Recent content by MioCZ

No, both TWRP recovery images not boot on TA-1047 :( Even latest factory boot.img and recovery.img are not available, so no way back when you try to flash it.

Something is wrong with this rom. No OTA . Freezing and lagging. Bad idea to use it, better ask ulefone over e-mail for ROM.

Is possible to flash un-supersu package. Is somewhere in SuperSu topic. Or you can flash clean ROM / your backups (boot.img, recoovery.img, system.img). Because this i have used supersu in BINDSBIN mode and suhide. So i have hiden su, locked bootloader, working OTA and all root sensitive apps.

I used encryption in system Setup, i works, but with unknown password stored somewhere in nvdata partition. I am worry about loose root after OTA update :( and without pasword for twrp no way to get again to data partition.

Hi. Thank you for twrp. I am trying to use SuperSu with SuHide, i wipe data with this twrp to be able to install supersu in BINDSBIN mode to /data but data partition stay unencrypted to be mountable with thw twrp. How to encrypt it back with own known password keeping supersu and suhide...

If you did Format All + Download without full firmware in folder with scatter, you bricked you phone. Realy is not possible to repair this soft bric by opening phonne and doing somethink inside. Only you can try is download full ROM from needrom a flash it by spflash tools. If bootloader not...

Not so easy to do it. It will take very long time to port or build twrp :(

I have done it and lost two days by recovering it back. Full wipe in TWRP is realy not good idea, Better do full wipe in factory recovery and then flash twrp and only wipe data and cache. So even if it is not often situation, better do all backups and manual backup nvram and nvdata partitions...

If you do full wipe, you will loose IMEIs, MAC adresses etc.

That is what i am looking for too :)

Jop, usualy digitizer is dead. In some cases only flex cable broken or in wrong position in board connector. No software solution, you need disassembly device and repair.

I have enabled 5Ghz and ac support in original latest ROM v18, firmware is compatible, nvram include params to enable, but antena is only 2.4 so very poor signal. Have someone disassemly video or step by step instructions ? I would lite to try replace antena for dualband optimized one.

Already is in second post in this topic. Skip wipe step in it.

I have not used MD5 checksum, simple do not check it in twrp and instalation will go. You can check file integrity simply in PC, extraxt the zip using any archiver. If no error, file is ok. Back on topic, why in madOS missing android engineer mode and MTK engineer mode? All relevant setting...

Hmm, i have tryied BirdA SN Writer version 3.7, but phone try to boot, writer register it when i connec it powered off, shows Start searching kernel com port and handshake and nothing. Phone reboot itself twice and boot up normaly without switching to metamode :( Can be problem with root in...