Recent content by mcduck1

  1. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Amazing what late nights can do. Managed to get my system back up and running, although it there was some mistakes done resulting in the reset button now beeing gone, same with built in microphone. No biggie. Touch controlls dont work either (i removed the pcb too), but everything else seems to...
  2. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Hi again all. Seems my unit has suffered some damage, possibly due to water ingression on the front touch buttons. At first the unit stopped working, then it would randomly boot up from time to time. I took it apart and together again, after baking at 50c for a while (24h). After this the unit...
  3. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    https://www.dropbox.com/sh/8vx6fcyfve6s33z/AACmbmI95ud2JPIQapsfuoPKa?dl=0 This appears to be android 10, for PX6 STM32. Any idea if this i safe to flash on our devices? Perhaps something to build upon?
  4. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Hello. Any chance there will be an android 10 update to this? I see more and more vendors selling real Android 10 based on the same hardware as our devices. All the best Mcduck
  5. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Been trying a few different approaches, but I can not seem to get it working just yet. I tried the swupdate and it applies it, reboots and same thing happens. I wish we could have a good touch screen recovery for this device :) i'm trying to install some older firmwares now to see if I can get...
  6. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    No worries, I will look at this more this weekend. I can certainly boot from MiniSD, but i can not use any keys (only reset, and it does only that), and the display looks wrong. Not that its a huge deal, i know the recovery meny from pictures, so I should be able to use a usb keyboard to...
  7. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Thanks, I will attempt this fix in a 30 minutes and report back :)
  8. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Good morning sir :) I have a mini sd card reader, so I hope I can boot from that. Not too worried that its bricked, If i need to take it apart thats no problem, just time consuming. On my device its said also that one of the usb cables accessable from outside supports OTG, but not 100% sure...
  9. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Do we know a way to reboot into recovery without system access? I installed the full version v2.0, camera version and it refuses to boot. Just boot to car logo, and stays there indefinitly. tried to hold reset many times for many different seconds (1,5,10,20,30 etc). Nothing seems to get it to...
  10. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    I dont have a screenshot, i forgot my sd card on the way to work :D But yes, the notification area is still dark, with dark text just as in original firmware. I'm sure this will be fixed very soon by either this roms author or by a hotfix by someone else. It just amazes me that the original...
  11. mcduck1

    Post [ROM][PX6][STM32][9.0] Malaysk ROM for PX6 MCU STM32 RK3399 with Android 9

    Hello I flashed the full rom, no dsp today. I love it! I understand its a work in progress, but I'm not going back to original firmware, sticking with Malaysk. Two issies i have is, rear camera works very poorly, looks like perhaps not enough gain. changing input modes just yields "no input"...
  12. mcduck1

    Post [ROM][PX6][Pie][9.0] Malaysk ROM for PX6 RK3399 with only Android 9

    I have this radio: https://www.aliexpress.com/item/33048923975.html?spm=a2g0s.9042311.0.0.78d44c4dzrzfNC MCU shows as: STM32-20190622-11-KC6-26 (STM32... shoot me please). Firmware: 1.1.4.3.1.20190622-11-KC6-26 Android version: 9 There is no build number in "about", so im unable to activate...
  13. mcduck1

    Post (Discussion) LG G3 Android 5.0 Lollipop Update

    Indeed, A6NE has been released. Covers most of northen europe (Some other nordic builds had it a few days ago)
  14. mcduck1

    Post (Discussion) LG G3 Android 5.0 Lollipop Update

    Did you click any of the links in this thread? Many of the recent links in this thread was for the raw KDZs. They would then start in the background.
  15. mcduck1

    Post (Discussion) LG G3 Android 5.0 Lollipop Update

    Doubt it, there is no branding on mine (A6NE). One can hope they spotted the battery issues and fixed those, although I seriously doubt it.