 swdl.iso with a script.lua - if you download the test above it contains some of the modified files. The rest are currently being uploaded / are already available online.
I have done a very quick video of progress with the uConnect here:
https://youtu.be/ed0O-xXNHdg
