And when I try to upload the combination firmware J610FXXU1ARI3, I have the message on my phone :
SW REV CHECK FAIL : (aboot) Fused 3 > Binary 1
And when I try to upload the combination firmware J610FNXXU2ASF1, I have the message on my phone :
SW REV CHECK FAIL : (aboot) Fused 3 > Binary 2
And as I said before when I'm flashing J610FNXXU3ASG1, I have the message on my phone :
"Custom Binary(vendor) Blocked By FRP Lock"
So what to do now please ?
Your images link to this page.
As I mentioned previously you are now at rev 3 due to flashing the rev 3 combination firmware.
The only one that will flash is J610FNXXU3ASG1.
You need to remove vendor from the AP tar package.
You can do this with 7zip. Unpack, remove, repack.
I'm so sorry Ashyx, I have uploaded my image, but I didn't know it was showing anything . . .
Here are the pictures uploaded again :
https://ibb.co/kQ1FDBn = Pre_download mode
https://ibb.co/f43B5Zw = Download mode before flashing
https://ibb.co/LP2mfcf = Download mode after flashing
https://ibb.co/XScjY0Z = Odin fail with U3ASG1 1/2
https://ibb.co/JCQP1q0 = Odin fail with U3ASG1 2/2
https://ibb.co/xYwhHWv = Odin fail again with U3ASG1
https://ibb.co/sPgd8tR = Odin fail with original samsung Firmware
|Thread Tools||Search this Thread|