FORUMS

[ROM][angler][10.0.0_r33] AOSP 10.0 [2020/04/15]

613 posts
Thanks Meter: 2,534
 
By PixelBoot, Recognized Developer on 15th April 2020, 01:24 PM
Post Reply Email Thread

Code:
/*
 * Your warranty is now void.
 * 
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

What's AOSP?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.

What's Working:
  • RIL (Calls, SMS, Data)
  • Fingerprint
  • Wi-Fi
  • Bluetooth
  • Camera
  • Camcorder
  • Video Playback
  • Audio
  • Sensors
  • Flash
  • LED
  • GPS

Important Info:
To flash this rom you need TWRP 3.3.1.0 or newer.

Make sure you have the vendor, radio, & bootloader img's installed, from the stock oreo 8.1 OPM7.181205.001 Dec 2018 factory image.
They can be extracted from the factory image on google's site here. Or you can use the ones linked below that I already extracted:
vendor, radio, bootloader img's: https://androidfilehost.com/?w=files&flid=286833
The vendor img is flashable with twrp or fastboot. For the radio and bootloader img, use fastboot.

Instructions:
If updating from a previous AOSP-10 build, follow the steps below:
  1. If you don't already have them installed, flash the newest vendor, radio, and bootloader img's linked above.
  2. Boot into TWRP.
  3. Flash the ROM zip.
  4. Reboot & enjoy.

Note: if you previously flashed gapps and/or the su addon, there's no need to flash them again. They will be automatically re-installed during rom zip installation.

If coming from a different ROM:
  1. If you don't already have them installed, flash the newest vendor, radio, and bootloader img's linked above. also make sure you have the newest twrp, linked above.
  2. Boot into TWRP.
  3. Wipe system & data & cache partitions.
  4. Format data.
  5. Flash rom & GApps & su zips (GApps & su zips are optional).
  6. Reboot & enjoy.

Note:
If your phone suffers from the bootloop issue, download the BLOD patch and install it via TWRP (4 Core) after flashing the ROM .

Downloads:
XDA:DevDB Information
AOSP 10.0.0, ROM for the Huawei Nexus 6P

Contributors
PixelBoot
Source Code: https://android.googlesource.com/

ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Based On: AOSP

Version Information
Status: Testing

Created 2020-04-15
Last Updated 2020-04-17
The Following 10 Users Say Thank You to PixelBoot For This Useful Post: [ View ]
15th April 2020, 01:24 PM |#2  
Install Instructions
  • Grab our recovery from the OP Post section and install it.
    Through TWRP Recovery:
    Install Zip > Install Image > Choose ‘recovery.img‘ > Select partition ‘Recovery’ > Swipe to confirm flash
    Through Fastboot:
    Code:
    fastboot flash recovery recovery.img
  • Install the ROM and then wipe your internal data partition.
    Through TWRP Recovery:
    Wipe > Format data
    Through Fastboot:
    Code:
    fastboot -w
  • Reboot into system and wait until the process finishes, it could take a little bit. After the installation is done, I suggest waiting before using the phone because it usually goes into thermal throttling after installing a ROM.
The Following 4 Users Say Thank You to PixelBoot For This Useful Post: [ View ]
15th April 2020, 01:24 PM |#3  
Changelog
AOSP-10.0 20200412
  • Initial AOSP 10 Build
The Following 8 Users Say Thank You to PixelBoot For This Useful Post: [ View ]
15th April 2020, 01:56 PM |#4  
mataflakitas's Avatar
Senior Member
Flag nuevo leon
Thanks Meter: 846
 
More
Omg .. Pixelboot is amazong 😍😍😍
15th April 2020, 05:03 PM |#5  
Senior Member
Flag ::1
Thanks Meter: 66
 
More
Both build folders seems empty right now...
15th April 2020, 08:15 PM |#6  
Quote:
Originally Posted by daigoro64

Both build folders seems empty right now...

Check again. They should be back.
15th April 2020, 09:39 PM |#7  
Senior Member
Flag ::1
Thanks Meter: 66
 
More
Quote:
Originally Posted by PixelBoot

Check again. They should be back.

Google Drive is fine. Thanks!
16th April 2020, 03:14 AM |#8  
Junior Member
Thanks Meter: 0
 
More
Probably a noob question, but how do I know if I have the bootloader, vendor and radio installed? And if they're installed (which I don't know) and I flash the ones linked above, would it cause any issues to my phone?

New here btw, thank you very much!
16th April 2020, 07:03 AM |#9  
Senior Member
Thanks Meter: 38
 
More
Quote:
Originally Posted by Rodeze

Probably a noob question, but how do I know if I have the bootloader, vendor and radio installed? And if they're installed (which I don't know) and I flash the ones linked above, would it cause any issues to my phone?

New here btw, thank you very much!

It will not cause any issues
16th April 2020, 07:26 AM |#10  
Senior Member
Flag ::1
Thanks Meter: 66
 
More
Quote:
Originally Posted by Rodeze

Probably a noob question, but how do I know if I have the bootloader, vendor and radio installed? And if they're installed (which I don't know) and I flash the ones linked above, would it cause any issues to my phone?

Bootloader and radio are installed for sure by default. You can check their versions starting the device to bootloader.
If there is a Vendor mismatch is show to you as soon as you enter the home.
16th April 2020, 02:48 PM |#11  
nueloc's Avatar
Senior Member
Flag Bucharest
Thanks Meter: 19
 
More
if I am doing a clean install is it necessary to flash Gapps ?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes