[email protected] ~/Builds/HoX $ adb shell ~ # mount -a && mount|grep xtra /dev/block/mmcblk0p15 on /xtradata type ext4 (rw,relatime,user_xattr,barrier=1,data=ordered)
~ # umount -a umount: can't umount /tmp: Device or resource busy umount: can't umount /tmp: Device or resource busy umount: can't umount /dev/pts: Device or resource busy umount: can't umount /dev: Device or resource busy
~ # mke2fs -t ext4 -m 0 /dev/block/mmcblk0p14 mke2fs 1.42.9 (28-Dec-2013) Discarding device blocks: done Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1654784 inodes, 6619136 blocks 0 blocks (0.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 202 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done
~ # mke2fs -t ext4 -m 0 /dev/block/mmcblk0p15 mke2fs 1.42.9 (28-Dec-2013) Discarding device blocks: done Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 140544 inodes, 562176 blocks 0 blocks (0.00%) reserved for the super user First data block=0 Maximum filesystem blocks=578813952 18 block groups 32768 blocks per group, 32768 fragments per group 7808 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done
~ # exit ~ $ adb reboot bootloader ~ $ fastboot flash boot boot.img
New Storage Layout for HOX Endeavoru
This New Layout will change the way your phones internal memory partitions are used.
The primary goal is to get more space for your apps and data. The secondary goal is to be more compatible with new OS/software. This is obtained by using a layout similar to Nexus devices.
Two years ago pabx showed us "How to switch to a big /data partition", but at that time very few of us actually needed it. It was experimental and good Linux skills was required.
Almost one year ago Thömy proposed to use a new better storage layout for our device. We tried it and found it good (at least I did), but we were still happy with KitKat on Dalvik, so we didn't bother to publish it.
Well, now we have Lollipop and ART. And memory suddently seem very limited.
Move2SD is a must for many of us. And guess what...: Thömy refined the layout to be used for Android 5 and ... I have the pleasure to present this New Layout. So, here we go.
Before starting the process of converting your HOX to the New Layout, please make sure you have plenty of time for this.
Don't start if you are planning to use the phone in near future. Unforseen things can happen, so you may need some advice to get back on the right track.
It is very hard to brick the HOX as HTC did a good job on securing it, but we all know, s... happens.
Remember, xda is all about changes and no change is without risk.
A word of warning: Although some error situations will be prevented, it was not possible to cover all situations.
You CAN restore a backup from the wrong layout. And you may be able to loose data if you don't keep track of which layout you are using.
It is YOUR responsability to keep track of your files. Good luck and have fun flashing.
Enough talking, let's start.
Requirements: HTC One X International. 50%+ battery. You know how to flash a recovery. You know how to flash ROM and boot.img.
To upgrade, follow these simple steps or use the detailed guides below:
Make sure your adb/fastboot is up to date and working.
Make sure you can transfer files with MTP (test before you start the transformation).
Going back to the old layout is easy:
Whats missing ? Let me know if you find something!
Want pictures ? Look in the guides
Want more ? Upload it....
... and so he did... thanks @dady000 for SlimBean!
Adding New Layout to Legendary @pabx AOSP 4.2.2 >>>>>>DOWNLOAD<<<<<
All my files are now copied/moved to >>>>> Android File Host
Hi,here is the ViperX 4.1.1 for new layout made by me.
Actually I didn't do anything special,just followed the instruction posted by teemo,so do not consider it my job
Hope you enjoy it
1-Flash kernel from this post,ignore the one inside the rom.
2-I forgot to include extra keyboards added in latest viperX,if you need any,extract it from original ViperX zip (old layout) and copy your missing keyboard to system/app and reboot.don't forget to change permision before
Boot to fastboot and Install a recovery made for the New Layout. twrp2811.BiG.img will do for a start.
|Thread Tools||Search this Thread|