• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Recent content by rudyboler

  1. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    You have to download the file that is posted on post316, format a usb in FAT32 and unzip the file and put it in that usb, change the dmcu to your screen resolution, now you put the usb in the device and start the multimedia and he will only take it and the screen will be fine.
  2. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Ok, mate, there are the files, a small manual is in Chinese, but more or less it is understood, there I leave it, sldsssss ..
  3. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Good gentlemen, thank you all for helping me, I will explain to you it already works, I will leave you some pictures, the Chinese (Seller) sent me two files dmcu.ext (screen: 13) and hct.aut (empty), format the SD card to FAT32 and I put them in, I put it in the SD slot of the device and when I...
  4. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Ok according to the compi suchar20 says to update the image first in usb formatted to FAT32, and then when it is finished reformat the USB and copy the two files .img and .ext and update the MCU, I think I got it, thanks So I will and I tell you
  5. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Ok thank you, I look at it and tell you something, thank you.
  6. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Ok, I have the last dasaita I imagine it will be to install it again by usb, and the dmcu.img but there are two files, before you disjisted three, the dmcu.ext is missing, which I imagine is mine 1280x720, then I put the three files in a usb or I go one by one.
  7. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Okay, you can give me the link of the files that I don't even know where I have them, thanks. And what do I update the MCU or how do I do it, if you can tell me? I never miss the three files
  8. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    If I did, I put the MTCE_HA3.78_1, But look at the screen, in the end I'm going to have to put it back in again or what do I do?
  9. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    If I did, I put the MTCE_HA3.78_1, But look at the screen, in the end I'm going to have to put it back in again or what do I do? I was wrong and I put it back, forgive me.
  10. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Well gentlemen, this is going little by little, I have almost the screen, but it is not all right, then when I hit the touch if I move to the right goes to the left, I mean the other way around, and so on, I imagine that I will return little by little, I have gotten into car settings, but It...
  11. R

    Post Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

    Hello gentlemen, I just managed to get my 1920x720 dasaita equipment on a monitor, I put an MTC that was not yours and it gave me an error on the screen (see photo) when connecting to an external display via HDMI. I was able to change it thanks to a post from a fellow member of the forum, I...
  12. R

    Post Guide how to unlock bricked MCU units

    Well gentlemen, I just disassembled the px6 board, I removed the motherboard and I think I have seen the five holes that you see in the first post in the middle of the board you can see them, if you can confirm that they are those, and the The problem I have is that they are not identified, how...
  13. R

    Post Guide how to unlock bricked MCU units

    That's why I've put it here marchnz, because mine is a matter of MTC, which has blocked me, but if it doesn't go here if you could tell me where it goes I would appreciate it, but I don't see anything with the px6 board, thank you.
  14. R

    Post Guide how to unlock bricked MCU units

    Hello, I have a sterio with a PX6 board, I tried to update the MTC and I was left with a blue screen and a vertical line, I can recover it with the ST-LINK / V2 I have his MC from the seller if so I have to do the steps of the first post, thank you. I put some photos of how it has been and the...
  15. R

    Post Dasaita Max6 PX6 4gb/64gb

    If that's what I think, everything will continue the same when I try it for someone else, but I have to discard things.