FORUMS

[ROM] [OFFICIAL] BlissRoms [bullhead]

3,291 posts
Thanks Meter: 9,162
 
By jackeagle, Forum Moderator / Developer Relations / Recognized Developer on 6th November 2019, 10:38 AM
Post Reply Email Thread
Announcement from jackeagle: BlissRoms 12.7 rolling out now!

team bliss is pleased to present to you
bliss rom based on Android 10


Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customizations across all platforms you run Bliss on.
Bliss ROMs comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.

AIO Thread


Bliss Source
https://github.com/BlissRoms

BlissRoms Device Sources
https://github.com/BlissRoms-Devices



Bliss Device Downloads
SourceForge



As of Now OpenGapps ARM64 10.0 is Suggested for the Nexus 5x (Bullhead) and is found below
OpenGapps Project



Team Bliss is not responsible in any way for anything that happens to your device in the process of installing
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom. Please make sure you download the correct version of Bliss for your specific device. The links are labeled clearly.
  • Make sure you are rooted
  • Make sure you have a custom recovery installed(TWRP is the preferred recovery)
  • Download the latest Bliss Rom & the latest GApps package
  • Boot into recovery
  • Backup your current ROM
  • Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
  • Flash Bliss Rom
  • Flash Google Apps package
  • Flash Root of your choice(Unless OP states otherwise)
  • First boot may take up to 10 minutes. This is due to Gapps and root optimization.

[*] None

If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you and our team quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving.
As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the forum with a brief description of the error.

@Jackeagle @electrikjesus @rwaterspf1 @Makaveli_da_dev @ElfinJNoty @BitOBSessiOn @customworx
@nilac @sixohtew @aclegg2011 @Roger.T @T.M.Wrath @kanttii @rev3nt3ch @techfreak243 @SuperDroidBond @USA_RedDragon @bcrichster
@deadmanxXD @krittin98 @BlackScorpion @techexhibeo @droidbot @siphonay @pacer456 @nitin1438 @theGeekyLad @kunalshah912 @regalstreak @lordarcadius


@ideaman924 @ideaman924[/B]

Huge thanks to @lakshay and @flipflop for allowing us to use their device tree and kernel!

A huge thanks to Chainfire, CM/LineageOS, Android-x86, Jide, @farmerbb & all the other developers who work hard to keep all the great features coming!
We really appreciate all your knowledge & hard work!

Team Bliss aims to develop and maintain various OS & software projects for educational and the Android community building purposes. Team membership consist of and provides:
training, development opportunities, design opportunities, build servers, download servers, design & development software,as well as professionals and mentors in all fields revolving around Android development.
If someone wants to donate, please do so via this PayPal link:

PayPal Link
WE ARE A U.S. FEDERAL NON-PROFIT ORGANIZATION (501c3)

We receive a small donation each time you make a purchase with “Amazon Smile”:
https://smile.amazon.com/ch/82-3580195



Notice

The OP and most recent discussions will generally help to answer any questions you will encounter. If not, we will do our best to answer your questions & concerns as soon as possible.
We will also simply direct you to the OP if the answer is contained there. We encourage community minded interactions: users helping fellow users allows Team Bliss to focus on the work involved to make things Blissful.
Please do not ask for ETA's
We will not tolerate any rudeness or anyone being disrespectful in this thread. Moderators, feel free to enforce anything you feel is necessary to stop bad posts

Team Bliss will allow some minor off-topic comments in our development threads. Please post in the general forums for off-topic comments and/or questions. Overall, please keep comments relevant to development, as this better helps you and our teamwhen trying to determine problems that users are having. We appreciate all levels of knowledge in our threads, and therefore we ask that the seasoned members be helpful to those with less knowledge. Most importantly, do NOT troll those with less knowledge than yourself.
Should you feel inclined to not abide by our request, the XDA Moderators may be called in to remove posts. We thank you for adhering to our thread rules.



Website
https://blissroms.com

Official Platform Links
https://www.facebook.comBlissFamilyOfROMs
https://twitter.com/Bliss_ROMs
https://www.instagram.com/blissroms

Thank you for using Bliss! And as always: #StayBlissful

XDA:DevDB Information
BlissRoms, ROM for the LG Nexus 5X

Contributors
jackeagle, ideaman924
Source Code: https://github.com/BlissRoms

ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Pie

Version Information
Status: Stable
Current Stable Version: 12.7
Stable Release Date: 2020-06-10

Created 2019-11-06
Last Updated 2020-06-28
The Following 18 Users Say Thank You to jackeagle For This Useful Post: [ View ]
6th November 2019, 10:38 AM |#2  
ideaman924's Avatar
Member
Thanks Meter: 418
 
More
Reserved
The Following 11 Users Say Thank You to ideaman924 For This Useful Post: [ View ] Gift ideaman924 Ad-Free
6th November 2019, 03:36 PM |#4  
Senior Member
Flag Heidelberg
Thanks Meter: 78
 
More
**first** Awesome glad to see someone developing for older devices. Thanks a lot...
The Following 3 Users Say Thank You to Andiii For This Useful Post: [ View ] Gift Andiii Ad-Free
6th November 2019, 04:09 PM |#5  
jeremywh7's Avatar
Senior Member
Indy
Thanks Meter: 105
 
More
Funny, I decided last night I was going to install the new NexusROM today, and copied everything off, to discover Bliss Q this morning! However, I updated the Android platform-tools, wiped everything, and formatted Data; but after the ROM sideload TWRP says "No OS installed!" ? Fwiw, I had been on the Bliss Pie 20190920 build for a while, and had no issues. Thanks though for the work on Q!

EDIT: Ok, wiped/formatted again, used `adb push` this time for BlissQ and open_gapps-arm64-10.0-stock-20191105-BETA, then installed from TWRP...and booting up now. Is `adb sideload` on bullhead via TWRP a known issue with A10? Nice boot animation!
EDIT2: I can't get past the "Copy apps and data" part of setup, even if I try to skip it., getting this crash: "Google Play services keeps stopping" and it cycles from "Just a sec" to Checking Info" to "Checking for Updates" b/t each crash. Tried rebooting; no more Play Services crash did just cycles b/t "Just a sec" and "Checking for Updates" then eventually goes back to the "Copy apps and data" page (incl still with the "Don't Copy" option). Then it random rebooted and got stuck on the boot animation until I forced it off and back on. :-|
EDIT3: Flashed open_gapps-arm64-10.0-stock-20191006-BETA and after backing up to the setup start, the "Copy apps and data" wizard eventually says, "Couldn't sign in: There was a problem communicating with Google servers. Try again later." So I'll wait until I'm on a non-guest network.
EDIT4: After messing with it more, with more random and intentional reboots, it finally got thru setup. Still can't add a Google acct though.
The Following 2 Users Say Thank You to jeremywh7 For This Useful Post: [ View ] Gift jeremywh7 Ad-Free
GuestK00387
6th November 2019, 07:12 PM |#6  
Guest
Thanks Meter: 0
 
More
Same here, system locks up after trying to restore apps/data and have to hard reboot out. Will try with the latest gapps beta in a bit as I was using the 20191006 rather than 20191105 packages.

Edit: did a full wipe and formatted data reflashed with opengapps 10 beta mini package build date 20191105. Booted up and is currently restoring from Google backup.
The Following User Says Thank You to For This Useful Post: [ View ] Gift Ad-Free
6th November 2019, 10:19 PM |#7  
Member
Thanks Meter: 16
 
More
Got it working.
Since this is a new ROM, you'll need to format DATA in TWRP in addition to the instructions in the OP. I also used the nano package from OpenGApps.
The Following User Says Thank You to Ritwyk For This Useful Post: [ View ] Gift Ritwyk Ad-Free
7th November 2019, 04:11 AM |#8  
jackeagle's Avatar
OP Forum Moderator / Developer Relations / Recognized Developer
Flag XDA
Thanks Meter: 9,162
 
Donate to Me
More
Quote:
Originally Posted by jeremywh7

Funny, I decided last night I was going to install the new NexusROM today, and copied everything off, to discover Bliss Q this morning! However, I updated the Android platform-tools, wiped everything, and formatted Data; but after the ROM sideload TWRP says "No OS installed!" ? Fwiw, I had been on the Bliss Pie 20190920 build for a while, and had no issues. Thanks though for the work on Q!

EDIT: Ok, wiped/formatted again, used `adb push` this time for BlissQ and open_gapps-arm64-10.0-stock-20191105-BETA, then installed from TWRP...and booting up now. Is `adb sideload` on bullhead via TWRP a known issue with A10? Nice boot animation!
EDIT2: I can't get past the "Copy apps and data" part of setup, even if I try to skip it., getting this crash: "Google Play services keeps stopping" and it cycles from "Just a sec" to Checking Info" to "Checking for Updates" b/t each crash. Tried rebooting; no more Play Services crash did just cycles b/t "Just a sec" and "Checking for Updates" then eventually goes back to the "Copy apps and data" page (incl still with the "Don't Copy" option). Then it random rebooted and got stuck on the boot animation until I forced it off and back on. :-|
EDIT3: Flashed open_gapps-arm64-10.0-stock-20191006-BETA and after backing up to the setup start, the "Copy apps and data" wizard eventually says, "Couldn't sign in: There was a problem communicating with Google servers. Try again later." So I'll wait until I'm on a non-guest network.
EDIT4: After messing with it more, with more random and intentional reboots, it finally got thru setup. Still can't add a Google acct though.

Thank you for kind words and glad you liked it!
Since this is new Rom you have to wipe Data partition during flash. Probably that is why you are facing that issue
Also Gapps OpenGapps some variants have issues so you can flash Bitgapps which works flawlessly i will link that thread here
https://forum.xda-developers.com/and...0-0-0-t3968500
Let me know if u face any issues

Enjoy!
#StayBlissful
The Following 4 Users Say Thank You to jackeagle For This Useful Post: [ View ]
7th November 2019, 04:27 AM |#9  
jeremywh7's Avatar
Senior Member
Indy
Thanks Meter: 105
 
More
Quote:
Originally Posted by Ritwyk

Since this is a new ROM, you'll need to format DATA in TWRP in addition to the instructions in the OP. I also used the nano package from OpenGApps.

Quote:
Originally Posted by jackeagle

Since this is new Rom you have to wipe Data partition during flash. Probably that is why you are facing that issue

As stated, I had "wiped everything, and formatted Data" which included wiping Data and then also formatting it.

I was able to get the Google Setup to work fine after cleaning installing with the Stock 20191006 OpenGapps, but by this time I was testing NexusROM. When I tried that version on BlissQ, I just did a dirty flash since I hadn't been able to get thru the setup at that point. I suspect a clean flash would also work fine for it. I'm sure I'll be back on Bliss soon for more testing though...
7th November 2019, 07:20 AM |#10  
jackeagle's Avatar
OP Forum Moderator / Developer Relations / Recognized Developer
Flag XDA
Thanks Meter: 9,162
 
Donate to Me
More
Quote:
Originally Posted by jeremywh7

As stated, I had "wiped everything, and formatted Data" which included wiping Data and then also formatting it.

I was able to get the Google Setup to work fine after cleaning installing with the Stock 20191006 OpenGapps, but by this time I was testing NexusROM. When I tried that version on BlissQ, I just did a dirty flash since I hadn't been able to get thru the setup at that point. I suspect a clean flash would also work fine for it. I'm sure I'll be back on Bliss soon for more testing though...

Oh cool cool then ya it will work fine with clean flash
Sure! Happy flashing
The Following User Says Thank You to jackeagle For This Useful Post: [ View ]
7th November 2019, 11:34 AM |#11  
Junior Member
Thanks Meter: 1
 
More
It's the best android10 rom from now on.
Sometimes pattern lock setting crashes. So I have to delete locksettings.db to unlock. And chrome has blank page(It can be caused by yesterday update of chrome...).
How can I repair that kind of problems?
The Following User Says Thank You to TRIPLEFIRST For This Useful Post: [ View ] Gift TRIPLEFIRST Ad-Free
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes