FORUMS

[ROM][9.0.0][trlte] Resurrection Remix 7.0.2 [20190920][OFFICIAL]

430 posts
Thanks Meter: 2,086
 
By mobspyguy, Senior Member on 11th February 2019, 02:51 PM
Post Reply Email Thread

rrlogo
Resurrection Remix P

Code:
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */


rrabout

Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.

Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy! Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.


Kernel Features

  • Based on 3.18.110
  • LZ4 Compressed Kernel
  • Governor: intellimm, lionfish, blue_active, interactive_pro, conservativex, alucard, nightmare, ondemandplus, yankactive, dancedance, intelliactive, interactive (default), zzmove, conservative, ondemand, userspace, powersave, bioshock, lionheart, performance.
  • CPU Hotplug: MPDecision (default), Intelliplug, MSM Hotplug, AutoSMP
  • I/O Scheduler: row, cfq, deadline, noop, test-iosched
  • Virtual memory: UKSM (default disabled), ZRAM
  • Ext4/F2FS Support
  • Boeffla wakelocker
  • UKSM optimization
  • ZRAM optimization (LZ4 compressed)
  • KCAL color control
  • Ardeno idler (default disabled)
  • CPU Voltage Control
  • Powersuspend Settings
  • TCP congestion algorithm : bic, cubic, reno, westwood, htcp
  • General Performance & Battery life optimizations
  • and more you can find on my GitHub in commits


rrinstall
  1. Download your RROS Rom and GApps Package,
  2. Move your RROS Rom and GApps Package to the external MicroSD storage,
  3. Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibration),
  4. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache,
  5. Swipe to Wipe at Bottom of Screen,
  6. Back to Main start screen,
  7. Wipe > Format Data,
  8. Type 'Yes' and press blue checkmark at the bottom-right corner,
  9. Go Back to Main Start Screen to Install Rom and GApps,
  10. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
  11. Reboot System! Enjoy!

Update Instructions
  • Download the new build
  • Flash ROM
  • Flash Gapps
  • Wipe dalvik cache
  • Wipe cache
  • Reboot
  • Enjoy!


rrdownload

Rom Download
Mirror 1 (only until R9)
Mirror 2
Mirror 3

GApps Download
Opengapps pico

Bootloader/Modem
alexndr
ripee

TWRP
TWRP for N910F (trltexx)
TWRP Thread for N910F (trltexx)

Magisk
Magisk Stable


rrsource

Resurrection Remix Source
Device Sources

rrthanks


XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users



rrbugs


If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.

Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.


rrsocial




Donation

Like my work? Support further development!



What work? (tested on Note 4, Variant F [trltexx])
  • Phone/Mobile Data
  • Wifi
  • Bluetooth
  • Camera (Photo/Video)
  • Fingerprint
  • IR Blaster

Confirmed reported Bugs
  • App glitches and icon flickering on statusbar
  • no connection to hidden SSID (No issue, Pie property)
  • System UI:
    Tapping settings > system > gestures crashes settings for me which is fixed by clearing it from recent's
    In Resurrection tools > buttons > hardware keys there is no option to confirm duration of back light and so can't be changed from 5 seconds

XDA:DevDB Information
Rom Resurrection Remix 7.0.2, ROM for the Samsung Galaxy Note 4

Contributors
mobspyguy
Source Code: https://github.com/ResurrectionRemix

ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: LineageOS, AOSP

Version Information
Status: Stable
Current Stable Version: 7.0.2
First Beta Release Date: 2019-02-11
Stable Release Date: 2019-09-20

Created 2019-02-11
Last Updated 2019-09-20
Attached Thumbnails
Click image for larger version

Name:	Screenshot_20190206-043740_Trebuchet.jpg
Views:	33174
Size:	126.0 KB
ID:	4703614   Click image for larger version

Name:	Screenshot_20190206-043749_Trebuchet.png
Views:	34654
Size:	187.2 KB
ID:	4703616   Click image for larger version

Name:	Screenshot_20190206-043757_Trebuchet.png
Views:	34146
Size:	142.0 KB
ID:	4703617   Click image for larger version

Name:	Screenshot_20190206-043817_Trebuchet.jpg
Views:	34412
Size:	162.7 KB
ID:	4703619   Click image for larger version

Name:	Screenshot_20190206-043810_Settings.png
Views:	33812
Size:	183.3 KB
ID:	4703620   Click image for larger version

Name:	Screenshot_20190206-043853_Settings.png
Views:	33376
Size:	120.2 KB
ID:	4703621   Click image for larger version

Name:	Screenshot_20190206-043900_Settings.png
Views:	31542
Size:	103.1 KB
ID:	4703622   Click image for larger version

Name:	Screenshot_20190206-043917_Settings.png
Views:	30784
Size:	214.2 KB
ID:	4703623   Click image for larger version

Name:	Screenshot_20190206-043922_Settings.png
Views:	30152
Size:	136.7 KB
ID:	4703624   Click image for larger version

Name:	Screenshot_20190206-043934_Settings.png
Views:	29268
Size:	163.8 KB
ID:	4703629   Click image for larger version

Name:	Screenshot_20190206-043938_Settings.png
Views:	28060
Size:	123.5 KB
ID:	4703630   Click image for larger version

Name:	Screenshot_20190206-043941_Settings.png
Views:	27224
Size:	182.9 KB
ID:	4703631   Click image for larger version

Name:	Screenshot_20190206-043949_Settings.png
Views:	26284
Size:	184.3 KB
ID:	4703634   Click image for larger version

Name:	Screenshot_20190206-044003_Settings.png
Views:	25656
Size:	178.7 KB
ID:	4703637   Click image for larger version

Name:	Screenshot_20190206-044009_Settings.png
Views:	25788
Size:	187.4 KB
ID:	4703638  
The Following 93 Users Say Thank You to mobspyguy For This Useful Post: [ View ] Gift mobspyguy Ad-Free
11th February 2019, 02:51 PM |#2  
mobspyguy's Avatar
OP Senior Member
Thanks Meter: 2,086
 
Donate to Me
More
FAQ
Q: Why I get this error, when registering a new additional fingerprint (mostly after dirty flash a rom) and resolve it?

Fingerprint recording

A:

The main problem is the communication between Samsung's own Trustlet libraries, the fingerprint hardware and AOSPs interfaces for communication with each other and the AOSP GUI for fingerprint recording, lock screen authentication and so on. Fingerprints are stored encrypted in a trust zone and SQL database file. Suppose you have registered 3 fingerprints and a new version dirty flashed. In most cases, fingerprints will not work after booting. You delete your previous fingerprints in the settings, unfortunately they often remain in the sql file. (This will later give the Settings GUI [to register fingerprints] incorrect informations about the number of registred fingerprints). Now register again two fingers with the fingerprint scanner which works without problems. If you try to record a fingerprint again, you will get the above error message.

Solution (root assumed):
  1. delete all fingerprints under Settings > Security & location > Fingerprint
  2. open file editor and change to directory /data/validity
  3. rename /template.db to /template.db.bak or delete file
  4. boot your phone, a new clean template.db file will be created automatically
  5. five new fingerprints can now be registered without errors

Note: If you now want to delete fingerprints again, you should always start in reverse order or error occurs again.
Main rule: If you use fingerprints, always flash clean a new rom.


Q: What are CPU Governors, CPU Hotplug and other kernel variables?
A:

Q: How to install Magisk?
A:
  1. Download Magisk Stable Beta and Magisk Manager
  2. Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibration),
  3. Go to "Install" and select previous downloaded Magisk zip
  4. After you have finished installing Magisk > Wipe Cache/Dalvik > Swipe to Wipe
  5. Reboot system
  6. If no Magisk manager icon exisits, install previous downloaded Magisk Manager APK
  7. Reboot again, Enjoy root
The Following 35 Users Say Thank You to mobspyguy For This Useful Post: [ View ] Gift mobspyguy Ad-Free
11th February 2019, 02:51 PM |#3  
mobspyguy's Avatar
OP Senior Member
Thanks Meter: 2,086
 
Donate to Me
More
Changelog
RROS PIE R10
Kernel updates:
  • merge some improvments from LineageOS
  • enable CONFIG_IP_NF_TARGET_TTL (user request: @TheIgloo)

Rom updates:
  • update security patch (09/19)



RROS PIE R9
Kernel updates:
  • merge some Bluetooth improvments from LineageOS

Rom updates:
  • update LineageOS sources (r46)
  • update security patch (08/19)

RROS PIE R8
Kernel updates:
  • none

Rom updates:
  • update LineageOS sources (r44)
  • update security patch (07/19)

RROS PIE R7
Kernel updates:
  • update to latest LOS sources
  • include ARM optimized UKSM (Ultra Kernel Samepage Merging)

Rom updates:
  • missing files added (fix lastest bluetooth issue)
  • add some rules to sepolicy to fix some denials

RROS PIE R6

Rom updates:
  • update LineageOS sources (r40)
  • improve camera, gps and livedisplay
  • add wake on home button on/off functionality (default by Lineage, but RR Main-Members forget to include)
  • update security patch (06/19)

RROS PIE R5
Kernel updates:
  • add KCAL support
  • boeffla_wl_blocker: add generic wakelock blocker driver v1.1.0
  • add CPU-Governor intellimm, zzmove, bioshock, lionfish
  • add UKSM (Ultra Kernel Samepage Merging)

Rom updates:
  • update LineageOS sources (r37)
  • update security patch (05/19)
  • add some new QsTileStyles
  • compiled with UBERTC 4.9

RROS PIE R4
Kernel updates:
  • Fix battery charging issue
  • add Adreno Idler (Uses a different calculation method on top of Adreno TZ just for calculating frequency for idle to reduce the wasted power coming from stock Adreno TZ while maintaining high-performance.)
  • add CPU-Governor "blu_active" (using the 'blu_active' governor for latency-sensitive workloads)
  • add Hotplug "IntelliPlug V4.0" and "MSM Hotplug"

Hint: Many new settings can taken into KernelAdiutor
Personal hint: Since some days I test cpu governor blu_active with IntelliPlug Hotplug. Seems to be really battery friendly.

Rom updates:
  • update RROS to V7.0.2 sources


RROS PIE R3
  • update Kernel sources
  • update LineageOS sources (r35)
  • update security patch (04/19)

RROS PIE R2
  • fix glitches and flickering
  • adjust fingerprint recording (now record of fingerprint works without second quick swiping at last finger swipe)
  • optimize fingerprint phone unlock (at my device [N910F] fingerprint phone unlock works since 3 days without known isssue)
  • update LineageOS sources (r34)
  • update RROS to V7.0.1 sources
  • different small fixes
The Following 33 Users Say Thank You to mobspyguy For This Useful Post: [ View ] Gift mobspyguy Ad-Free
11th February 2019, 04:59 PM |#4  
Member
Flag TIRANA, AL
Thanks Meter: 28
 
More
Thank you man 🙏👊
I can't believe that you made it possible to run pie on our amazing device
I will download it and report eventual bugs.
You're awesome man
The Following 6 Users Say Thank You to alanifotis For This Useful Post: [ View ] Gift alanifotis Ad-Free
11th February 2019, 05:01 PM |#5  
nisi3nt's Avatar
Member
Thanks Meter: 5
 
More
You're the best thank you so much for your hard work
The Following User Says Thank You to nisi3nt For This Useful Post: [ View ] Gift nisi3nt Ad-Free
11th February 2019, 05:21 PM |#6  
Junior Member
Thanks Meter: 0
 
More
Kinda scared to install a ROM from a user named mobile spy guy, lol
11th February 2019, 05:26 PM |#7  
Junior Member
Thanks Meter: 11
 
More
Thank you for the pie sir..
The Following 2 Users Say Thank You to WokMan Noodles For This Useful Post: [ View ] Gift WokMan Noodles Ad-Free
11th February 2019, 06:50 PM |#8  
mobspyguy's Avatar
OP Senior Member
Thanks Meter: 2,086
 
Donate to Me
More
Quote:
Originally Posted by yofish44

Kinda scared to install a ROM from a user named mobile spy guy, lol

I can guarantee you, there is no mobile spy guy ware in this Rom!
The Following 7 Users Say Thank You to mobspyguy For This Useful Post: [ View ] Gift mobspyguy Ad-Free
11th February 2019, 07:48 PM |#9  
Junior Member
Thanks Meter: 8
 
More
Quote:
Originally Posted by mobspyguy

I can guarantee you, there is no mobile spy guy ware in this Rom!

Thank you man! Thank you for making PIE possible for us!!!
The Following 2 Users Say Thank You to anthodenn For This Useful Post: [ View ] Gift anthodenn Ad-Free
11th February 2019, 09:07 PM |#10  
Senior Member
Thanks Meter: 71
 
More
hi, I just did a clean install of this and magisk or super su isn't working & I can't update the binary on an old vs of super su.....I have no Idea why magisk's not working....I need root access
11th February 2019, 09:24 PM |#11  
clod22's Avatar
Senior Member
Flag Bucharest
Thanks Meter: 186
 
More
Thank for your hard work!!!
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes