https://androidfilehost.com/?fid=1395089523397968817Do you have link for the new twrp? I have run f2fs in aicp, though twrp recovery in inactive slot doesnt run properly
https://androidfilehost.com/?fid=1395089523397968817Do you have link for the new twrp? I have run f2fs in aicp, though twrp recovery in inactive slot doesnt run properly
Do you have the persistent zip file? Just in case
Advanced > install recovery ramdisk
This issue went away on its own after some reboot and this time even after resetting battery stats the temperature sensor is working correctly. Don't know what causes it and what fixes it.The battery temperature reading is stuck at 36ᵒC on AICP after resetting the battery stats from Settings>Battery. This is the second time this happened. First time it was stuck at 29ᵒC and I didn't know what caused it but I fixed it by the following method-
Booted to TWRP and TWRP CPU Temperature was also stuck at 29ᵒ
Clean flashed AEX by wiping data and system but the reading was still stuck at 29ᵒ on AEX.
Reset the battery stat on AEX and deleted the TWRP folder on internal storage and rebooted and it was showing the temperature correctly. I did both steps before rebooting so don't know which worked.
Flashed back AICP and it was working there too.
Same kernel with latest havoc?New AICP build 22/05 for jasmine_sprout and wayne
Use minimal EAS implimentation
Raised boost values
Updated Blobs to LA.UM.7.2.r1-06900-sdm660.0
Updated GPS to LA.UM.7.2.r1-06900-sdm660.0
https://dwnld.aicp-rom.com
I am coming from stock pie. whenever I try to flash AICP, via TWRP, it says, "error applying update: 7(errorcode::kinstalldeviceoppenerror) updater process ended with error 1".
Need help here ASAP. As I unable to boot to system right now. Using TWRP : 3.3.1
As mentioned in the guide, use twrp 3.2.3I am coming from stock pie. whenever I try to flash AICP, via TWRP, it says, "error applying update: 7(errorcode::kinstalldeviceoppenerror) updater process ended with error 1".
Need help here ASAP. As I unable to boot to system right now. Using TWRP : 3.3.1
Build failed and I haven't had time to fix, will release once I have time
Build failed and I haven't had time to fix, will release once I have time
If you are on stock, you need to boot to twrp using fastboot. Then before you flash a new rom you need to format (like in the tutorial on the first page):
"First go to wipe > advanced and select System and Data then wipe, then you can start flashing"
and then you flash this rom. You can NOT flash this rom directly from twrp using the vol+ and power button, if you come from stock.
The best is if you follow the guide from first page.
Ps: I used twrp 3.2.3 for this process (in the fastboot step, boot to the 3.2.3 twrp image).
As mentioned in the guide, use twrp 3.2.3
Build failed and I haven't had time to fix, will release once I have time
Flash oreo baseI have tried already all this. Only thing that's bugging me is, that twrp 3.2.3 doesn't work in my device. I just get a black screen whenever I boot into it.
---------- Post added at 09:28 PM ---------- Previous post was at 09:26 PM ----------
Don't know why, but that Twrp veraion is not working on my device. Is there any explanation regarding this?
I am totally confused that twrp is not getting to work for me.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/