[Guide] Root Honor V10 on stock fireware without erasing data

[Night5talker]

Hi, I just got my V10 (BLK-L09 build number C432)

I have on my screen
PHONE Locked
FRP Lock

$ fastboot flash ramdisk boot-b132-root3.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (13048 KB)...
OKAY [ 0.363s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.369s

I need full process how to root it, need to have access to titanum backup

 

[piphol]

Hi, I just got my V10 (BLK-L09 build number C432)

I have on my screen
PHONE Locked
FRP Lock



I need full process how to root it, need to have access to titanum backup

Unlock bootloader first before replacing the boot image. After that, follow the first post. Google it and it should lead you to the Huawei unlock bootloader page. If I'm not mistaken, your Huawei ID should be logged in to the phone for at least 14 days before they give you the unlock code. Not sure if that restriction has already been lifted.

 

[borisku]

If I'm not mistaken, your Huawei ID should be logged in to the phone for at least 14 days before they give you the unlock code. Not sure if that restriction has already been lifted.

I got it 2 days ago on the huawei page where you unlock your device as a response to my question to unlock it...(see pic)

 

[Night5talker]

I got it 2 days ago on the huawei page where you unlock your device as a response to my question to unlock it...(see pic)

is there any way to remove that power message?
"your device has been unlocked and can't be trusted"


PS confirm this ROOT process is working on BLK-L09-8.0.0.120(C432)

 

[borisku]

For ZTE Axon 7 there was found a way to eleminate this (similar) message... For me it doesnt matter, it shouldnt make someone afraid who knows what this means...

 

[evs-ru]

So, is there any way to flash Magisk instead SuperSU?

 

[mahesh2040]

I got it 2 days ago on the huawei page where you unlock your device as a response to my question to unlock it...(see pic)

Unlocking void warranty????

 

[borisku]

@evs-ru i dont think so at the moment aus the prerootet boot img contains supersu as i know, i think one has to make a prerootet boot img with magisk for your wish... @mahesh2040 I cant say... one should read a long text, but i didnt... but i think you will leave warranty: That would be logic ... i havent root my honor yet, but i will do in the next time...

 

[Nimueh]

So, is there any way to flash Magisk instead SuperSU?

Ok, so I don't have the V10 (just looking at what's out there for it and considering if I should get it) ... but can't you just install the Magisk Manager and then it does the flashing and boot.img repacking? I mean that's how it works on my LG G5 and on my Android TV Box, I can't imagine it being any different here

 

[evs-ru]

Ok, so I don't have the V10 (just looking at what's out there for it and considering if I should get it) ... but can't you just install the Magisk Manager and then it does the flashing and boot.img repacking? I mean that's how it works on my LG G5 and on my Android TV Box, I can't imagine it being any different here

I need the original boot.img first.. But update.app doesn't contains it..

 

[Nimueh]

I need the original boot.img first.. But update.app doesn't contains it..

So I might be completely off track here and in that case I apologize in advance ... but when I put Magisk on my BeeLink TV box I didn't need any kind of boot.img either, Magisk extracted that from the running system.

I went into SuperSu and selected the cleanup to switch superuser apps. 1st time it just got stuck on the "please wait" screen, so I restarted the box, clicked on it again and this time it was done within seconds and SuperSU was gone.

Then I rebooted, installed the Magisk Manager app, let it download the file it needed and clicked on the automatic install. I then saw it back up the boot.img, patch it and reported success. I let it reboot and that was it, the box was running Magisk.

On my G5 I didn't need any img either, Magisk just backed up the existing one before patching it.

Is the V10 really so much different? Have you tried it at all?

 

[BlueMan_86]

What when we get to boot loop. am on BKL-L09, i need instruction how to get my phone back to work
I finished that... BUT I dont have Remote APK on phone, lol.. If someone have to give me...

 

[Night5talker]

just lost my root privileges due OTA update, will this still work if I do it again or I need new file to run?

 

[Night5talker]

Since TWRP is still not ported to V10, so i decided to make a prerooted-boot.img.

Download Link

You can flash this boot.img to root your Honor V10 AL20C00 (6GB+128GB China Edition) on stock firmware (B132)
Usage:
0. Unlock bootloader and close find my phone.
1. Power off your phone
2. Plug your phone to computer
3. Hold power and volume down until boot into fastboot mode
4. flash this boot.img by adb ( fastboot flash ramdisk boot-root-b122.img), please download adb by yourself
5. reboot (fastboot reboot)

Your phone may reboot twice, and you'll get root access.

Declaim:
I only test this on my own phone (BKL-AL20C00), Use this on your own risk. I'm not responsible for your phone's damage.
using this tool means you accept this.

Thanks:
HRT-Lin
@mankindtw for his Mate-10 root boot.img
cofface for his bootimg.exe to unpack and repack boot.img
@worstenbrood for his Huawei Update Extractor

Will this work after OTA?

 

[KrimsonHart]

Hey guys, couldn't find a proper thread to post this on, so thought i'd do it here as it is somewhat related to rooting and bootloader unlock. If you find this to be in the wrong place, please instruct me.

My problem - As we all know, Huawei has stopped providing bootloader unlock codes to their new devices. I had raised a bootloader unlock code request right before that, captured a screenshot and saved it to my google drive storage. Unfortunately now, I am unable to find it anywhere (neither on my laptop nor in the drive/photos). Is there a way to recover this code by logging in to their site/any other place/contact to recover this? I have tried looking for it in all possible locations and have been unable to find it. If someone can help me unlock my bootloader, I will be very grateful. Thank you in advance.

 

[GroaningFalcon307]

Since TWRP is still not ported to V10, so i decided to make a prerooted-boot.img.

Download Link

You can flash this boot.img to root your Honor V10 AL20C00 (6GB+128GB China Edition) on stock firmware (B132)
Usage:
0. Unlock bootloader and close find my phone.
1. Power off your phone
2. Plug your phone to computer
3. Hold power and volume down until boot into fastboot mode
4. flash this boot.img by adb ( fastboot flash ramdisk boot-root-b122.img), please download adb by yourself
5. reboot (fastboot reboot)

Your phone may reboot twice, and you'll get root access.

Declaim:
I only test this on my own phone (BKL-AL20C00), Use this on your own risk. I'm not responsible for your phone's damage.
using this tool means you accept this.

Thanks:
HRT-Lin
@mankindtw for his Mate-10 root boot.img
cofface for his bootimg.exe to unpack and repack boot.img
@worstenbrood for his Huawei Update Extractor

Does This rom work on Honor Play? I want to know casue there are no developments for Honor play as the bootloader key is not provided by honor though there is an unofficial way to unlock the bootloader.
One of the Junior Members in the Honor play thread suggested to try Roms of Honor v10..so I wanted to know if this rom or any other Rom of this device would work for honor play?