FORUMS
Remove All Ads from XDA

 View Poll Results: Switch to franco kernel?

Yes
 
15 Vote(s)
88.24%
No
 
2 Vote(s)
11.76%

[ROM][OFFICIAL] Bliss ROMS v11.8 - Shamu [Pie][4.8.19]

106 posts
Thanks Meter: 324
 
By aclegg2011, Senior Member on 27th October 2018, 09:09 PM
Post Reply Email Thread

team bliss is pleased to present to you
bliss rom based on Android 9 Pie

Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customizations across all platforms you run Bliss on.
Bliss ROMs comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.

Notice

The OP and most recent discussions will generally help to answer any questions you will encounter. If not, we will do our best to answer your questions & concerns as soon as possible.
We will also simply direct you to the OP if the answer is contained there. We encourage community minded interactions: users helping fellow users allows Team Bliss to focus on the work involved to make things Blissful.
Please do not ask for ETA's
We will not tolerate any rudeness or anyone being disrespectful in this thread. Moderators, feel free to enforce anything you feel is necessary to stop bad posts




Bliss Source

BlissRoms Devices Source

BlissRoms Kernel Source

BlissRoms Vendor Source


We suggest using OpenGapps, but if your device maintainer mentions otherwise, please go with that suggestion.


Bliss Device Downloads


Team Bliss is not responsible in any way for anything that happens to your device in the process of installing
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom. Please make sure you download the correct version of Bliss for your specific device. The links are labeled clearly.

Make sure you are rooted
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Bliss Rom & the latest GApps package
Boot into recovery
Backup your current ROM
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash Bliss Rom
Flash Google Apps package
Flash Root of your choice(Unless OP states otherwise)
First boot may take up to 10 minutes. This is due to Gapps and root optimization.



[*] None reported yet

If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you and our team quite some time.

Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving.
As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the forum with a brief description of the error.


@Jackeagle @electrikjesus @rfwaterspf1 @Makaveli_da_dev @ElfinJNoty @BitOBSessiOn @customworx
@nilac @sixohtew @aclegg2011 @Roger.T @T.M.Wrath @kanttii @rev3nt3ch @techfreak243 @SuperDroidBond @USA_RedDragon @bcrichster
@deadmanxXD @krittin98 @BlackScorpion @techexhibeo @droidbot @siphonay @pacer456 @nitin1438 @theGeekyLad @kunalshah912 @regalstreak @lordarcadius
A huge thanks to Chainfire, CM/LineageOS, Android-x86, Jide, @farmerbb & all the other developers who work hard to keep all the great features coming!
We really appreciate all your knowledge & hard work!

Team Bliss aims to develop and maintain various OS & software projects for educational and the Android community building purposes. Team membership consist of and provides:
training, development opportunities, design opportunities, build servers, download servers, design & development software,as well as professionals and mentors in all fields revolving around Android development.
If someone wants to donate, please do so via this PayPal link:
WE ARE A U.S. FEDERAL NON-PROFIT ORGANIZATION (501c3)
We receive a small donation each time you make a purchase with “Amazon Smile”:
https://smile.amazon.com/ch/82-3580195

Very Important Information
Team Bliss will allow some minor off-topic comments in our development threads. Please post in the general forums for off-topic comments and/or questions. Overall, please keep comments relevant to development, as this better helps you and our teamwhen trying to determine problems that users are having. We appreciate all levels of knowledge in our threads, and therefore we ask that the seasoned members be helpful to those with less knowledge. Most importantly, do NOT troll those with less knowledge than yourself.
Should you feel inclined to not abide by our request, the XDA Moderators may be called in to remove posts. We thank you for adhering to our thread rules.


Website

Telegram Communities


Official Platform Links

Thank you for using Bliss! And as always: #StayBlissful

Changelog:
Code:
====================
     04-08-2019
====================


   * device/moto/shamu/
0726bba Merge pull request #1 from LineageOS/lineage-16.0
5c7f4f6 shamu: set kernel to permissive
6d202e1 shamu: blissify

   * kernel/moto/shamu/
c8e2a75 Merge pull request #1 from LineageOS/lineage-16.0

   * vendor/bliss/
253f91b Merge pull request #4 from BlissRoms/p9.0
85e2db7 versions: Bump to v11.8 Release

   * vendor/motorola/
bb7e97d Merge pull request #1 from TheMuppets/lineage-16.0

====================
     04-07-2019
====================


   * hardware/qcom/fm/
d78abd7 Automatic translation import

====================
     04-06-2019
====================


====================
     04-05-2019
====================


====================
     04-04-2019
====================


   * device/moto/shamu/
8d58da1 shamu: Expand brightness levels for very dark rooms

   * external/exfat/
e346c7c exfat: Rename utf conversion symbols
9e9dc69 exfat: Add static libs for recovery

====================
     04-03-2019
====================


   * build/make/
a269ac0 Let's go a step further with the ANSI logo

   * kernel/moto/shamu/
f6e656d ASoC: msm: qdsp6v2: Change audio drivers to use %pK
8ae5513 ASoC: msm: qdsp6v2: add range check for audio port index
a324b4a qdsp6v2: apr: check for packet size to header size comparison
3bc8c53 ASoC: msm: qdspv2: initialize variables before use
fd3ecc8 ASoC: msm: qdsp6v2: add support for any number of ASM buffers
44a98e5 ASoC: msm: qdspv2: add spin lock to protect ac
db5c42f ASoC: q6asm: add the error handling for the interfaces from asm driver
ce04536 ASoC: msm: Add support to improve debug logging
5564eae dsp: codecs: fix range check for audio buffer copying
3d9b116 futex: Replace barrier() in unqueue_me() with READ_ONCE()
e7fcf96 selinux: KASAN: slab-out-of-bounds in xattr_getsecurity
aefde26 net: ipc_router: Initialize the sockaddr in recvmsg() handler
78fdee5 msm: camera: cpp: Check for valid tx level
b905ef4 msm: camera: Fix out of bound read access
3a1e982 input: touchscreen: synaptics_dsx: Fix buffer overflow
a6c568f input: synaptics_dsx_fw_update: modify firmware upgrade procedure
abc9836 msm : mdss: fix unaligned access problem
04b5edf msm: mdss: Fix double free during probe fail
3a1a7a7 msm: VPU: Remove debug code

====================
     04-02-2019
====================


   * build/make/
1458cbc Display Bliss ANSI during flash

   * device/moto/shamu/
261a71a shamu: Remove some default overlays

   * manifest/
69b571d manifest: Track data-ipa-cfg-mgr from LOS

   * vendor/bliss/
58d706a bliss: qcom: Set proper CAF data-ipa-cfg-mgr pathmap
8a61f39 bliss: qcom: Set data-ipa-cfg-mgr pathmap

====================
     04-01-2019
====================


   * vendor/motorola/
dc6ee97 victara: Sync with device tree
0eaa112 victara: Sync makefiles with device tree
2da596f victara: Move ril blobs to vendor
bcff4b0 victara: Ship missing OMX codecs decoders
835ce7b victara: Hex edit libmmcamera_imglib.so hash hdrhax instead of build.prop
46486d6 victara: Remove unused files
4eb8f57 victara: Update WideVine DRM to one-blob solution
49b38b3 victara: Sync with device tree

====================
     03-31-2019
====================


====================
     03-30-2019
====================


   * kernel/google/msm/
ac89f62 Merge pull request #1 from followmsi/followmsi-pie

   * packages/apps/BlissUpdater/
5332614 BlissUpdater: Build using AndroidX
47f7c5a BlissUpdater: Implement auto update check interval preference
4107e70 BlissUpdater: Differentiate reasons for update fetch failure

   * vendor/bliss/
579f34f Merge pull request #3 from BlissRoms/p9.0

====================
     03-29-2019
====================


   * device/moto/shamu/
cd9f670 shamu: Don't DexPreOpt Prebuilts

   * kernel/moto/shamu/
e549810 neigh: do not modify unlinked entries
6fa93b9 BACKPORT: neigh: probe application via netlink in NUD_PROBE

   * packages/apps/BlissUpdater/
85bdca3 BlissUpdater: Migrate to AndroidX
b866ea1 BlissUpdater: Remove URL Link in Update Blocked dialog box
ac041f4 BlissUpdater: Disable BlissUpdater Launcher
1ea2669 BlissUpdater: Blissified Adaptive Icons

   * packages/apps/Calendar/
7c40498 Add .gitreview
cc912ef Calendar: Adaptive Blissified Icons

   * packages/apps/Camera2/
009fdd2 Camera2: Blissified Adaptive Icons

   * packages/apps/Contacts/
d9f68b8 Add .gitreview
b0ebcd4 Contacts: Blissified Adaptive Icons

   * packages/apps/DeskClock/
9010afb Add .gitreview
e3bf9e8 DeskClock: Blissified Adaptive Icons

   * packages/apps/Dialer/
aec5db1 Dialer: Blissified Adaptive Icons

   * packages/apps/DocumentsUI/
91f2283 Add .gitreview
eee30c7 DocumentsUI: Blissified Adaptive Icons

   * packages/apps/Email/
550b8a3 Add .gitreview
915ba5f Email: Blissified Adaptive Icons

   * packages/apps/ExactCalculator/
bb88f86 Add .gitreview
9fee5d7 ExactCalculator: Blissified Adaptive Icons

   * packages/apps/Gallery2/
07bcb0f Add .gitreview
a4d02c0 Gallery2: Blissified Adaptive Icons

   * packages/apps/Messaging/
5b9d923 Add .gitreview
c9763b0 Messaging: Blissified Adaptive Icons

   * packages/apps/OmniSwitch/
3592baa Add .gitreview
038e3ec OmniSwitch: Blissified Adaptive Icons

   * packages/providers/DownloadProvider/
39daf43 DownloadProvider: Blissified Adaptive Icons

   * vendor/bliss/
d04f51e Merge "prebuilt/app: Update AboutBliss" into p9.0
6ab6574 version: Bump to Bliss v11.7 Release
3faf176 prebuilt/app: Update AboutBliss

   * vendor/motorola/
7ce317f nash: Remove liboemcrypto to disable false Widevine L1 report

====================
     03-28-2019
====================


   * build/make/
881206f [x86 builds] Manifest updates for 11.6

   * packages/apps/BlissUpdater/
100413e BlissUpdater: Remove redundant stuff
3ee11b9 BlissUpdater: Show device specific changelog which is generated with build

