Recent content by Phiber2000

You are running an application in the background that kills the ADB server of the AAHK2. Locate and terminate it before starting AAHK2.

RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65. 6 0.29_26.14.04.28_M_release_225512_rooted.zip

This explains a lot! Run the AAHK2 with USB-Debugging on from Android System - not fastboot. Then run the main script - not the "...fastboot" script and select '1'. Read the instructions you get from the script very carefully! I'm looking forward for your progress!

So, do that and try again. If that doesn't work (again), attach the complete output (in spoiler tags) and I'll help you personally upcoming week!

I've read that before, but as long as the bootloader has the "***UNLOCKED***" at the top - it can't work...

Relock it with "fastboot oem lock". Then give it another try!

Execute the command in fastboot mode, copy the output to a text editor, search and remove both strings. Then post the output. If you see the output, you'll understand!

The very first line at the top in hboot and all green written lines. Punctilious. Mask your Serial and IMEI before posting it. (Just curiosity: Where are you from?)

Bafteam Please post your HBoot-Status and anonymized output of fastboot getvar all.

Then I see no problems and you won't loose anything. It only flashes an other modded hboot.

The only thing is to disable BOS via the "SkipBOSDescriptorQuery" registry entry to get the fastboot mode working with new Windows versions (8.1 and higher). Switch the DHD into fastboot mode. When your Windows runs the fastboot mode driver correctly (check device manager), just run the...

In many cases (software depending) you will definitively need it In the other cases: If anything doesn't work as intended and the vol down button has a hardware defect - you have a brick. I wouldn't try it without a working button...

It's only temporary disabled. After a reboot, it's enabled as before. That's very rare. :) Just report, if something's down and you need it. I don't check it - but if requested - of course will upload them again! Right. That's doing the same. I only recommend using the µSD method to make...

I recommend using "old" µSD cards <=8GB.

Just use another µSD card. The one you're using is not compatible obviously. Format it, restore your device using that one and the correct ruu and give it another try.