FORUMS
Remove All Ads from XDA

[Recovery[[Root] TWRP 3.2.1-0 For LG K20 Plus (TP260 & MP260)

976 posts
Thanks Meter: 722
 
By Travisholt92, Senior Member on 31st December 2017, 04:42 AM
Post Reply Email Thread

Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION:
Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED

Quote:

How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]

-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/dow...y=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:
Quote:

1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS or T-Mobile splash screen but don’t worry this is expected.


Downloads :
https://drive.google.com/file/d/10Gy...w?usp=drivesdk
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
The Following 15 Users Say Thank You to Travisholt92 For This Useful Post: [ View ] Gift Travisholt92 Ad-Free
 
 
31st December 2017, 04:43 AM |#2  
Travisholt92's Avatar
OP Senior Member
Flag Fort Wayne, Indiana
Thanks Meter: 722
 
Donate to Me
More
RESERVED
31st December 2017, 11:28 AM |#3  
Senior Member
Flag CORPUS CHRISTI
Thanks Meter: 33
 
Donate to Me
More
Quote:
Originally Posted by Travisholt92


Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION:
Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED


-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/dow...y=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:



Downloads :
https://drive.google.com/file/d/10Gy...w?usp=drivesdk
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

The download link is set to private need permission to dl.
31st December 2017, 01:15 PM |#4  
Travisholt92's Avatar
OP Senior Member
Flag Fort Wayne, Indiana
Thanks Meter: 722
 
Donate to Me
More
Quote:
Originally Posted by kalel420

The download link is set to private need permission to dl.

It should be good to go now. I thought I had turned link sharing on. Apparently not.
The Following User Says Thank You to Travisholt92 For This Useful Post: [ View ] Gift Travisholt92 Ad-Free
12th January 2018, 02:52 AM |#5  
Junior Member
Thanks Meter: 0
 
More
I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does
12th January 2018, 04:03 AM |#6  
Travisholt92's Avatar
OP Senior Member
Flag Fort Wayne, Indiana
Thanks Meter: 722
 
Donate to Me
More
Quote:
Originally Posted by quickslay15

I keep getting stuck. When i wipe with twrp and reboot to recovery and enable mtp it doesnt show up on my computer. I went to devies and printers to try to update usb composite device but the usb composite device doesnt show up under hardware. Only the adb device does

Do you have the lg drivers installed? It works for me on both Ubuntu and Windows 10
17th February 2018, 07:46 AM |#7  
Travisholt92's Avatar
OP Senior Member
Flag Fort Wayne, Indiana
Thanks Meter: 722
 
Donate to Me
More
There is a 64bit TWRP available on the link in the OP. If your phone won't charge with 64bit TWRP, please stick with 32bit software until the issue is resolved. I have very little information on this, it happens on some TP260 and MP260 devices. Also Double tap to wake also doesn't work for some on 64 bit. There appear to have been multiple display models used in this device. It's not clear what other parts could be different and if that could be a factor. Hopefully we can resolve this issue soon. But I'm fairly clueless at this point. I tried updating my kernel to 10w and adding just dt2w and 64bit commits with no luck.
3rd March 2018, 07:05 PM |#8  
Junior Member
Thanks Meter: 0
 
More
Looking to install a multiple rom manager..Spent hours going in circles. Tried Rom Manager but it doesn't seem to work right. Ideas?
6th April 2018, 08:56 PM |#9  
Travisholt92's Avatar
OP Senior Member
Flag Fort Wayne, Indiana
Thanks Meter: 722
 
Donate to Me
More
64bit charging now works for all. Thank @messi2050 for the charging fix.
The Following 5 Users Say Thank You to Travisholt92 For This Useful Post: [ View ] Gift Travisholt92 Ad-Free
25th April 2018, 05:02 AM |#10  
Junior Member
Thanks Meter: 1
 
More
twrp
Quote:
Originally Posted by Travisholt92


Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION:
Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED


-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/dow...y=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:



Downloads :
https://drive.google.com/file/d/10Gy...w?usp=drivesdk
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.

---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------

Quote:
Originally Posted by Deydacar3

Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.

I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!
25th April 2018, 06:45 AM |#11  
Travisholt92's Avatar
OP Senior Member
Flag Fort Wayne, Indiana
Thanks Meter: 722
 
Donate to Me
More
Quote:
Originally Posted by Deydacar3

Hey, guys, hi. I'm having trouble getting into twrp. When I give it volume down + power release power and enter factory reset, I give it YES and then YES again, it restarts and the lock bootloader window appears. It doesn't go into twrp, I'm stuck there.

---------- Post added at 05:02 AM ---------- Previous post was at 04:13 AM ----------



I apologize, I was able to go into recovery and do the rest of the steps. A thousand thanks to the creator of this tutorial!

Good to hear that you managed to get it working
Post Reply Subscribe to Thread

Tags
lg-k20-plus

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes