Samsung Galaxy J6+ (SM-J610FN/DS) - Help me to FRP Off

Search This thread

iddik

Senior Member
Oct 27, 2019
52
0
Hello all,

Could you please help me to FRP off, on my Samsung Galaxy J6+ (SM-J610FN/DS) ?

I have tried differents combination firmware to flash but it didn't success :
1/ COMBINATION_FAC_FA81_J610FNXXU2ASF1_FACFAC_REV00_u ser_mid_noship_MULTI_CERT_FirmwareX.tar
2/ COMBINATION_FAC_FA81_J610FXXU1ARI3_FACFAC_CL143111 90_QB19755774_REV00_user_mid_noship_MULTI_CERT.tar .md5
3/ COMBINATION_FAC_FA81_J610FNXXU3ASG1_FACFAC_REV00_u ser_mid_noship_MULTI_CERT_FirmwareX.tar

I also tried to flash the kernel and I have had many issues after, and my phone has the battery drained and I didn't know what to do with that phone, it was rebooting in loop . . .
I also had some fails during the ROM flashing with Odin.

Now I'm charging the battery

And I want to start from the begining to :
- put the phone developper mode with USB debugging option
- FRP Off
- and finally put the latest original samsung firmware
 
Last edited:

iddik

Senior Member
Oct 27, 2019
52
0
Could somebody help me to know which combination firmware I need for my phone :

Samsung Galaxy J6+ (SM-J610FN/DS) , it is a French phone
 

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,055
9,947
This thread is a continuation from below, so as not to confuse others.
https://xdaforums.com/galaxy-j6+/development/kernel-patched-boot-image-samsung-t3863400/page6



Ok so, your device is running rev 3 firmware, so not sure why your recovery is revision 1 J610FNXXU1ASB3?

Seeing as your not able to tell me which firmware you were previously running, I'm going to assume Oreo judging from the recovery build.

Now, as your device is currently binary 3 the only combination firmware that is going to flash is J610FNXXU3ASG1.

However I need to know at which point it fails, so a screenshot from Odin would be helpful.
 
Last edited:

iddik

Senior Member
Oct 27, 2019
52
0
This thread is a continuation from below, so as not to confuse others.
https://xdaforums.com/galaxy-j6+/development/kernel-patched-boot-image-samsung-t3863400/page6



Ok so, your device is running rev 3 firmware, so not sure why your recovery is revision 1 J610FNXXU1ASB3?

Seeing as your not able to tell me which firmware you were previously running, I'm going to assume Oreo judging from the recovery build.

Now, as your device is currently binary 3 the only combination firmware that is going to flash is J610FNXXU3ASG1.

However I need to know at which point it fails, so a screenshot from Odin would be helpful.


Here are two screenshots of the Odin Fail during the flashing combination firmaware : 3/ COMBINATION_FAC_FA81_J610FNXXU3ASG1_FACFAC_REV00_u ser_mid_noship_MULTI_CERT_FirmwareX.tar

https://www.photobox.co.uk/my/photo/full?photo_id=502296070816
https://www.photobox.co.uk/my/photo/full?photo_id=502296064167

But I guess it was my battery drained, that's because I'm charging it. It's 1h of charging now
 

iddik

Senior Member
Oct 27, 2019
52
0
Here are two screenshots of the Odin Fail during the flashing combination firmaware : 3/ COMBINATION_FAC_FA81_J610FNXXU3ASG1_FACFAC_REV00_u ser_mid_noship_MULTI_CERT_FirmwareX.tar

https://www.photobox.co.uk/my/photo/full?photo_id=502296070816
https://www.photobox.co.uk/my/photo/full?photo_id=502296064167

But I guess it was my battery drained, that's because I'm charging it. It's 1h of charging now


At the begining before flashing any ROM, in the recovery mode I had : J610FNXXU1ASB3

For now I guess it's : J610FNXXU3ASG1
 

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,055
9,947
Here are two screenshots of the Odin Fail during the flashing combination firmaware : 3/ COMBINATION_FAC_FA81_J610FNXXU3ASG1_FACFAC_REV00_u ser_mid_noship_MULTI_CERT_FirmwareX.tar

https://www.photobox.co.uk/my/photo/full?photo_id=502296070816
https://www.photobox.co.uk/my/photo/full?photo_id=502296064167

But I guess it was my battery drained, that's because I'm charging it. It's 1h of charging now
Not sure what you're linking to there, 50% off everything? :confused:
 

iddik

Senior Member
Oct 27, 2019
52
0
This thread is a continuation from below, so as not to confuse others.
https://xdaforums.com/galaxy-j6+/development/kernel-patched-boot-image-samsung-t3863400/page6



Ok so, your device is running rev 3 firmware, so not sure why your recovery is revision 1 J610FNXXU1ASB3?

Seeing as your not able to tell me which firmware you were previously running, I'm going to assume Oreo judging from the recovery build.

Now, as your device is currently binary 3 the only combination firmware that is going to flash is J610FNXXU3ASG1.

However I need to know at which point it fails, so a screenshot from Odin would be helpful.



I have charge the battery for 1 or 2 hours
And I have tried to flash again the combination file J610FNXXU3ASG1

Here are the screeshots that I have :

https://www.photobox.co.uk/my/photo/full?photo_id=502296147509 = Before flashing
https://www.photobox.co.uk/my/photo/full?photo_id=502296149497 = Before flashing Download mode
https://www.photobox.co.uk/my/photo/full?photo_id=502296151088 = After flashing Download mode
https://www.photobox.co.uk/my/photo/full?photo_id=502296151821 = After flashing Odin
 

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,055
9,947
I have charge the battery for 1 or 2 hours
And I have tried to flash again the combination file J610FNXXU3ASG1

Here are the screeshots that I have :

https://www.photobox.co.uk/my/photo/full?photo_id=502296147509 = Before flashing
https://www.photobox.co.uk/my/photo/full?photo_id=502296149497 = Before flashing Download mode
https://www.photobox.co.uk/my/photo/full?photo_id=502296151088 = After flashing Download mode
https://www.photobox.co.uk/my/photo/full?photo_id=502296151821 = After flashing Odin
50% off everything. :eek:
 

iddik

Senior Member
Oct 27, 2019
52
0
Now when I'm flashing the combination firmware J610FNXXU3ASG1, I have a fail in Odin like before and on my phone it is written in RED color :

"Custom Binary(vendor) Blocked By FRP Lock"

Please advise :crying:


And when I try to upload the combination firmware J610FXXU1ARI3, I have the message on my phone :
SW REV CHECK FAIL : (aboot) Fused 3 > Binary 1

And when I try to upload the combination firmware J610FNXXU2ASF1, I have the message on my phone :
SW REV CHECK FAIL : (aboot) Fused 3 > Binary 2

And as I said before when I'm flashing J610FNXXU3ASG1, I have the message on my phone :
"Custom Binary(vendor) Blocked By FRP Lock"

So what to do now please ?
 

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,055
9,947
And when I try to upload the combination firmware J610FXXU1ARI3, I have the message on my phone :
SW REV CHECK FAIL : (aboot) Fused 3 > Binary 1

And when I try to upload the combination firmware J610FNXXU2ASF1, I have the message on my phone :
SW REV CHECK FAIL : (aboot) Fused 3 > Binary 2

And as I said before when I'm flashing J610FNXXU3ASG1, I have the message on my phone :
"Custom Binary(vendor) Blocked By FRP Lock"

So what to do now please ?
Your images link to this page.
https://www.photobox.co.uk/

As I mentioned previously you are now at rev 3 due to flashing the rev 3 combination firmware.
The only one that will flash is J610FNXXU3ASG1.

You need to remove vendor from the AP tar package.
You can do this with 7zip. Unpack, remove, repack.
 

iddik

Senior Member
Oct 27, 2019
52
0
Your images link to this page.
https://www.photobox.co.uk/

As I mentioned previously you are now at rev 3 due to flashing the rev 3 combination firmware.
The only one that will flash is J610FNXXU3ASG1.

You need to remove vendor from the AP tar package.
You can do this with 7zip. Unpack, remove, repack.


I'm so sorry Ashyx, I have uploaded my image, but I didn't know it was showing nothing. . . :(

Here are the pictures uploaded again :

https://ibb.co/kQ1FDBn = Pre_download mode
https://ibb.co/f43B5Zw = Download mode before flashing
https://ibb.co/LP2mfcf = Download mode after flashing
https://ibb.co/XScjY0Z = Odin fail with U3ASG1 1/2
https://ibb.co/JCQP1q0 = Odin fail with U3ASG1 2/2
https://ibb.co/xYwhHWv = Odin fail again with U3ASG1
https://ibb.co/sPgd8tR = Odin fail with original samsung Firmware
 
Last edited:

iddik

Senior Member
Oct 27, 2019
52
0
Is there another combination firmware available that we need ?
Why this combination firmware is not flashing correctly like I could 10 days before ?

I have charge the battery of my phone Samsung Galaxy J6+ all night long
I don't know if it was not flashing because of the battery drained . . .
 
Last edited:

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,055
9,947
I'm so sorry Ashyx, I have uploaded my image, but I didn't know it was showing anything . . . :(

Here are the pictures uploaded again :

https://ibb.co/kQ1FDBn = Pre_download mode
https://ibb.co/f43B5Zw = Download mode before flashing
https://ibb.co/LP2mfcf = Download mode after flashing
https://ibb.co/XScjY0Z = Odin fail with U3ASG1 1/2
https://ibb.co/JCQP1q0 = Odin fail with U3ASG1 2/2
https://ibb.co/xYwhHWv = Odin fail again with U3ASG1
https://ibb.co/sPgd8tR = Odin fail with original samsung Firmware
Yes I can see the images now. As said in my previous post remove vendor.img.ext4.
You may also need to remove system.img.ext, but try it with first.
 

iddik

Senior Member
Oct 27, 2019
52
0
Yes I can see the images now. As said in my previous post remove vendor.img.ext4.
You may also need to remove system.img.ext, but try it with first.

Ashyx,

I have tried as you advised to remove the "vendor" or the "system" .img from the combination firmware J610FNXXU3ASG1 but Odin crashed at the very begining of the flashing process because Odin check the package at the step : "Files Analysis" . . . .
 
Last edited:

iddik

Senior Member
Oct 27, 2019
52
0
It is a mystery for me . . . . only thing I can tell is that now after booting the phone with that speciale combination firmware I can see that my battery life have 34% on energy !

I have done the same flashing ROM combination firmware and yesterday it wasn't working.

Actually now I'm quite happy

What is the next step to get FRP off ?