FORUMS

Ultimate Pro 5 (Kernel)

12 posts
Thanks Meter: 9
 
By Notpalik, Junior Member on 7th February 2016, 06:31 PM
Thread Closed Email Thread
Hi guys, today mcaserg to download a custom kernel for our device.
Flash the kernel can only be unlocked bootloader!

Do not be surprised serial number  kernel, so it is necessary.
This Kernel Include:
-Assembled On Linaro 4.9.3
-Built AutoRoot - after flashing Ruth appears kernel without Flaim-account, just a convenience store can download and update the binary SuperSu if required
-Built Fully support Synapse (it should be set to the convenience store) for the management of all core parameters. To configure the kernel to use only Synapse and more than any other prog!
-Built Busybox for synapse
-Ability Acceleration / daunklokinga - CPU and GPU Freq Control
The frequency of the small cluster A53 can be adjusted from 200 to 1800 MHz
The frequency of a large cluster A57 - from 500 to 2300 MHz
The frequency of the GPU - from 266 to 772 MHz
-Full Management regulations of all possible stress -CPU / GPU / HMP / Memory / ISP / InternalBus Voltage Control
-Full Port missing drivers and settings from the source of Note5 - Dm_CPU_Hotplug, Exynos-mp-cpufreq, Touch_Boost driver and another pile, which are absent in the gnarled meyzushnyh source code.
-Ktoonservative CPU governor, Interactive MultiMod CPU governor of Not5 c profiles
-CPU / GPU / MIF / ISP Thermal Control
-HMP Control and the ability to disable the cluster core A57
GPU -Full management
-IO Control, FSync On / Off
-Memory Control
-Network Control
-Crontab Service, Fstrim Control
-Support Init.d

P.S. Due to the fact that the Chinese sources laid heavily cropped, they are missing important parts of the code, in particular - that the controls built into the firmware the ability to switch modes of performance / autonomy. Therefore, custom kernels (if the Chinese do not renew on a human source) will not have any effect nominal adjustment "Power Mode" in the "Power Management".

P.P.S - of the found bugs that do not affect performance and functionality - after flashing a serial phone number is not defined, writes Unkown. After flashing back to stock kernel serial also appears back - TESTED
Thanks mcaserg.
Upd.1
Firmware 5.1.3.0g with a bootloader that does not fly unlock and embedded core Ultimate Kernel v.5.
All flash only on unlocked bootloader as usual official firmware. It is best to do a wipe data. If you do not hold down the power button is turned on, the home button and wait for the shutdown.
You're doing it at your own risk.
LINK

XDA:DevDB Information
Custom Kernel Meizu Pro 5, Kernel for the Meizu MX

Contributors
Notpalik, mcaserg
Source Code: https://drive.google.com/file/d/0B5B...p=docslist_api

Kernel Special Features:

Version Information
Status: Testing
Current Stable Version: 5
Current Beta Version: 5.0
Beta Release Date: 2016-02-07

Created 2016-02-07
Last Updated 2016-02-09
The Following 4 Users Say Thank You to Notpalik For This Useful Post: [ View ] Gift Notpalik Ad-Free
8th February 2016, 12:17 PM |#2  
TheUltrametricSpace's Avatar
Senior Member
Flag Tromso
Thanks Meter: 318
 
Donate to Me
More
Quote:
Originally Posted by Notpalik

Hi guys, today mcaserg to download a custom kernel for our device.
Flash the kernel can only be unlocked bootloader!

Do not be surprised serial number  kernel, so it is necessary.
This Kernel Include:
-Assembled On Linaro 4.9.3
-Built AutoRoot - after flashing Ruth appears kernel without Flaim-account, just a convenience store can download and update the binary SuperSu if required
-Built Fully support Synapse (it should be set to the convenience store) for the management of all core parameters. To configure the kernel to use only Synapse and more than any other prog!
-Built Busybox for synapse
-Ability Acceleration / daunklokinga - CPU and GPU Freq Control
The frequency of the small cluster A53 can be adjusted from 200 to 1800 MHz
The frequency of a large cluster A57 - from 500 to 2300 MHz
The frequency of the GPU - from 266 to 772 MHz
-Full Management regulations of all possible stress -CPU / GPU / HMP / Memory / ISP / InternalBus Voltage Control
-Full Port missing drivers and settings from the source of Note5 - Dm_CPU_Hotplug, Exynos-mp-cpufreq, Touch_Boost driver and another pile, which are absent in the gnarled meyzushnyh source code.
-Ktoonservative CPU governor, Interactive MultiMod CPU governor of Not5 c profiles
-CPU / GPU / MIF / ISP Thermal Control
-HMP Control and the ability to disable the cluster core A57
GPU -Full management
-IO Control, FSync On / Off
-Memory Control
-Network Control
-Crontab Service, Fstrim Control
-Support Init.d

P.S. Due to the fact that the Chinese sources laid heavily cropped, they are missing important parts of the code, in particular - that the controls built into the firmware the ability to switch modes of performance / autonomy. Therefore, custom kernels (if the Chinese do not renew on a human source) will not have any effect nominal adjustment "Power Mode" in the "Power Management".

P.P.S - of the found bugs that do not affect performance and functionality - after flashing a serial phone number is not defined, writes Unkown. After flashing back to stock kernel serial also appears back - TESTED
Thanks mcaserg.

XDA:DevDB Information
Custom Kernel Meizu Pro 5, Kernel for the Meizu MX

Contributors
Notpalik, mcaserg
Source Code: http://4pda.ru/forum/index.php?showt...ost&p=46909487

Kernel Special Features:

Version Information
Status: Testing
Current Beta Version: 5.0
Beta Release Date: 2016-02-07

Created 2016-02-07
Last Updated 2016-02-07

The download link on the Russian page is still broken.

You don't name the Kernel Version either. Would you add the missing information pretty please.
8th February 2016, 02:28 PM |#3  
Senior Member
Flag Timisoara
Thanks Meter: 417
 
More
Quote:
Originally Posted by TheUltrametricSpace

The download link on the Russian page is still broken.

You don't name the Kernel Version either. Would you add the missing information pretty please.

I think it works now.
8th February 2016, 02:29 PM |#4  
TheUltrametricSpace's Avatar
Senior Member
Flag Tromso
Thanks Meter: 318
 
Donate to Me
More
Quote:
Originally Posted by albireox

I think it works now.

Re-Upload it please to Mega of GoogleDrive. I still get a 404.

for the file called: Прикрепленный файлupdate-Ultimate_Kernel_Pro5_v.5.zip ( 11,31 МБ )
Direct Link: Прикрепленный файлupdate-Ultimate_Kernel_Pro5_v.5.zip ( 11,31 МБ )
8th February 2016, 02:33 PM |#5  
Senior Member
Flag Timisoara
Thanks Meter: 417
 
More
Quote:
Originally Posted by TheUltrametricSpace

Re-Upload it please to Mega of GoogleDrive. I still get a 404.

for the file called: Прикрепленный файлupdate-Ultimate_Kernel_Pro5_v.5.zip ( 11,31 МБ )
Direct Link: Прикрепленный файлupdate-Ultimate_Kernel_Pro5_v.5.zip ( 11,31 МБ )

Here you go : link
The Following 2 Users Say Thank You to albireox For This Useful Post: [ View ] Gift albireox Ad-Free
9th February 2016, 10:11 AM |#6  
Notpalik's Avatar
OP Junior Member
Flag Moscow
Thanks Meter: 9
 
More
New link: DOWNLOAD
The Following User Says Thank You to Notpalik For This Useful Post: [ View ] Gift Notpalik Ad-Free
9th February 2016, 10:16 AM |#7  
Notpalik's Avatar
OP Junior Member
Flag Moscow
Thanks Meter: 9
 
More
Firmware 5.1.3.0g with a bootloader that does not fly and unlock embedded core Ultimate Kernel v.5.
All flash only on unlocked bootloader as usual official firmware. It is best to do a wipe data. If you do not hold down the power button is turned on, the home button and wait for the shutdown.
You're doing it at your own risk.
Link1
10th February 2016, 03:47 PM |#8  
Alex-stroev's Avatar
Senior Member
Flag Moscow
Thanks Meter: 89
 
More
Quote:
Originally Posted by Notpalik

Upd.1
Firmware 5.1.3.0g with a bootloader that does not fly unlock and embedded core Ultimate Kernel v.5.
All flash only on unlocked bootloader as usual official firmware. It is best to do a wipe data. If you do not hold down the power button is turned on, the home button and wait for the shutdown.
You're doing it at your own risk.
LINK

Hello. Why do not you ask me whether it is possible to place the firmware on xda. Directly linking. Firstly, this link has been removed. So I changed something. Secondly's original link http://4pda.ru/forum/index.php?showtopic=724754&st=20
And please do not lay out more than the direct download link. And do not download the firmware to the mirror.
10th February 2016, 06:28 PM |#9  
Perseus's Avatar
Retired Senior Moderator / Recognized Developer
Atlantis
Thanks Meter: 9,189
 
Donate to Me
More
Thread closed on OP Request.
Thread Closed Subscribe to Thread

Tags
custom, exynos, kernel, meizu, pro 5
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes