CyanOxy OS for Oneplus 2
PLEASE READ ALL THE THREE POSTS BEFORE YOU FLASH THIS
CyanOxy OS is a unique combination of Cyanogenmod and Cyanogen OS apps with an Oxygen OS base which enhances speed, utility and aesthetics. Optimized for stability and fluidity, it provides a smoother and richer experience than stock OOS. The CM apps only make it better providing enhanced functionality. I built this ROM primarily for my own use, since I love the Cyanogenmod apps but I always end up going back to Oxygen after a few weeks of staying on CM.
Features:
-Based on the latest Oxygen OS
-Fully debloated (list of removed apps are in post 3)
-Pre rooted and busybox installed
-Deodexed
-Zipaligned
-Viper4Android (thanks to ViPER520)
-No need to flash Gapps, the important ones are pre-installed
-Fully functional Trebuchet launcher
-DPI set to 360
-Build.prop tweaks for better battery life, performance and networking.
-Fully debloated (list of removed apps are in post 3)
-Pre rooted and busybox installed
-Deodexed
-Zipaligned
-Viper4Android (thanks to ViPER520)
-No need to flash Gapps, the important ones are pre-installed
-Fully functional Trebuchet launcher
-DPI set to 360
-Build.prop tweaks for better battery life, performance and networking.
Cyanogenmod and Cyanogen OS apps:
-File Manager
-Trebuchet
-Browser
-Music Player
-LockClock
-Boxer Email
-Boxer Calendar
-Screencast
-Sound Recorder
-CM Gallery
-Trebuchet
-Browser
-Music Player
-LockClock
-Boxer Email
-Boxer Calendar
-Screencast
-Sound Recorder
-CM Gallery
Installation instructions FOR V1.0
-Wipe system, data, cache and dalvik using TWRP
-Flash the OOS 2.2.1 Stock ROM zip, followed by CyanOxy OS v1.0
-Reboot
-Do NOT select Swiftkey during the set up (since I've removed the app. You can install it from the play store later.)
-If your installer gets stuck at "Checking connection", go back, reconnect to your WiFi and then continue.
-Flash the OOS 2.2.1 Stock ROM zip, followed by CyanOxy OS v1.0
-Reboot
-Do NOT select Swiftkey during the set up (since I've removed the app. You can install it from the play store later.)
-If your installer gets stuck at "Checking connection", go back, reconnect to your WiFi and then continue.
INSTALLATION FOR V2.0 ONWARDS
FOLLOW THESE INSTRUCTIONS CAREFULLY OR ELSE YOU WILL END UP WITH A SOFT BRICKED DEVICE.
-Wipe data, cache, system, dalvik from TWRP
-Flash stock OOS 3.0 Beta (http://downloads.oneplus.net/2016-03-30/op2/OnePlus_2_OxygenOS_3.0_Beta/). DO NOT REBOOT.
-Flash modified recovery img (https://www.androidfilehost.com/?fid=24459283995297945)
-Reboot into recovery from TWRP
-Wipe data, cache, dalvik AGAIN and then flash stock OOS 3.0 Beta AGAIN
-Flash CyanOxy OS 2.x Beta zip
-Reboot
-Select Trebuchet as default launcher (If you want to use Oneplus Launcher, you will have to delete the trebuchet folder from system/priv-app with the twrp file manager and then reboot.
-Flash stock OOS 3.0 Beta (http://downloads.oneplus.net/2016-03-30/op2/OnePlus_2_OxygenOS_3.0_Beta/). DO NOT REBOOT.
-Flash modified recovery img (https://www.androidfilehost.com/?fid=24459283995297945)
-Reboot into recovery from TWRP
-Wipe data, cache, dalvik AGAIN and then flash stock OOS 3.0 Beta AGAIN
-Flash CyanOxy OS 2.x Beta zip
-Reboot
-Select Trebuchet as default launcher (If you want to use Oneplus Launcher, you will have to delete the trebuchet folder from system/priv-app with the twrp file manager and then reboot.
For v3.0:
1)CyanOxy 2.x users or official CM13 users or similar roms based on the 3.x firmware, first clean flash the stock rom zip followed by CyanOxy 3.0
2)Users of OOS 2.x or older cm and aosp based roms that require the 2.x firmware, follow the steps given above for flashing CyanOxy 0S v2.2 BETA and up. Flash the latest OOS 3.0.2 zip followed by CyanOxy 3.0
The OOS 3.0.2 full rom zip: https://www.androidfilehost.com/?fid=24572388905583156
If you encounter a black screen on first boot, force shut down (keep the power button pressed) and then reboot.
2)Users of OOS 2.x or older cm and aosp based roms that require the 2.x firmware, follow the steps given above for flashing CyanOxy 0S v2.2 BETA and up. Flash the latest OOS 3.0.2 zip followed by CyanOxy 3.0
The OOS 3.0.2 full rom zip: https://www.androidfilehost.com/?fid=24572388905583156
If you encounter a black screen on first boot, force shut down (keep the power button pressed) and then reboot.
If you're coming from v2.x you can dirty flash v2.3.
TO USE V4A, GIVE ROOT PERMISSIONS TO SELINUX CHANGER AND CHANGE IT TO PERMISSIVE. THEN OPEN V4A, INSTALL THE DRIVER, REBOOT. (Thank you @MrBIMC for the SELinuxModeChanger app)
Recommended but not necessary:
(Currently only supports v1 of this ROM)
Flash the latest Boeffla Kernel by @Lord Boeffla (http://xdaforums.com/oneplus-2/orig-development/kernel-boeffla-kernel-05-10-2015-t3218164). You could also use the uber and linaro builds made by @ZaneZam (http://xdaforums.com/oneplus-2/development/kernel-boeffla-kernel-linaro-uber-t3218452)
Flash the latest Boeffla Kernel by @Lord Boeffla (http://xdaforums.com/oneplus-2/orig-development/kernel-boeffla-kernel-05-10-2015-t3218164). You could also use the uber and linaro builds made by @ZaneZam (http://xdaforums.com/oneplus-2/development/kernel-boeffla-kernel-linaro-uber-t3218452)
Changelog:
-v1.0: Initial Release, based on OOS 2.2.1
-v2.0 Beta: Updated to OOS 3.0, removed snapdragon camera
-v2.1 Beta: (Removed due to root issues)
-v2.2 Beta: Replaced GalleryNext with CMGallery, added v4a, more build.prop tweaks, Cyanogen OS bootanimation, removed the annoying screenshot sound, updated Busybox.
-v2.3 Beta: Updated base to OOS 3.0.1, added CyanOxy bootanimation, updated Busybox, increased dpi to 380.
-v3.0: Updated base to latest OOS 3.0.2, stable build.
-v2.0 Beta: Updated to OOS 3.0, removed snapdragon camera
-v2.1 Beta: (Removed due to root issues)
-v2.2 Beta: Replaced GalleryNext with CMGallery, added v4a, more build.prop tweaks, Cyanogen OS bootanimation, removed the annoying screenshot sound, updated Busybox.
-v2.3 Beta: Updated base to OOS 3.0.1, added CyanOxy bootanimation, updated Busybox, increased dpi to 380.
-v3.0: Updated base to latest OOS 3.0.2, stable build.
Downloads:
v1.0 and v2.0
https://mega.nz/#F!D8sDna6K!uV7Nwrp9GqW_hgpHT05j4g
v2.0 Mirror (Thank you @GhostSamuraiX)
https://drive.google.com/file/d/0Byni2xlPHC30UEZfcm83UTc4SEk/view
v2.2 onwards:
https://www.androidfilehost.com/?w=files&flid=53534
https://mega.nz/#F!D8sDna6K!uV7Nwrp9GqW_hgpHT05j4g
v2.0 Mirror (Thank you @GhostSamuraiX)
https://drive.google.com/file/d/0Byni2xlPHC30UEZfcm83UTc4SEk/view
v2.2 onwards:
https://www.androidfilehost.com/?w=files&flid=53534
CyanOxy Telegram group (thank you @GhostSamuraiX)
https://telegram.me/CyanOxy
XDA:DevDB Information
CyanOxy OS, ROM for the OnePlus 2
Contributors
zoroarctic
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2016-06-05
Current Beta Version: 2.3
Beta Release Date: 2016-05-23
Created 2016-03-20
Last Updated 2016-06-06
Last edited: