[KERNEL][OP3] FrancoKernel
- Thread starter franciscofranco
- Start date
- Status
@franciscofranco did you change something with mobile data on the last build? I'm getting 2G everywhere it doesn't automatically switch back have to reselect 4G every time.
This kernel WONT work with f2fs file system (data and cache) . Running freedom 1.7 with f2fs and blue spark kernel without issues since 1 week. searched in this thread if this kernel support it but it WONT cause the rom wont boot. Flashed back bluespark and all is ok.
WiFi not working after upgrading to R5 from R3.
I have R3 +SuperSU SR4 installed. Went to recovery and flashed R5. No WiFi.
Rebooted flashed R5 again, followed by SuperSU, but no luck.
Finally thought to completely remove SuperSU using app, but uninstallation fails every time.
Please help. Thanks
Sent from my ONEPLUS A3003 using Tapatalk
I have R3 +SuperSU SR4 installed. Went to recovery and flashed R5. No WiFi.
Rebooted flashed R5 again, followed by SuperSU, but no luck.
Finally thought to completely remove SuperSU using app, but uninstallation fails every time.
Please help. Thanks
Sent from my ONEPLUS A3003 using Tapatalk
i have the same problem everytime i install this kernel. I use root and xposed on stock 3.2.8 and the only way to get back wifi for me is to reflash the stock image.
Also wiped cache after installing kernel.
Did you also installed SuperSU?
Sent from my ONEPLUS A3003 using Tapatalk
@franciscofranco your updates are messing up Wi-Fi and Bluetooth modules, under OxygenOS v3.5.6-CE.
With Release 3 Wi-Fi was working instead of Bluetooth, now with R5 Bluetooth is working instead of Wi-Fi.
Can you definitively solve these issues?
I trust in your development, because you may represent our revenge on the newer and hated OnePlus 3T, almost in autonomy terms.
Thanks
With Release 3 Wi-Fi was working instead of Bluetooth, now with R5 Bluetooth is working instead of Wi-Fi.
Can you definitively solve these issues?
I trust in your development, because you may represent our revenge on the newer and hated OnePlus 3T, almost in autonomy terms.
Thanks
It's been discussed that the kernel does not offer 100% compatibility with OOS community builds (open beta). If it works, then fine but if any features are broken, then dev won't be providing support.
Look, I deal with WiFi just like any other custom Kernel, I inject the wlan.ko module into /system/lib/modules. So I don't know why and how it doesn't work with some of you. I'm on stock 3.2.8 and it works just like it's supposed to. If you're having ****s with it I suggest you to dirty flash back stock rom, and try again. But when you report these things you gotta be a little more specific and give me more details about your build, possible mods etc.
I had the discount for 4 days. I don't know if I will have a discount again, haven't thought about it.
What's your setup, what were you doing when it derped? More info pls...
You don't need to change anything to achieve good results.
Nothing, Kernel doesn't affect that.
Send a letter to OP and demand them to release Kernel sources for the community builds.
I had the discount for 4 days. I don't know if I will have a discount again, haven't thought about it.
What's your setup, what were you doing when it derped? More info pls...
You don't need to change anything to achieve good results.
Nothing, Kernel doesn't affect that.
Send a letter to OP and demand them to release Kernel sources for the community builds.
Last edited:
What's with you? He said in the original post that this was meant for stable OOS, not for the Open Betas. Stop reporting bugs for an unsupported setup. Sheesh use your head!
to all friends with wifi problem :
flash stock oos 3.2.8
flash latest supersu (i'm using 2.78-SR5)
flash franco.kernel r5
enjoy !
that's what i did to get the wifi working ...
flash stock oos 3.2.8
flash latest supersu (i'm using 2.78-SR5)
flash franco.kernel r5
enjoy !
that's what i did to get the wifi working ...
He said it's coming today/tomorrow.Sorry to be a pain in the ass but still miss your kernel on CM builds...:
Source: his g+ post
Sorry..
I might know whats causing it.I use youtube background(v2.0.1)(Xposed module),that might be causing soft reboots(Occurring At those times only).But it usually doesn't give problems with stock or ex kernel.
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
388Thread closed for unification into a single 3 and 3T thread over here -> https://xdaforums.com/oneplus-3/one...kernel-francokernel-18th-january-r45-t389129361New franco.Kernel version for the OnePlus 3
r11
1. Merged a patch from One Plus that fixes an issue with voltages
2. Merged some security patches
3. Packed a lot of long-time (some are persistent) background running daemons to run solely on a specific cpuset called system-background, which limits them to run only on cpu0 and cpu1, to save power
zip: https://kernels.franco-lnx.net/OnePlus3/7.0/anyKernel/fk-r11-anykernel2.zip
Franco Kernel Manager & Updater is the best companion for this Kernel (https://play.google.com/store/apps/details?id=com.franco.kernel)
If you don't (yet) have my full featured app you can always just download its free counter part which lets you seamlessly and automagically update Franco Kernel on your device. It's free and my cat approves! (https://play.google.com/store/apps/details?id=com.franco.kernel.free)
I also strongly suggest you install Naptime (https://play.google.com/store/apps/details?id=com.franco.doze), for free, to achieve the best battery life through out the day. Try it, you won't be disappointed!57
If OP releases Kernel sources, then yes. But they usually don't. I use an iPhone 7, suits me better when out of the house since I don't wanna be thinking about Android or apps all the time (I end up doing that, but at least I'm not using the platform so I can rest my head). I'm mostly active on my device forums. Not active anymore on Tuna, barely on Mako, not on Grouper, slacking on the One Plus One, and Nexus 7 2013 I should be a bit more. Rest of them I am very very active.
Tricky question about finding time for life. I try to sleep less, which leaves me more time to work in between. My long-date GF still struggles to understand that even if she's on a off-work day that I can't stop and I have **** to do as if I was in a normal job, which pisses me off tremendously, so I end up working ~15 hours per day when she's off to work, and about half of that when she's not working. It's hard. It's not something anyone here realises since I don't really complain, but it's hard. I gotta run Kernels, apps, marketing, user support on XDA, Twitter, Google+, e-mail, and I have to keep thinking of new ideas, better ways to implement features, how to fix hard to fix bugs. prioritize what I should waste my time on/what I shouldn't, and I still have to find time to read, and keep learning. And then, as mostly everyone else (if not, I'm sorry) I still have a family and **** storms from family bull**** like any other person etc. I barely ever feel tired, and I only had one (very) small mental breakdown last year where I was really reaching my limit, but I fixed it in about a day. Other than that I'm a very happy person, very positive, and always looking for the good things during the darkest times.
TLDR: it's hard. But I give it all to make it happen.44r6 is up! It should cure all WiFi ****ery on module loading. Had help from @osm0sis . Took me a while to figure this one out and had the help from my early work on the OP3T since some of their users were having the same problem so after scratching my head for a while and osm0sis helping we figured it out.
Also lower power consumption from the big cluster, lowered hispeed_freq and min_sample_time. This should net you some major savings through the day.
Sorry couldn't get the CM14.1 version out this weekend, I tried, but was overwhelmed with 23497329473 different things. I'll try my best through the week.43OK, this initial response is super unexpected. I had a VERY rough day today because of a close family member passing away and it really warms my heart to see SO MANY positive posts, means the world to me.
With that out of the way, couple things:
1 - Please read the changelogs & OPs. This is not meant to be flashed in the community build because we have no Kernel sources for that. The changelog specifically says Oxygen OS. Please read before asking;
2 - It's obvious this won't work on the 3T (duh!);
3 - Don't bother asking for 3T Kernel. I already asked OP to send me a device. It's up to them not me because I'm not buying it myself just for development.
:highfive:
You're ****ing welcome.
Read the notice at the top of this post.
Ahah LG Optimus One, what a frickin' legend.
Weird. I'll check my crash logs
What for? Even connected to the computer this thing charges pretty fast.
It's a great device!
Difficult to say because I really can't say bad things about ElementalX or flar2. Great guy and been doing some amazing works.
What I'm pretty good at is finding a great setup for flash & forget situation. I spend a lot of time measuring & reading to feedback and ajust the Kernel to be ready to use as I see fit with a nearly perfect balance between great battery life without compromising performance (trust me, it's hard). Also I go to great lenghts to be active (you can see by my post count & thanks number how active I am) and make it feel like every user is important to me and part of the whole thing. I really spend a long time squeezing that extra minute of battery life and my custom Kernels are known for that.
Other than that I'm usually pretty explicit on my github patches so it's easy to read it up and check what I've been doing.
FKUpdater is my app. You don't need to buy it, it's just a convenience (and supports me of course). Read my reply above.
No. The Kernel has absolutely nothing to do with notifications going through or not.
No... that's a pretty dumb question seeing this is the One Plus 3 forum.
Yeah!!!
Eheh, don't exagerate. I'm happy to be here and provide a good experience.
Ugh, where exactly? I don't remember having any restriction on freqs. Have you updated to FKUpdater 2.1.4?
I'll see if that's possible. Display profiles well, I can add some built-in ones if the community builds them for me.
