for software version 17.35.41 there is a solution to update maps ? (naviserver9.10.32.697995) ?
thanks
You need to use the fiat and jeep pre UPD file. Make a backup and I will be uploading a convert from US to EU pack soon!
Sent from my CLT-L09 using Tapatalk
I just can't. I've tried many times.
- first unzip .zip from swdl.iso, directly on usb, then unpack the script.lus + backup folder. When I plug into the car and see "authentication failed" and the usb stops working.
I thought I might have something damaged but the update from the Uconn... web works: RA3_15_43_0_NAFTA_MY14_MY16_330_BF
Would you be able to share that update image for me to have a look at, and hopefully modify it for you?
@RefLeks
Check the drive, there is a modified version of your file on the drive. Download "1 Magic - Fiat pre UPD.zip" and please feedback.
Wow, You are a genius! Good job
I connected usb and the usb is working. To backup I use "2 BACKUP -NA or ROW to EU Convert" correctly?I made a backup, it takes about 2.9 gb, nothing has changed in uconnect. Should I go to stage 2- maps ? I will have Polish menu and EU radio frequency when stage 2 ends? Should I put the entire backup on network disk? Maybe you will want to see something from this data?
For Polish maps I must used all EU? "A EU Update 2017 HMEU2015Q4.zip"?
I no longer have the option to report speed cameras. Do you have these options?
Sorry, yea No speedcams yet.... Not sure why the ones included don't work and my updated ones have problems with licenses. I am working on it!
I feel its better to have current maps and no speedcams instead of Maps and speedcam warnings from 2012.
Sent from my CLT-L09 using Tapatalk
I totally agree. It would be good but not a priority. And what about TMC ? Any chance to see it working in Italy?
I totally agree. It would be good but not a priority. And what about TMC ? Any chance to see it working in Italy?
Sorry, yea No speedcams yet.... Not sure why the ones included don't work and my updated ones have problems with licenses. I am working on it!
I feel its better to have current maps and no speedcams instead of Maps and speedcam warnings from 2012.
Sent from my CLT-L09 using Tapatalk
Could I get some feedback about the TMC. As far as I was aware the TMC system worked in most of Europe as it is provided for as a free service. It never worked in the UK as the TMC service in the UK is a paid service and FCA did not buy a license for it.
If this is this not the case, please let me know. I have many TMC files from getting UK to work, and can start trying to get Italy and rest of Europe to work - though will need your help to test!
listen me. tmc in italy is divide by 2 company. the free one, where there is no need of anything and the paid one, where you need to put the license file into TMC folder and activating it by alfaobd the feature "TMC Pro".
here attached some tic license if you wanna try.
Ok, so does the uConnect use the free one in Italy currently?
I will look at the TMC files you have sent - it looks very similar to a pack i already have but without the license files lol.
Not sure if it will need to be activated through AlfaOBD as, TMC is accessed from NaviServer2 that has been modified.
Quick update. It worked however, had to try it twice. I did the update while I had to travel for a couple of hours. 1st time message no key availablie. After that put the stick in the car again, drove off. When it was stopped blinking, stopped at a gasstaion. Then ignition off, out the car, took the stick out, filled my tank with gas, locked the car, when inside to pay, back in the car and VOILA, it workedI just applied it in my car :
Put the magic iso at the root
Copy only the full folder you point with the arrow at the root (not the mac)
It looks to me 50mins around... No proposal of updates
Hint : Wait a few minutes after the led stop blinking before to apply the procedure of reboot remove USB key , turn ignition OFF then Open and Close the Driver’s door. Make sure to leave ignition off, do not press the brake, and do not reopen any doors, and wait 60 seconds.
Turn ignition back ON then OFF, Open and Close the Driver’s door and wait 60 seconds.
You can now exit the vehicle, process is complete.