   * packages/apps/Settings/
412aa14 values: Disable System Updater

   * vendor/bliss/
f9adadb versions: Add prop for Changelog Version

====================
     03-27-2019
====================


   * kernel/moto/shamu/
5ff9bcd netfilter: drop outermost socket lock in getsockopt()
b88eb40 net/dccp: fix use after free in tw_timer_handler()
dc0b463 dccp: CVE-2017-8824: use-after-free in DCCP code
8e4d8f3 cfg80211: check dev_set_name() return value
3d32c26 nl80211: take RCU read lock when calling ieee80211_bss_get_ie()
1498696 ipv4: Avoid reading user iov twice after raw_probe_proto_opt
4afb506 ipv4: Use standard iovec primitive in raw_probe_proto_opt
d0367b7 nl80211: fix nl80211_send_iface() error paths
8fe5eb5 nl80211: don't expose wdev->ssid for most interfaces
1431bf3 VSOCK: Send reset control packet when socket is partially bound
62b665f mac80211: ignore NullFunc frames in the duplicate detection
25e990e mac80211: fix reordering of buffered broadcast packets
89603eb mac80211: always send multicast on CAB queue
8abad4e rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices
85511a1 mac80211: Clear beacon_int in ieee80211_do_stop
aec8193 xfrm: Fix bucket count reported to userspace
b574b1e netfilter: xt_IDLETIMER: add sysfs filename checking routine
3f8b3e0 netfilter: x_tables: add and use xt_check_proc_name
5dff7d9 rtnetlink: Disallow FDB configuration for non-Ethernet device
834d135 net: sched: gred: pass the right attribute to gred_change_table_def()
d7616d6 ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called
2784085 llc: do not use sk_eat_skb()
45213ac net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
f827035 net: make skb_partial_csum_set() more robust against overflows
138cba8 ipv6: take rcu lock in rawv6_send_hdrinc()
a0da3f6 ipv6: Compute net once in raw6_send_hdrinc
e8e3c53 rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
9ac1047 net: sched: act_ipt: check for underflow in __tcf_ipt_init()
7ddc4c6 mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keys
2c2e43c ip_tunnel: be careful when accessing the inner header
5dad654 ip6_tunnel: be careful when accessing the inner header
a60dc1f ipv6: fix possible use-after-free in ip6_xmit()
09d2744 cfg80211: reg: Init wiphy_idx in regulatory_hint_core()
80cb8c9 cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IE
5dcbc55 ipv6: fix cleanup ordering for pingv6 registration
5b478e0 xfrm: Validate address prefix lengths in the xfrm selector.
7dee85b xfrm: fix 'passing zero to ERR_PTR()' warning
6a41f12 packet: refine ring v3 block size test to hold one frame
a4e092b ipv4: remove BUG_ON() from fib_compute_spec_dst
be9bbb5 KEYS: DNS: fix parsing multiple options
728f9aa skbuff: Unconditionally copy pfmemalloc in __skb_clone()
fe1ead3 netfilter: nf_log: don't hold nf_log_mutex during user access
e878a8c xfrm_user: prevent leaking 2 bytes of kernel memory
d296aaf netfilter: ipv6: nf_defrag: reduce struct net memory waste
7618634 rtnetlink: validate attributes in do_setlink()
ace3dfe net: metrics: add proper netlink validation
31beae6 ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
08f98df net/packet: refine check for priv area size
83eef97 ipvs: fix buffer overflow with sync daemon and service
afe788b net: test tailroom before appending to linear skb
3f73cc7 netfilter: ebtables: handle string from userspace with care
c1b1916 tcp: purge write queue in tcp_connect_init()
31575a8 xfrm6: avoid potential infinite loop in _decode_session6()
aa6c560 ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
3f4fc3a sctp: fix the issue that the cookie-ack with auth can't get processed
985740e tcp: fix TCP_REPAIR_QUEUE bound checking
466a1ae sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addr
a1e9ff3 l2tp: check sockaddr length in pppol2tp_connect()
a036f42 ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
d423ddb tcp: don't read out-of-bounds opsize
6fd9c94 llc: fix NULL pointer deref for SOCK_ZAPPED
cc9c136 llc: hold llc_sap before release_sock()
a58d4b2 KEYS: DNS: limit the length of option strings
0d1ad0d net: af_packet: fix race in PACKET_{R|T}X_RING
bf79e2f net: fix deadlock while clearing neighbor proxy table
4635fdb sctp: do not check port in sctp_inet6_cmp_addr
2e73a25 tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets
fa359f2 soreuseport: initialise timewait reuseport field
615617b net: fix uninit-value in __hw_addr_add_ex()
42ea6d5 net: initialize skb->peeked when cloning
36f5810 netlink: fix uninit-value in netlink_sendmsg
5013a3f ip6_tunnel: better validate user provided tunnel names
af3e28f ip6_gre: better validate user provided tunnel names
96a1336 ipv6: sit: better validate user provided tunnel names
faf13b5 ip_tunnel: better validate user provided tunnel names
4c581b4 irda: Only insert new objects into the global database via setsockopt
b7c06c4 irda: Fix memory leak caused by repeated binds of irda socket
2fdb65d net: fix possible out-of-bound read in skb_network_protocol()
4a7bdd1 netlink: make sure nladdr has correct size in netlink_connect()
ec27095 net: Fix permission check in netlink_connect()
70b4274 skbuff: Fix not waking applications when errors are enqueued
b091b5d l2tp: do not accept arbitrary sockets
9dde3a3 l2tp: remove l2tp_tunnel_count and l2tp_session_count
1103c6c netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt
aaccf63 netfilter: IDLETIMER: be syzkaller friendly
b314c6a cfg80211: fix station info handling bugs
641122b sctp: verify size of a new chunk in _sctp_make_chunk()
85cf25a netfilter: nat: cope with negative port range
17f00bf netfilter: x_tables: fix missing timer initialization in xt_LED
9677809 netfilter: on sockopt() acquire sock lock only in the required scope
3fcb2b3 sctp: do not allow the v4 socket to bind a v4mapped v6 address
90b4811 net/sctp: Always set scope_id in sctp_inet6_skb_msgname
a9ad1a6 ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_header
5b2ce18 usb: dwc3: gadget: set PCM1 field of isochronous-first TRBs
4fdc3bb usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()
821ed32 usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()
dba13bd usb: dwc3: gadget: Prevent losing events in event cache
90ec298 usb: dwc3: gadget: Set maxpacket size for ep0 IN
3e692b6 USB: handle NULL config in usb_find_alt_setting()
fee4fca USB: fix error handling in usb_driver_claim_interface()
3aa82eb USB: remove LPM management from usb_driver_claim_interface()
132d752 USB: leave LPM alone if possible when binding/unbinding interface drivers
d636fd1 usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
874cb25 usb: Don't die twice if PCI xhci host is not responding in resume
9a5b03d usb: core: handle hub C_PORT_OVER_CURRENT condition
1241701 usb: gadget: u_audio: update hw_ptr in iso_complete after data copied
21c4ca1 usb: gadget: function: printer: avoid wrong list handling in printer_write()
a347abf usb: gadget: function: printer: avoid spinlock recursion
8d4eb42 usb: do not reset if a low-speed or full-speed device timed out
54686b2 USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
12dea8c usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
ac1d207 BACKPORT: crypto: msm: Fix buffer overflow issue
1db06cf ASoC: msm: qdsp6v2: ignore VOID return value
bd12901 fs/pstore: fix compilation warning
386c8fc BACKPORT:  Driver core: wakeup the parent device before trying probe
112012a driver core: Make probe deferral more quiet
e08e880 driver core: Remove kerneldoc from local function
52c4da5 driver core: Inline dev_set/get_drvdata
d42e63c driver core: dev_set_drvdata returns void
a2edeb8 driver core: Move driver_data back to struct device

   * manifest/
b5939fa manifest: Sync BlissUpdater

   * packages/apps/BlissUpdater/
76778a9 BlissUpdater!
09a5adc Remove README

   * vendor/bliss/
1fd97f5 packages: Add BlissUpdater
f814ada vendor/bliss: Add separate init for BlissUpdater

====================
     03-26-2019
====================


   * device/moto/shamu/
049f789 shamu: Remove Wifi Display options

   * kernel/moto/shamu/
0c06f7a cma: Call dma_contiguous_early_fixup after allocation
c52ffd8 cma: Drop alignment requirements for regions not in system
8653cbf cma: Delay non-placed memblocks until after all allocations
6ddb853 msm: kgsl: Improve the CFF memory dump functions
c025612 msm: kgsl: Read the memory max stats properly
a6c5c88 Revert "msm: kgsl: Add missing check for alloc size"
9fe8a57 msm: kgsl: Avoid a possible NULL reference in kgsl_ioctl_helper

   * packages/apps/BlissUpdater/
5f01010 BlissUpdater: Cleanup Unused stuff
a62d9fa BlissUpdater: Disable Bliss Version Checks

   * vendor/bliss/
cc4484b prebuilt/etc: Create an additional Bliss OTA Package directory /data/

====================
     03-25-2019
====================


   * kernel/moto/shamu/
39f220e BACKPORT: tty: Use unbound workqueue for all input workers
f2876a4 path_openat(): fix double fput()
4dfb576 cpufreq_stats: Fix stats leak during update policy
87f7a8b Revert "kernel: initialize and free cpufreq stats properly"

   * packages/apps/BlissUpdater/
18950b7 BlissUpdater: Refactor some leftovers

   * packages/apps/Settings/
bc37ea2 Settings: Add BlissUpdater

   * prebuilts/clang/host/linux-x86/
191fb7a Update prebuilt Clang to r353983.
XDA:DevDB Information
[ROM][OFFICIAL] Bliss ROMS v11.8 - Shamu [Pie][4.8.19], ROM for the Nexus 6

Contributors
aclegg2011, rwaterspf1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x

Version Information
Status: Stable

Created 2018-10-27
Last Updated 2019-04-08
Attached Thumbnails
Click image for larger version

Name:	Screenshot_20181027-131533.png
Views:	9788
Size:	163.7 KB
ID:	4628537   Click image for larger version

Name:	Screenshot_20181027-131546.jpg
Views:	9828
Size:	249.7 KB
ID:	4628538   Click image for larger version

Name:	Screenshot_20181027-131607.png
Views:	9666
Size:	146.6 KB
ID:	4628539   Click image for larger version

Name:	Screenshot_20181027-131622.png
Views:	9580
Size:	157.9 KB
ID:	4628540  
The Following 48 Users Say Thank You to aclegg2011 For This Useful Post: [ View ] Gift aclegg2011 Ad-Free
 
 
27th October 2018, 09:09 PM |#2  
aclegg2011's Avatar
OP Senior Member
Thanks Meter: 324
 
More
Device Status:
Code:
================================
 Team Bliss Presents Shamu (n6)
================================

Audio: Working
Bluetooth: Working
Booting: Working
Camera: Working
GPS: Working
Hotspot: ???
LED: Working
NFC: No
RIL: Working
Selinux: Permissive (for now)
WIFI: Working
VoLTE: no
Video recording: Working
The Following 11 Users Say Thank You to aclegg2011 For This Useful Post: [ View ] Gift aclegg2011 Ad-Free
27th October 2018, 09:09 PM |#3  
aclegg2011's Avatar
OP Senior Member
Thanks Meter: 324
 
More
Attention
If for some reason you setup gmail and you already have an account set but don't see it on inital install. Go to apps -> gmail -> and tap on permissions and give gmail access to calendar, contacts, and storage.

