[OFFICIAL][NOUGAT]DOToS v-1.2[05/11/17][WEEKLY]

Status
Not open for further replies.
Search This thread
By:
Advanced…
miju12

miju12

Senior Member
Aug 14, 2014
823
1,689
31
New Delhi
Lenovo ZUK Z2 (Plus)
Xiaomi Redmi Note 7 Pro
29705874


" #DroidOnTime "


disclaimer.png


Code: 
[SIZE="4"] 
/*
 *
 * Your warranty is now void.
 * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. 
 * You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
 *
 */[/SIZE]

"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."

about.png


dotOS is an Android Rom which focuses on performance and stability. Our aim is to enable a user to extract as much juice as possible and get most out of his/her device.
Initially started by Mohan CM and later joined by Ganesh, Sam, Kuber, Iacob and Hari. Together we stand strong.

features.png



Stability and Performance
Lagfree with High Performance Results
Clutterless UI
Perfect Interface for every User
Enhanced default apps
Redesigned settings and QS panel
Full OMS support
Colour Engine Support

DotExtras !!

STATUSBAR

* Clock Customisation
* Battery Customisation


Quick Settings

* Quick Pulldown
* QS Tiles Customisation
* Advanced Quick Setting Easy Toggles


Buttons

* Volume Key Cursor Control


Display

* Wake on Plug
* Pocket Detection
* Accidental Touch


Lockscreen

* Fingerprint Tweaks
* Powermenu Tweaks
* Double tap 2 sleep anywhere
* Lockscreen Media Customisation
* Blur Screen Lockscreen


Recents

* Clear all Button
* Immersive Recents
* Show Memory Bar


Navigation Bar

* On screen navigation Bar tweaks
* Home Button tweaks
* Menu Button tweaks
* Back Button tweaks
* Power Button tweaks
* Volume Buttons tweaks


Misc

* Advanced Reboot
* Disable Force Close
* ScreenShot Tweaks
* Camera Shutter Sound


instructions.png


CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot

DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
root solution do not state something else (="persistence on dirty flashing") !

downloads.png


Download ROM:
DotOS ROM

Download Gapps:
Note : Pico or Nano Gapps are recommended. We Don't prefer STOCK/HEAVY Gapps
OpenGApps

​
credits.png




dotOS team
52px-Lineage_OS_Logo.png
LineageOS team
ResurrectionRemix team
AospExtended
crDroid team
AICP team
And all other open source Devs/Teams.

​

theteam.png



Mohan CM - dotOS Founder/Lead Dev./Contributor
Ganesh Varma - Lead Dev./Contributor/Maintainer
Kuber Sharma - Contributor/Designer/Analyst
Sam Grande - Contributor/Designer/Maintainer
Iacob Ionut - Contributor/Designer/Maintainer
Hari Ambadi - Contributor/Core GFX/ Lead Designer

github.png


dotOS source


Device Specific Sources
Official Device specific sources:
https://github.com/dotOS-Devices

Unofficial Device specific sources:
....

Reference Links

g+.png

Google Plus Community

Website




Liked The ROm? Want to Help Us? Then gift us some credits

REPORTING BUGS!
As soon as the problem occurs, take a logcat!
READ MORE
What is a LogCat?
A "LogCat" is for debugging applications / Android system. When applications / Android crash the output the "explanation" for the crash, the Exception Stacktrace, to a Log. This log can be saved and help developers to fix the crash.
What is it supposed to do?
It will help to solve your questions, if your asked for a LogCat it is always useful.
How can I get a LogCat?
Prerequisites:
Code: 
Linux, Windows or Mac 
USB cable for your device 
Android Device
Instructions:
Code: 
Install your device driver for using adb. Everything you need will you find here
Download adb executable for your OS (Download: Windows | Linux | Mac). Paste it somewhere.
Connect your android device.
Verify if "Settings > Developer options > USB debugging" is checked, if not, simply check it.
Open a command prompt (windows) or terminal (linux / mac). How to do it: On Windows: windows + r > enter "cmd" (without quotes) > click enter | On Linux: You don't know how to open a terminal? LOL | On Mac: Type Terminal into Spotlight and open it
CD to the directory where the adb executable is located. On Windows: Go to the directory where you downloaded the adb executable, Shift+Right Click and select "Open Console" (or similar) | On Linux / Mac: Rightclick in the directory and select "Open Terminal here" (or simply CD into the directory)
Type in your cmd/terminal: adb devices to verify your device is properly connected.
If your device is properly selected, type in adb logcat to show the mighty and magic logcat aka stacktrace.
Reproduce your error (or whatever) on your device.
Right after, paste the whole cmd / terminal window into a paste-service like [url]http://pastebin.com/[/url] and send it to us.


ATD.png

​

XDA:DevDB Information
dotOS, ROM for the z2_plus

Contributors
@miju12
Source Code: https://github.com/dotOS-Devices/android_kernel_zuk_msm8996
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.18.x
Based On: LineageOS

Version Information
Status: Stable
Current Stable Version: v1.2
Stable Release Date: 2017-11-05

Created 2017-11-05
Last Updated 2017-12-26
 
Last edited:
  • Like
Reactions: aaki_rocker, bensgomez, K001droid and 24 others
A

ashwath230

Senior Member
Sep 30, 2015
281
34
26
Tumkur
Screenshots please @miju12 can you provide us the complete working features on the device and bugs too
Is every bug of other ROMs fixed in this? Just curious to know
 
Last edited:
  • Like
Reactions: Chadlinje
D

devabhi

Guest
FC:'s everywhere @miju12 I mentioned earlier but you guys didn't paid attention, this happened with me one month ago also when I compiled dot os test build , just as an advice get your builds tested before posting
 
D

Deleted member 6693922

Guest
devabhi said:
FC:'s everywhere @miju12 I mentioned earlier but you guys didn't paid attention, this happened with me one month ago also when I compiled dot os test build , just as an advice get your builds tested before posting
Click to expand...
Click to collapse
He will fix that. He is busy right now


GUYS DONT DOWNLOAD BUILD IT ISNT STABLE IT WAS A MISTAKE
 
Status
Not open for further replies.

Similar threads

D
[ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]
Replies
14K
Views
1M
S
shubhuu123
optimumpro
  • Poll
[ROM][U/B] JAGUAR Z2 PLUS NOUGAT OFFICIAL ENCRYPTABLE Volte confirmed working
Replies
6K
Views
452K
slxls
slxls
F
  • Locked
[ROM] [ z2_plus ] AICP 13.1 | Oreo 8.1.0 | OFFICIAL | Treble | WEEKLY
Replies
2K
Views
255K
S
sanjay.2704
optimumpro
  • Poll
[ROM] JAGUAR OREO REBASED 8.1 OFFICIAL-STABLE - NON-TREBLE- updated JANUARY 10
Replies
10K
Views
554K
B
Bhaumikm_
D
[ROM] [7.1.2] [OFFICIAL][VoLTE] AEX 4.6
Replies
4K
Views
488K
Mattia46old
Mattia46old

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 27
    miju12
    miju12
    29705874


    " #DroidOnTime "


    disclaimer.png


    Code: 
    [SIZE="4"] 
/*
 *
 * Your warranty is now void.
 * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. 
 * You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
 *
 */[/SIZE]

    "This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."

    about.png


    dotOS is an Android Rom which focuses on performance and stability. Our aim is to enable a user to extract as much juice as possible and get most out of his/her device.
    Initially started by Mohan CM and later joined by Ganesh, Sam, Kuber, Iacob and Hari. Together we stand strong.

    features.png



    Stability and Performance
    Lagfree with High Performance Results
    Clutterless UI
    Perfect Interface for every User
    Enhanced default apps
    Redesigned settings and QS panel
    Full OMS support
    Colour Engine Support

    DotExtras !!

    STATUSBAR

    * Clock Customisation
    * Battery Customisation


    Quick Settings

    * Quick Pulldown
    * QS Tiles Customisation
    * Advanced Quick Setting Easy Toggles


    Buttons

    * Volume Key Cursor Control


    Display

    * Wake on Plug
    * Pocket Detection
    * Accidental Touch


    Lockscreen

    * Fingerprint Tweaks
    * Powermenu Tweaks
    * Double tap 2 sleep anywhere
    * Lockscreen Media Customisation
    * Blur Screen Lockscreen


    Recents

    * Clear all Button
    * Immersive Recents
    * Show Memory Bar


    Navigation Bar

    * On screen navigation Bar tweaks
    * Home Button tweaks
    * Menu Button tweaks
    * Back Button tweaks
    * Power Button tweaks
    * Volume Buttons tweaks


    Misc

    * Advanced Reboot
    * Disable Force Close
    * ScreenShot Tweaks
    * Camera Shutter Sound


    instructions.png


    CLEAN FLASH :
    Download the latest build and GApps
    Reboot to recovery
    Make NAndroid backup (Not Necessary)
    Wipe System, Data, Cache , Dalvik
    Flash the latest build and GApps
    Reboot

    DIRTY FLASH :
    Download the latest build
    Reboot to recovery
    Flash the latest build
    Wipe Cache
    Reboot
    The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
    The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
    root solution do not state something else (="persistence on dirty flashing") !

    downloads.png


    Download ROM:
    DotOS ROM

    Download Gapps:
    Note : Pico or Nano Gapps are recommended. We Don't prefer STOCK/HEAVY Gapps
    OpenGApps

    ​
    credits.png




    dotOS team
    52px-Lineage_OS_Logo.png
    LineageOS team
    ResurrectionRemix team
    AospExtended
    crDroid team
    AICP team
    And all other open source Devs/Teams.

    ​

    theteam.png



    Mohan CM - dotOS Founder/Lead Dev./Contributor
    Ganesh Varma - Lead Dev./Contributor/Maintainer
    Kuber Sharma - Contributor/Designer/Analyst
    Sam Grande - Contributor/Designer/Maintainer
    Iacob Ionut - Contributor/Designer/Maintainer
    Hari Ambadi - Contributor/Core GFX/ Lead Designer

    github.png


    dotOS source


    Device Specific Sources
    Official Device specific sources:
    https://github.com/dotOS-Devices

    Unofficial Device specific sources:
    ....

    Reference Links

    g+.png

    Google Plus Community

    Website




    Liked The ROm? Want to Help Us? Then gift us some credits

    REPORTING BUGS!
    As soon as the problem occurs, take a logcat!
    READ MORE
    What is a LogCat?
    A "LogCat" is for debugging applications / Android system. When applications / Android crash the output the "explanation" for the crash, the Exception Stacktrace, to a Log. This log can be saved and help developers to fix the crash.
    What is it supposed to do?
    It will help to solve your questions, if your asked for a LogCat it is always useful.
    How can I get a LogCat?
    Prerequisites:
    Code: 
    Linux, Windows or Mac 
USB cable for your device 
Android Device
    Instructions:
    Code: 
    Install your device driver for using adb. Everything you need will you find here
Download adb executable for your OS (Download: Windows | Linux | Mac). Paste it somewhere.
Connect your android device.
Verify if "Settings > Developer options > USB debugging" is checked, if not, simply check it.
Open a command prompt (windows) or terminal (linux / mac). How to do it: On Windows: windows + r > enter "cmd" (without quotes) > click enter | On Linux: You don't know how to open a terminal? LOL | On Mac: Type Terminal into Spotlight and open it
CD to the directory where the adb executable is located. On Windows: Go to the directory where you downloaded the adb executable, Shift+Right Click and select "Open Console" (or similar) | On Linux / Mac: Rightclick in the directory and select "Open Terminal here" (or simply CD into the directory)
Type in your cmd/terminal: adb devices to verify your device is properly connected.
If your device is properly selected, type in adb logcat to show the mighty and magic logcat aka stacktrace.
Reproduce your error (or whatever) on your device.
Right after, paste the whole cmd / terminal window into a paste-service like [url]http://pastebin.com/[/url] and send it to us.


    ATD.png

    ​

    XDA:DevDB Information
    dotOS, ROM for the z2_plus

    Contributors
    @miju12
    Source Code: https://github.com/dotOS-Devices/android_kernel_zuk_msm8996
    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.18.x
    Based On: LineageOS

    Version Information
    Status: Stable
    Current Stable Version: v1.2
    Stable Release Date: 2017-11-05

    Created 2017-11-05
    Last Updated 2017-12-26
    View
    21
    K001droid
    K001droid
    IQSOCH9.jpg


    Final Nougat will come don't worry about that,
    We are working on Oreo, Z2 will get it - dotOS 2.1 that is.
    In my opinion Z2 has one of the best and stable trees, it'll be a good one!

    Just for teasers see Screenshots attached.

    Note : The Screenshots attached are of dotOS based on 8.1 which is currently W.I.P. We are constantly working on it, things can be changed and improved further in the future. We had some issues in Nougat but i hope Oreo will be a beast!

    No ETA Plox!

    With regards
    Kubersharma
    dotOS Team
    View
    20
    K001droid
    K001droid
    dotOS 2.1 | 8.1 | BETA

    Initial Beta Build | Stable for Daily Use.

    Downloads-

    ROM- https://www.androidfilehost.com/?fid=818070582850498386


    Changelog-
    -March Security Patches
    -DUI
    -Advanced Power Menu
    -App Opps
    -Smart Pulldown
    -Nav Bar double tap to sleep
    -Status Bar Brightness control
    -Lockscreen Tuner
    -Nav Bar tuner
    -Secure Lock Screen(no power menu)
    -Toast Icon
    -Brightness Icon toggle
    -Brightness Slider toggle
    -Network Traffic
    -Status Bar Icons
    -Battery Styles
    -Clear All button - On/Off
    -QS PANEL Column & Row selector
    and many of other features, tweaks etc.

    If you want some suggestion or feedback about the ROM : t.me/dotos
    Stay up to date with all the information about dotos : t.me/dotoschannel

    Bugs-
    VoLTE is broken after few reboots as reported by a guy. (Share logs please)
    ---> You tell me if any!

    Report bugs and feedbacks to : @kubersharma or @miju12

    Credits and Thanks-
    dotOS Team
    Zuk-devs (Davidevinavil, DD3Boh, Cosmedd etc)
    Miju12
    Vivek


    Device:
    https://github.com/dotOS-Devices/android_device_zuk_z2_plus
    Kernel:
    https://github.com/dotOS-Devices/android_kernel_zuk_msm8996
    Vendor:
    https://github.com/dotOS-Devices/proprietary_vendor_zuk_z2_plus

    Note : I am from dotOS Team and this build is for devices owned by Internal Team only. So, Z2_plus is the first get it :D

    ---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------

    Reason I am not opening a thread is that, I won't maintain it, someone else will. Or I'll co - maintain it as I am a busy man :p
    Enjoy
    View
    20
    miju12
    miju12
    Rom will be updated soon. DoT OS team is adding features and improving designs etc, in shorts the rom sources is in maintenance. After that I will test it and make sure that there are no bugs left. So sit tight and wait for the release and please stop asking where the build is. Whenever build will be updated, i will post here. Thanks
    View
    12
    miju12
    miju12
    See you all in Dot-OS oreo thread.
    View

New posts