Recent content by drstoms

  1. D

    Post Collection of 8227l firmware (android vers:6-9)

    How did you see the 8227L with flashtool? I connect the A-A cable, turn on the power and zero reaction in the device manager
  2. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    I have the same problem that it does not detect px5. I have a jig made by myself as in the first post and I also have a px3 board and normally the jig detects it in the loader and when the external pins are in the maskrom but in px5 no reaction at all. Do you have any idea? because you have...
  3. D

    Post allwinner t8 octa core android 9

    Hi, did you find the firmware for this model? or did you manage to flash this software from the forum? How do you link to. Please download it
  4. D

    Post allwinner t8 octa core android 9

    ahmed68 hello I have the same unit as a colleague called Eunavi. Are you saying that the software from this forum is not for this unit? after all, it's allwinner t8 p1 a7, these systems will not fit? after all, just after uploading the files to the flash drive, the unit does not even detect...
  5. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    I tried the rkbarch tool tools with the restore option, flash, factory tool tools, android tool release v2.59 which always works for me, but unfortunately not on this board. So try to format the tile in maskrom mode first?
  6. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    ok, that is, to try in the Android tool in maskrom mode the erase flash option will only help to recover the loader mode right? because I tried it and it is also boot fail
  7. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    Can I ask you for help again? because I see you are very clever and you certainly know the solution. I have one more Px3 board to be repaired. I connected Jig but this board does not respond at all and should show up in loader mode. After the pins are shorted and connected, the Jig enters...
  8. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    Where do you know how to search under what name and where can you buy such a ready jig cable? alone. I constructed the same, but probably the factory jig, would be better, connect faster and last longer
  9. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    Try to shorten these pins with a system identical to my Px3. These pins should be the CPU clock and grounding
  10. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    I shortened the cable even more and now it works as it should 😀 Topic solved. A lot really means a lot to me now this cable can flash any rom under rk3188 😀😀😀
  11. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    Thanks Marchnz for all the help. I was finally successful 🙂🙂🙂Flash software finally went after manual driver change. The unit got up 🙂 Just a strange thing. USB otg stopped reading PenDrive, you can no longer use the Pc keyboard for recovery because usb does not work. In the system, the...
  12. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    Using Android developer tool 2.59 all options try can boot to maskRom, see in maskrom mode but flash no sucess, erase flash, restore, dev partition, flash loader for rk3188 version 2 and up every flash fail, device fail
  13. D

    Post [PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable

    I shortened the usb cable significantly and it detected it in loader mode, while during flash the device faild error or what is in the photo pops up. I checked on Android Tool, rkbatch tool. Option Restore, upgrade. Again, no luck, unfortunately