Remove All Ads from XDA
H10 Turbo

Replacement touch screen not working

2 posts
Thanks Meter: 0
By amkleist, Junior Member on 17th March 2017, 12:45 PM
Post Reply Email Thread

I've bought a new screen + digitizer and replaced it with my broken screen. At first it didn't work...but after updating my N5 device with a OTA cable and a mouse i worked for about a day. But this morning it was unresponsive again.

I've opened it up and checked that every ribbon cable is correctly installed.

The screen turns on fine, but the touch screen is unresponsive.

Any one who has a fix for this or know what to do?
18th March 2017, 06:30 AM |#2  
audit13's Avatar
Recognized Contributor
Flag Toronto
Thanks Meter: 4,909
Sounds like a hardware problem to me.
18th March 2017, 06:36 PM |#3  
redj12's Avatar
Senior Member
Thanks Meter: 227
Your previous screen is completely dead ? If the previous screen worked try to put it back and see if it's ok. Maybe you damaged the flex cable or something. The nexus's connectors are really bad...
25th March 2017, 06:41 PM |#4  
Thanks Meter: 3
I've a very similar situation here. Where did you get the screen? Mine seems to work fro a couple minutes then it's unresponsive.
26th March 2017, 03:57 PM |#5  
audit13's Avatar
Recognized Contributor
Flag Toronto
Thanks Meter: 4,909
I think the screen is defective. I have replaced the screens on 6 or 7 nexus 5 phones with 3rd party frame/LCD/glass units from Aliexpress and they all continue to work after several months of use.
13th October 2017, 04:16 AM |#6  
JackyGundam's Avatar
Junior Member
Thanks Meter: 1
i have this question also. i can use my touch screen at the first time but not after reboot . Display works very fine to my new screen with digitizer.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes