Recent content by pharpe

Do the new Onn tablets have unlocked bootloaders? The previous generation Onn specs are not close to the 2017 HD 10. There isn't even a development forum for them on XDA.

Care to share what those are? I've been searching for a while and have come up empty.

Is the bootloader unlocked on the new Onn tablets?

I installed LOS 14.1 but went down to 12.1 because of the camera and some streaming apps not working. LOS 14.1 was much better in terms of usability and battery life so I'm holding out hope that those might one day get resolved. It's a shame because the HD10 2017 is the best hardware with an...

It's all in that guide I linked to . There is a soft brick option and one where you have to open the case. I would suggest reading a lot more before you start. Start with that whole unlock/root thread.

Yes you will need to downgrade to get TWRP on there but that is out of scope for this ROM thread . Here is thread has the TWRP process. https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-10-2017-suez-t3913639 Once you get that done come back here.

Is there a way to visually tell the difference between a 7th and 8th gen HD 8? I found this side by side comparison photo and the 8th gen has black buttons but I wasn't sure if that was the same of all 8th gen models.

I have the device open and the short applied but I keep getting this [email protected]:~/android/karnak/amonet$ sudo ./bootrom-step.sh [2020-04-16 22:35:44.077465] Waiting for bootrom [2020-04-16 22:35:59.692952] Found port = /dev/ttyACM0 [2020-04-16 22:35:59.694175] Handshake * * * If you have a short...

Thanks for the quick feedback. This helps a lot. I will try to give it a shot tonight and report back.

I have a brand new HD8 that is completely untouched. Only turned it on, bypassed setup, and checked firmware (6.3.1.2). Lot Code: G943. I understand that I need to brick and downgrade in order to unlock and install TWRP. I also have read the recent posts about the hardware change that makes...

I just linked you to the thread with step by step instructions to install TWRP. That is the recommended way. Read and follow it. If you are having problems after that than post a question there. This thread is about Lineage-14.1 not how to unlock and install TWRP.

First do you have a 2017 or 2019 Fire HD 10? TWRP cannot be installed on the 2019. If you have the 2017 (code name suez) then follow the instructions https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-10-2017-suez-t3913639 If you are having an issues then post...

Another update I installed the MagiskHide Props Config module and was able to get the tablet to pass safely net. I changed the profile to a Pixel C and was then able to see the Disney+ app in the Play Store and installed it from there. Unfortunately I get the same thing on both Disney and...

Update. I got the HD 10 and went ahead and installed Lineage 14.1 with the headphone and OMX fixes. I also put the latest Magisk on. My observations: Working Plex ESPN Prime Video Youtube Roblox and Minecraft Adaway All of the non streaming apps I've tried. Mostly educational kids stuff...

Is there a recommended version of Magisk that runs best in LOS14 or just install the latest?