Recent content by santoshk22

  1. S

    Post Can't restore twrp backup.

    Boot to twrp and "format data" from wipe section and then restore your old backup.
  2. S

    Post Phone Charging Issue

    I think you have smart charging enabled. If YES, Just set the start point close to the stop charging point, if you have this option there OR just disable smart charging and see if it solves the issue. Also, this may be due to ACC( Advanced Charging Controller Magisk Module). If YES, remove it...
  3. S

    Post [DISCONTINUED]-[PIE]-[ROM]-[OFFICIAL]-[17.09.19]-Havoc-OS-v2.9-[9.0-FINAL]

    update to latest twrp and flash firmware first then flash rom and gapps , reboot
  4. S

    Post [HELP] Fingerprint sensor stopped working.

    Persist partition will be available ONLY if you had taken a full nandroid backup via TWRP. If you have any backup made before the problem occured, then just go to twrp and select restore, select only twrp and swipe to restore and reboot. ---------- Post added at 09:58 AM ---------- Previous...
  5. S

    Post [HELP] Fingerprint sensor stopped working.

    hey there, you need to restore your persist partition, that will solve the issue. Also, try re-flashing the firmware first, if doesn't work, then last option would be to restore persist. I don't think fastboot stock miui would help but you can try as a last resort. Even if it doesn't work...
  6. S

    Post I messed up badly. Need help in reviving my Phone.

    You could have saved a heck lot by just restoring your persist partition from miui backup. Always take backup of persist, if anytime you get error with mi account or wifi bt not working, then just restore old persist and it will work like before. Didn't see this thread first else, i could have...
  7. S

    Post Quick Charge Mod 3.0 ( Redmi 3/S/X/Prime )

    I badly want this to work. But this mod is not working in my 3s prime with dot os v3.1.1. Also, I'm using stock charger and i have usb ammeter always connected to see current flow. I don't trust ampere or other apps for current measurement. I have seen with default kernel i get 1.65Amps when...
  8. S

    Post [DISCONTINUED]-[PIE]-[ROM]-[OFFICIAL]-[17.09.19]-Havoc-OS-v2.9-[9.0-FINAL]

    I think you messed yp with your persist partition. If you have any nandroid backup. then restore the persist partition. Fp will start working.
  9. S

    Post [ROM][OFFICIAL][DOTOS 9.0.0]Redmi 3S/X/Prime(Land)[STABLE][TREBLE]

    Why doesn't it seem to have fast charge? Any working mod to enable fast charge?
  10. S

    Post [DISCONTINUED]-[PIE]-[ROM]-[OFFICIAL]-[17.09.19]-Havoc-OS-v2.9-[9.0-FINAL]

    I'm on Dot Os 3..1.1 . Its enforcing too. Will try after some days.
  11. S

    Post [DISCONTINUED]-[PIE]-[ROM]-[OFFICIAL]-[17.09.19]-Havoc-OS-v2.9-[9.0-FINAL]

    I'm having issues with GPS accuracy. My location is shown almost 100 metres away from my actual location. Sometimes this distance is 4kms aparts from my actual location. I calibrated the compass as shown in google maps. But still the location issue is present. Also, the blue dot keeps moving...
  12. S

    Post [ROM] [9.0] XIAOMI EU (Pie) port for Redmi 3s/prime/3s+

    Yes. Fastboot Rom is a must. And make sure you backup your internal storage as it will be wiped in the process.
  13. S

    Post [ROM] [9.0] XIAOMI EU (Pie) port for Redmi 3s/prime/3s+

    Try flash from PC via MiFlash tool, Check "clean all" at the right bottom of window, Don't check "clean all and lock", which is the default option. Also unzip the zip file on desktop or directly to the root of any drive. If you choose to unzip inside any folder, then make sure the folders...
  14. S

    Post [ROM] [9.0] XIAOMI EU (Pie) port for Redmi 3s/prime/3s+

    Thanks for the quick reply. Is it possible to change dpi settings? I prefer 6x3 icons in QS Panel. Any such customisation is available in the ROM bro? ---------- Post added at 11:13 AM ---------- Previous post was at 11:10 AM ---------- Hey bro, You rectified link errors for Theme Fix and...
  15. S

    Post [ROM] [9.0] XIAOMI EU (Pie) port for Redmi 3s/prime/3s+

    Hey, Please remove the DOUBLE INVERTED COMMA AND SQUARE BRACKET after both the Theme Fix and GCam v6.2 llnks on the first page. Links are working fine without those. ---------- Post added at 07:28 AM ---------- Previous post was at 07:05 AM ---------- Please add some screenshots of...