Recent content by c0ded

IIRC, you can only downgrade to a version that is either the same or newer than the bootloader you are currently running. So, get back into download mode and try to flash NK4.

Hello, all! By running 'ls -al /dev/block/platform/msm_sdcc.1/by-name', I was able to get the partition table for the S4, which can be found here. This is probably a very nooby question, but if I extract the MDK bootloader files from the firmware file (.tar.md5), could I dd them to their...

Hello, all, I'm currently on ME7. Would flashing this file through ODIN brick my phone? Or do I need to update to MK2 first? Thanks in advance!

First off, what is your problem? Also, whatever you do, DO NOT SELECT "WIPE DATA" OR YOU WILL BRICK!!!

DO NOT FLASH THE JB VERSION!!!!! Flash the TWRP version that ends with "-4.2", NOT "-JB" or you will brick!

After using Ubuntu Touch for a little while, I decided to revert back to Android. I wiped the cache and dalvik cache, then began restoring (according to this guide). While doing that, TWRP hanged in the middle of restoring the system partition. Any idea what to do?

Thanks :)!!!

Every time I check the wifi tab in Ubuntu Touch, it shows empty, even though I have a broadcasting wifi router active. Could I be doing something wrong?

That should work (follow this guide here), but you can't relock the firmware yet.

While trying to unlock my TF300T with the 4.2 bootloader, a question popped up that I didn't have the answer to. I did some researching and found nothing. Any idea what to do?

There isn't a v8.2 on the Asus support website. Where did you get your unlock apk?

One other solution is to unplug the battery for 30 minutes, then plug it back in.

Do you flash the version of twrp designed for the one you're downgrading from or the one you're downgrading to?

Thanks :)!

Power up your tablet while holding down the Vol- button, then wait until a menu appears on your tablet. Within 10 seconds, hit the Vol- button. On your computer, run "fastboot devices". If it finds your tablet, then download the correct recovery...