FORUMS
Remove All Ads from XDA

[Android 4.0+, ROOT] AppRadio Unchained Reloaded

2,366 posts
Thanks Meter: 957
 
By Area51©, Senior Member on 28th November 2014, 02:23 PM
Post Reply Email Thread
2nd December 2014, 09:46 PM |#21  
Senior Member
Roseburg
Thanks Meter: 166
 
More
Thank you!
 
 
6th December 2014, 02:11 PM |#22  
Junior Member
Flag Moscow
Thanks Meter: 0
 
More
Hello,

I'm testing ARUR with SPH-DA120 and Ugoos U007B stick Android 4.4. ARUR is installed as system application. It starts on boot and connects to HU ok but does not receive touch events correct. When I calibrate the touch screen, the first red point is detected correct others aren't. If I press on the red point, touch is not detected, if I press anywhere outside red point, touch is detected and ARUR shows next calibration point. In result no touch events in Android.

When I tested ARU for sticks (arunchained0.15stick.apk), touch events transferred properly.
6th December 2014, 05:37 PM |#23  
Senior Member
Flag Norwich
Thanks Meter: 194
 
More
Quote:
Originally Posted by stargate125645

Are you sure that's all that is required for converting to a system priv-app? Last time I did it, a library file needed to be transferred as well.

That is why I said to use Root Browser rather than ES File Explorer or Titanium. You select what looks like the APK file and move it, then set the permissions. Job done nice and simply.

It does in fact move the whole folder so all of the files get moved in one clean action.

So yes I'm sure that was all that I had to do. Otherwise it wouldn't have worked
6th December 2014, 06:44 PM |#24  
Area51©'s Avatar
OP Senior Member
Flag Breda
Thanks Meter: 957
 
Donate to Me
More
Quote:
Originally Posted by NK2014

Hello,

I'm testing ARUR with SPH-DA120 and Ugoos U007B stick Android 4.4. ARUR is installed as system application. It starts on boot and connects to HU ok but does not receive touch events correct. When I calibrate the touch screen, the first red point is detected correct others aren't. If I press on the red point, touch is not detected, if I press anywhere outside red point, touch is detected and ARUR shows next calibration point. In result no touch events in Android.

When I tested ARU for sticks (arunchained0.15stick.apk), touch events transferred properly.

You need to enable 'Invert XY-coordinates' in the options and then reconnect to activate it.
6th December 2014, 08:26 PM |#25  
Junior Member
Flag Moscow
Thanks Meter: 0
 
More
Quote:
Originally Posted by Area51©

You need to enable 'Invert XY-coordinates' in the options and then reconnect to activate it.

Thanks, that helps.

New issues:
1. I don't get GPS locations. ARUR's GPS menu shows zeroes. Mock location enabled globally. I tried "Do not switch Mock ..." options off and on, reconnected, nothing changes.
2. Sensitivity of touches on bottom edge of the screen is very low. Bottom edge means the area bellow bottom calibration points.
3. Stability of reconnects of AppRadio after reboots and cold starts is low compared to arunchained0.15stick.apk, especially when Hands Free Bluetooth profile is disabled on the stick. "Workaround for wrong channel ..." option was tested with no result.
7th December 2014, 05:11 AM |#26  
Senior Member
Flag Omaha, NE
Thanks Meter: 67
 
More
Quote:
Originally Posted by 400ixl

That is why I said to use Root Browser rather than ES File Explorer or Titanium. You select what looks like the APK file and move it, then set the permissions. Job done nice and simply.

It does in fact move the whole folder so all of the files get moved in one clean action.

So yes I'm sure that was all that I had to do. Otherwise it wouldn't have worked

The library file was in a separate folder, so that doesn't actually answer the question. It must have been an alpha thing. You can move folders with ES, too. The permissions thing also should be updated in your post still if you want it to function as an FAQ, I think.
7th December 2014, 07:02 AM |#27  
Account currently disabled
Thanks Meter: 40
 
More
Quote:
Originally Posted by ddash97

I see no Chromecast warnings. The only warnings I do see are from the Pioneer AppRadio itself. Also, I have to use an app called "#MirrorEnabler" in order to get the "Cast screen" option in the Chromecast app as the OnePlus is not an officially supported device.

As far as the audio is concerned, I would say the quality is equal to bluetooth 2.0. I listen to sport talk about 95% of the time i'm in my car so its not enough to out weigh all the other benefits. you can stop here or...

you can read this if you want a bit more information about my opinion with regards to audio quality...

i have factory speakers with an external amp & sub connected to the appradio. Also, my vehicle is performance oriented so my cabin noise is above average. With all that said, there is still a discernible difference in the below scenarios and I would rate the "cast screen" audio as on par with bluetooth 2.0

#audio and video compression over wifi with phone as the source
appradio + chromecast cast screen + oneplus = good

#audio and/or video compression over wifi with chromecast as the source
appradio + individual app casting (ie Netflix, Play Music) = better

#potentially no compression depending on the source
appradio + directly connected media (ie dvd, cd,usb,hdmi) = best

Now, replace the appradio with my home theater system in the above scenarios and I would rate all three higher.

I'm experiencing completely unusable bluetooth audio while using the Samsung allsharecast with the one plus one...

Drop outs and skipping is horrendous....

Sent from my A0001 using Tapatalk
7th December 2014, 09:08 AM |#28  
Senior Member
Flag Norwich
Thanks Meter: 194
 
More
Quote:
Originally Posted by stargate125645

The library file was in a separate folder, so that doesn't actually answer the question. It must have been an alpha thing. You can move folders with ES, too. The permissions thing also should be updated in your post still if you want it to function as an FAQ, I think.

That was all I had to do. Didn't have to move anything else.
7th December 2014, 10:17 AM |#29  
Junior Member
Flag Moscow
Thanks Meter: 0
 
More
Quote:
Originally Posted by NK2014

2. Sensitivity of touches on bottom edge of the screen is very low. Bottom edge means the area bellow bottom calibration points.

I hide the bottom Android bar with buttons and recalibrated the screen. Bottom calibration points were shown on the bottom of the screen and calibration process was ok but still no reliable touches on the bottom.

Quote:
Originally Posted by NK2014

3. Stability of reconnects of AppRadio after reboots and cold starts is low compared to arunchained0.15stick.apk, especially when Hands Free Bluetooth profile is disabled on the stick. "Workaround for wrong channel ..." option was tested with no result.

By now it seems not critical...
7th December 2014, 11:06 AM |#30  
Junior Member
Thanks Meter: 0
 
More
GREAT BUT please need your help.........
Great with my SG S5 with 8650BT .... but the screen not full screen ... there are black margin in the Head unit ... i want it to be full screen normally please ....
and please if there are a way to remove this left Vertical column ...

waiting for your replay please
7th December 2014, 11:25 AM |#31  
smoki3's Avatar
Senior Member
Flag Heidenheim
Thanks Meter: 1,248
 
Donate to Me
More
can you add a Option to force enable Bluetooth on Start up?
On my mk809iii sometimes Bluetooth turns off after reboot.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes