FORUMS
Remove All Ads from XDA

 View Poll Results: Was this helpful

Yes
 
74 Vote(s)
91.36%
No
 
7 Vote(s)
8.64%

Galaxy Note 4 Unbrick/Debrick.img for N910G/F/T/W8 [unbrick] [unbrick image]

814 posts
Thanks Meter: 459
 
By yashthemw, Senior Member on 26th October 2016, 05:23 PM
Post Reply Email Thread
First of all,

I would like to thank @Trex888 , for providing the debrick creator .

A special thanks to @dyasten for providing a working method of debricking n910f .

NOTE: DEBRICK IMAGES ARE AVAILABLE FOR N910G/F, IF YOU HAVE N910W8/T, SEE THE REFERENCE SECTION BELOW.
************************************************
Read this before proceeding any further.
>Please mention your model number while posting a query.
>Before trying any of these methods, load your note 4 in a bag and put it in the freezer (not kidding, i am serious).
>Keep it for a whole night, before removing it from freezer, these things should be ready:
Recovery firmware or stock rom loaded in odin, with every file in its respective slot, if you are using the recovery firmware, then uncheck auto reboot and tick f.reset time, repartition in odin's option tab.
My advice is, try to flash the stock rom first, if it doesnt works, then go for recovery firmware.

>Once you remove it from freezer, without any delay, connect it to pc and flash the firmware.


DEBRICKS:


This is the procedure:
-Open win32diskimager, load the debrick.img(3.74gb for n910f and 16mb for n910g).
[B] -Flash it on a blank sd card, the card should be completely formatted and should be in fat32 format.
[/B ]-Once done, put that sd card in your bricked device.
-Connect it to your pc.
-Hold the power button for at least 10 sec or try the download mode key trio.
-It should vibrate.
-If it doesnt, hold it in front of an air conditioner,
let it cool( this has been tested).
-If it still doesnt vibrates, remove the battery, hold the power button for 10sec and then insert the battery.
-Now again try to press power button.
>So, once it vibrates, leave it for around 5min.
-Then press the volume down key+power+home.
-It should boot in to download mode.
-Now you can flash stock rom or recovery firmware.


RECOVERY FIRMWARES:

The correct way of flashing a recovery firmware:

- Load all the files in their respective slots ( ap, bl, cp, csc, pit ).
- select f.reset time, re-partition and uncheck auto reboot.
- Flash
- If it fails, then try without csc.
-Done
-Your phone will be back to normal.

Incase if any hardware buttons are not working, you can use this tool to get into download mode:
https://mega.nz/#!il9XXS6a!6yXq6uCBY...4Oj3cRnTvNDPao
Turn your phone off, connect it to pc and put it in download mode via that software.

You dont even have to read any further unless you have a different variant of note 4.


If the device still acts weird, then refer this:
https://forum.xda-developers.com/sho...php?p=70971598


Dont forget to press thanks.

************************************************** **
REFERENCE:
If you are in a hurry to debrick your note 4 ,then go to these link, without reading any further, but don't forget to press thanks button :

■N910F:
http://forum.xda-developers.com/show...php?p=69489251
Or else:
People with bricked N910F can refer this page :
pastebin (dot) com/7KQxRRNF ,
just replace "(dot)" with " . "


■N910G users can try this :
http://forum.xda-developers.com/show...php?p=70006957

■N910W8:
https://mega.nz/#!TM8FUKrL!2tX2hrk3O...6AHRlPPqGgtcPU ( by @Valentinez).

■For N910P refer this thread:
http://forum.xda-developers.com/show....php?t=3525923

■For n910t:
https://mega.nz/#!XRE1DbRL!uRcj8knB4...TYJC_DxNoyXkAA


Follow these steps for unbricking your device:
http://forum.xda-developers.com/show...php?p=69481229
************************************************


Here are qualcomm drivers , install them on pc :
https://mega.nz/#!4lNliRYJ!3blyZgKug...2UjUIckEFhMRks



************************************************
METHOD TO CREATE A DEBRICK VIA ODIN:
>PREREQUISITES:
-APQ 8084.pit file ( get it from here: https://mega.nz/#F!GscxXTgL!vBFl9ovSxsHM3xNo2jK40w)
-a Bootloader of your device(use the one from your recovery firmware)
-Any Samsung device having download mode.
-A SDHC CLASS 10 micro SD card(4gb, 16gb), it should blank and in FAT32 format.
- ODIN.
>PROCEDURE:
-Load the APQ 8084.pit file in the PIT section of ODIN.
-Load the Bootloader file in BL section of ODIN.
-In the options tab select: Auto Reboot, Re-Partition, F.Reset Time and T flash.
- Insert the blank sd card in a Samsung device and put the phone in Download mode.
-Connect the device to PC.
-Press START in ODIN.
That's it, you have your own debrick sd card, now you just have to insert it in your bricked device




************************************************

Reportedly , working on N910G and N910F.


Trex888 has already created a Debrick.img for n910t , hope all the other variants also get it.
Thanks to @Kurisoft , for sharing information about creating a debrick.img.


Don't forget to Press thanks .

Paypal ID: https://www.paypal.me/yashthemw
Reporting Via N910G
The Following 96 Users Say Thank You to yashthemw For This Useful Post: [ View ] Gift yashthemw Ad-Free
 
 
26th October 2016, 05:39 PM |#2  
Senior Member
Flag Dubai
Thanks Meter: 1,076
 
More
Check pm
Quote:
Originally Posted by yashthemw

First of all, I would like to thanks @Trex888 , for providing the debrick creator .

Note : If you want the debrick img , then you will have to make one for yourself.
I will be doing it for n910g , it will take some time, cause i will need a spare note 4 .
Anyways , if you want , create it and share .

Procedure :
So basically , you have to flash this zip file in recovery :
https://mega.nz/#!fJlWwawA!tsRI-0DMF...iLzS6l1eZcJzxM

As stated by trex888 , this will create a file named Debrick.img in your internal storage .
Then you will have to put that debrick.img file on a sd-card(it should SDHC and I would advice a 32gb card ).

This can be done through PC , by using win32diskimager .
You can download win32diskimager from here :

http://forum.xda-developers.com/atta...7&d=1393277797 )

Before putting this file on sd-card , make sure that it is formatted.
Once you got the file on your sd-card , just insert it into your costly paper weight (bricked note 4) .

Try to enter the download mode with the three key combination, if it doesnt enters the download mode, try all the possible key combinations .
Hope it helps .


Trex888 has already created a Debrick.img for n910t , hope all the other variants also get it.
Thanks to @Kurisoft , for sharing this information .

Reporting Via N910G

Check pm
The Following 3 Users Say Thank You to Trex888 For This Useful Post: [ View ] Gift Trex888 Ad-Free
27th October 2016, 09:28 AM |#3  
yashthemw's Avatar
OP Senior Member
Flag Mumbai
Thanks Meter: 459
 
More
Debrick.img for n910g and n910f created .
I dont have a bricked note 4 , therefore someone with a bricked device will have to try.
I have created it for g and f , with my functional note 4 , so please press thanks.

Reporting Via N910G
The Following 15 Users Say Thank You to yashthemw For This Useful Post: [ View ] Gift yashthemw Ad-Free
27th October 2016, 09:49 AM |#4  
Senior Member
Thanks Meter: 88
 
More
Great
27th October 2016, 10:51 AM |#5  
yashthemw's Avatar
OP Senior Member
Flag Mumbai
Thanks Meter: 459
 
More
N910f users , please report

Reporting Via N910G
The Following 3 Users Say Thank You to yashthemw For This Useful Post: [ View ] Gift yashthemw Ad-Free
27th October 2016, 10:54 AM |#6  
Senior Member
Thanks Meter: 301
 
More
Can i flash this file for Note4 N9100 dual sim ?
27th October 2016, 11:33 AM |#7  
yashthemw's Avatar
OP Senior Member
Flag Mumbai
Thanks Meter: 459
 
More
Quote:
Originally Posted by hochocnua

Can i flash this file for Note4 N9100 dual sim ?

No , ask some n9100 user with a functional n9100 to create a debrick.img.

Reporting Via N910G
The Following 2 Users Say Thank You to yashthemw For This Useful Post: [ View ] Gift yashthemw Ad-Free
27th October 2016, 11:36 AM |#8  
Senior Member
Thanks Meter: 301
 
More
Quote:
Originally Posted by yashthemw

No , ask some n9100 user with a functional n9100 to create a debrick.img.

Reporting Via N910G

I mean flash tool with TWRP
https://mega.nz/#!bBU1RDwB!tsRI-0DMF...iLzS6l1eZcJzxM
And it creative the img file for N9100 of me ?
27th October 2016, 11:39 AM |#9  
yashthemw's Avatar
OP Senior Member
Flag Mumbai
Thanks Meter: 459
 
More
Quote:
Originally Posted by hochocnua

I mean flash tool with TWRP
https://mega.nz/#!bBU1RDwB!tsRI-0DMF...iLzS6l1eZcJzxM
And it creative the img file for N9100 of me ?

Yes , for all n9100.

Reporting Via N910G
The Following 2 Users Say Thank You to yashthemw For This Useful Post: [ View ] Gift yashthemw Ad-Free
27th October 2016, 05:01 PM |#10  
Senior Member
Thanks Meter: 19
 
More
Question. When I create a Debrick.img I must first stock Fimware Flashen or does it go during Costom Rom?
27th October 2016, 05:53 PM |#11  
yashthemw's Avatar
OP Senior Member
Flag Mumbai
Thanks Meter: 459
 
More
Quote:
Originally Posted by rakieta

Question. When I create a Debrick.img I must first stock Fimware Flashen or does it go during Costom Rom?

If you want to create a debrick.img , then you have to be on a stock rooted firmware .
But why are you making one more ,
I have already made one .
Try it and report here.

Sent from my SM-N910G using Tapatalk
Post Reply Subscribe to Thread

Tags
dead note 4, debrick note 4, emmc failure, fix note 4, unbrick note 4

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes