Recent content by spaic

So then it is weird that usb host diagnostics says it does not work on the LT30p? Or maybe there is a problem with the test procedure for the diagnostic app? I am looking for a phone with OTG (maybe cheaper than the T), and my two sources are XDA-dev and http://usbhost.chainfire.eu/, and...

You are probably right here. I'm still considering my options.

Thanks for the reply. I guess I'll wait for a JB for the S3 and see if OTG works. Actually what I want is OTG, to be able do download pictures off the camera, and the One S (even S3) would be a nice choice, overall. At the moment I'm using an Optimus One, and I'm quite happy with it, except for...

I've looked around for quite a bit, and I haven't found a definitive answer for my question: Does the S3 One S support USB OTG? If so, is it with or without external power? I'm thinking of getting one, but only if it has OTG. The chipset (S3) apparently supports it, but can it be used? All...

As far as I know it does not support usb host or OTG out of the box. Also I don't know if the sources are there for usb host or otg, in order to be compiled in the kernel. I think that they are, because nobody bothers to remove the sources, they just don't compile them into the kernel. Also, as...

for my phone it did not work. The cable I use is the CA157 filed to fit in the connector om the phone. The problem is that the the O1 does not provide USB power, so you need to hack that in some way (use some external power supply), which I did. Also, I have tried several kernels (stock, mik...

This was reported to be working by the original poser of this thread, who also did the first steps of development. I only gathered some info (posted here on this thread). In my case it did not work (don't know why... maybe OS version) The thing is that the driver for USB host generally IS in...

rooted, tweaked, some stock apps removed, installed franco kernel, but I am still using the stock rom because I do't want to lose the apps I have installed and all the data, as I have mentioned. I guess a good backup program (for data, apps, sms) would also do the same thing, in the end, but I...

I was wondering if you can deodex a stock froyo rom, or at least how to get a deodexed rom on the phone without losing all the data on it. I have been using the phone for about half a year and I don't want to lose all the info on it (SMS, emails - lotus, apps, settings etc.) Thanks in advance

I got it to work by extracting the zips and then making new ones on a computer (using winrar to archive the the files as zip). Maybe something was wrong with the archives... Anyway, it worked, and now i am using the new kernel. And it works great. Thanks! Sent from my LG-P500 using XDA App

bad archive? Hi, I have downloaded the v18.1 and been trying to flash (after the wipes), but I'm getting the following message: E:Can't open /sdcard/fraK181.zip (bad) I have tried to rename the file so it is shorter, etc. The zip does not open on the phone either (using astro), like it is a...

still no luck for me... I get <6>[ 4.043033] msm_otg_suspend: usb in low power mode whatever I do. (I don't know if this means that USB is changing mode) I attached 3 dmesg output files: first pluged in the micro usb port, pressed power after the battery chaging image appered. same as...

You will have to use a Y usb cable. There are some pictures of my cables, and a general schematic. What he meant by "the microUSB-A cable and power source connected" was actually "provide USB power to the bus from an external source, because the phone does not provide power to the USB bus"...

1) ~150mV (voltage only goes from the usb port to the phone not vice versa; maybe there is some way to activate the power flow from the phone to the usb port to enable sensing on pin 4 of the micro usb port and to power external devices? I've seen it somewhere) 2) -120 mV dc, 40mV ac on D-...

Finally got a usb otg cable... bought another CA-157 (with micro USB A plug) and managed to grind the corners that were in the way. Also hacked a Y cable with two usb A male and one usb A female connectors (one of the male plugs is there only for the power - attached picture) The bad thing is...