I built TWRP [Ver: 3.1.1] from scratch for M250X (X=i,N etc.)
ONLY FOR TESTERS NOW!
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired. Please * do some research if you have any concerns about features included in this Recovery * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
LG M250X (X=i,N etc.)
First, unlock your bootloader using this guide and access to fastboot is needed!
(1) Download the recovery image.
(2) Download Flashify.
(3) Flash Recovery using Flashify.
You are in TWRP!
NOTE: To boot into recovery with hardware buttons use this method. Power off the device > press and hold Power + Volume Down buttons simultaneously > keep pressing them until the LG logo shows up > when the LG logo shows up, let go of the buttons for 1 second and then press them again. A factory reset menu will show up. Select "Yes" two times to "wipe" your device. Don't worry, this will actually NOT wipe your device. It will boot into recovery normally. This is because LG phones are a bit different and they instruct the recovery (TWRP in this case) to automatically perform a factory reset of the phone by triggering the /misc wipe flag. I mapped /misc partition to a different partition (/pad) so TWRP doesn't perform a factory reset.
Mentioned in 3rd post.
[UNOFFICIAL][RECOVERY][M250X] TWRP 3.1.1 , Tool/Utility for the LG K10
Source Code: https://github.com/PVineeth/android_..._mlv5_recovery
Last Updated 2018-12-17