Recent content by vantt1

  1. vantt1

    Post [UNBRICK][BETA] HTC Unbricking Project

    I still have the files from back when I first tried the unbrick tool in 2017 (it didn’t work), and that Android File Host link also works. Tried it again today on a different M7, also didn’t work. Tested on both 32-bit and 64-bit Ubuntu systems, USB 2.0 and USB 3.0 ports. Also tried running...
  2. vantt1

    Post Razr HD as Car PC - Starting without Battery? Display ONLY over HDMI?

    1. The factory cable can boot up the phone all the way, but I've only ever managed to boot it into factory mode (or whatever it's called) without a battery connected. And if you are going to wire up 3.7/3.8V directly to the phone, it might be better to separate the charging IC from the battery...
  3. vantt1

    Post [HELP THREAD][Motorola Droid Razr HD][XT926-XT925] Ask ANY Question. Noob Friendly

    No custom ROMs work? I have an XT925 with an unlocked bootloader and it was stuck in AP fastboot mode for some time before I unlocked the bootloader and flashed TWRP recovery 2.8.6.0. RSD Lite still won't flash 4.0.4 or 4.1.2 and just returns: downgraded security version update gpt_main...
  4. vantt1

    Post [MOD] Upgrade your rotational vibrate motor to a OnePlus 2-like coin vibration motor!

    You could do that, that's up to you. I personally have no use for an extra speaker flex, so I'd prefer to modify my existing one.
  5. vantt1

    Post [Repair guide] OnePlus One Full Disassembly/Screen Replacement + Re-assembly Tutorial

    Yes, it has to have the same specs as the original panel or else it won't work.
  6. vantt1

    Post Fixing the touch issues for good! (it was never a software problem (for me, anyway))

    Yeah, hairdryers are probably designed so that they aren't hot enough to quickly cause severe burns when used.
  7. vantt1

    Post [Repair guide] OnePlus One Full Disassembly/Screen Replacement + Re-assembly Tutorial

    I think the lockscreen has a slightly larger trigger area for pulling down the status bar.
  8. vantt1

    Post Fixing the touch issues for good! (it was never a software problem (for me, anyway))

    I used to have problems with the touchscreen regardless of ROM or kernel, but I didn't stick around to wait for one that worked.
  9. vantt1

    Post Fixing the touch issues for good! (it was never a software problem (for me, anyway))

    That should be enough. It looks like the 3M tape also covers the area underneath the digitizer flex up top. The long flex is for the LCD and it shouldn't affect the functionality of the touchscreen.
  10. vantt1

    Post [Repair guide] OnePlus One Full Disassembly/Screen Replacement + Re-assembly Tutorial

    It's not that important. The screen will work without it. Install Yet Another MultiTouch Test and try drawing across the top area and see if there's a dead zone.
  11. vantt1

    Post [MOD] Upgrade your rotational vibrate motor to a OnePlus 2-like coin vibration motor!

    You could try wiring up a motor from an LG G3 or something. At least you know how it feels in a phone. Strange that there seems to be so much deviation between different OPOs. My new motor is definitely stronger than my old one.
  12. vantt1

    Post [MOD] Upgrade your rotational vibrate motor to a OnePlus 2-like coin vibration motor!

    Still better than the OPO's motor ¯¯\_(ツ)_/¯¯
  13. vantt1

    Post [MOD] Upgrade your rotational vibrate motor to a OnePlus 2-like coin vibration motor!

    Nice! That's like a twincharger, but with vibrate motors!