If you need help with magsk refer to this post https://forum.xda-developers.com/sho...&postcount=264
I don't really use root on my phone, but I can confirm that you can play pokemon go on stock. :p
The Following 11 Users Say Thank You to aclegg2011 For This Useful Post: [ View ] Gift aclegg2011 Ad-Free
27th October 2018, 09:45 PM |#4  
Senior Member
Flag Dayton
Thanks Meter: 242
 
More
Wow Nice Thanks
The Following User Says Thank You to bigmarv31 For This Useful Post: [ View ] Gift bigmarv31 Ad-Free
27th October 2018, 09:45 PM |#5  
clauss2004's Avatar
Member
Thanks Meter: 18
 
More
Glad to see our dear shamu is kept alive. Thank you sir.
The Following User Says Thank You to clauss2004 For This Useful Post: [ View ] Gift clauss2004 Ad-Free
27th October 2018, 10:06 PM |#6  
mahir555's Avatar
Senior Member
Thanks Meter: 138
 
More
Thanks for your hard work. Hope to see it in a solid build soon after this beta .

Downloading now…
The Following User Says Thank You to mahir555 For This Useful Post: [ View ] Gift mahir555 Ad-Free
28th October 2018, 12:40 AM |#7  
Senior Member
Thanks Meter: 151
 
More
What a pleasant surprise. Downloading. Thank you.
The Following User Says Thank You to maksimreder For This Useful Post: [ View ] Gift maksimreder Ad-Free
28th October 2018, 02:50 AM |#8  
Senior Member
Flag Boise
Thanks Meter: 109
 
More
Could someone take screenshots of the customization settings available, if any?
The Following User Says Thank You to DerrickTight For This Useful Post: [ View ] Gift DerrickTight Ad-Free
28th October 2018, 04:08 AM |#9  
Rushing's Avatar
Senior Member
Flag Los Angeles
Thanks Meter: 2,960
 
Donate to Me
More
Angry
Super cool, & Thanks
The Following User Says Thank You to Rushing For This Useful Post: [ View ] Gift Rushing Ad-Free
28th October 2018, 04:09 AM |#10  
Senior Member
Thanks Meter: 151
 
More
Solid build, have no bugs to report. Kudos all around. By far the best, stable, well rounded release. Very pleased. Thank you Bliss Team.
The Following 4 Users Say Thank You to maksimreder For This Useful Post: [ View ] Gift maksimreder Ad-Free
28th October 2018, 04:12 AM |#11  
Senior Member
Thanks Meter: 151
 
More
Quote:
Originally Posted by DerrickTight

Could someone take screenshots of the customization settings available, if any?

Here ya go,
Attached Thumbnails
Click image for larger version

Name:	Screenshot_20181027-201031.png
Views:	5490
Size:	146.0 KB
ID:	4628687   Click image for larger version

Name:	Screenshot_20181027-201037.png
Views:	5456
Size:	117.8 KB
ID:	4628688   Click image for larger version

Name:	Screenshot_20181027-201042.png
Views:	5408
Size:	93.3 KB
ID:	4628689   Click image for larger version

Name:	Screenshot_20181027-201046.png
Views:	5250
Size:	93.4 KB
ID:	4628690   Click image for larger version

Name:	Screenshot_20181027-201052.png
Views:	5140
Size:	105.2 KB
ID:	4628691   Click image for larger version

Name:	Screenshot_20181027-201058.png
Views:	5066
Size:	117.7 KB
ID:	4628692   Click image for larger version

Name:	Screenshot_20181027-201103.png
Views:	4960
Size:	151.1 KB
ID:	4628693   Click image for larger version

Name:	Screenshot_20181027-201108.png
Views:	4942
Size:	167.9 KB
ID:	4628694  
The Following 6 Users Say Thank You to maksimreder For This Useful Post: [ View ] Gift maksimreder Ad-Free
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes