[AKT] Advanced Kernel Tweaks v1.6 FINAL | Insane Battery & Performance(SD820/1|OP3/T)

22nd January 2017 08:29 PM 0 Thanks

Stupifier Senior Member

Quote:

Originally Posted by dioxide95

1. Can anyone please explain the difference between input boost and touch boost? (I use kernel adiutor)

2. I have enabled "apply on boot" for the tweaked settings (Project x.a.n.a applied through terminal) via kernel adiutor... I think that doesn't require me to apply via terminal after every reboot, right?

I don't think step 2 is in any of the Instructions for AKT.......So I would assume you STILL need to apply via terminal after every reboot. I bet there are settings that AKT applies which are not discretely covered inside Kernel Auditor and the "Apply on Boot" options....this is why AKT apply via terminal is necessary

22nd January 2017 10:18 PM 0 Thanks

raydekok Senior Member

Quote:

Originally Posted by mascian

@Eadaro
I conclude that with ElementalX does not need to apply the tweak at every reboot.
Thank you, very much

You sure? Just updated xkernel and wanted just to ask if i had to run the script again.

22nd January 2017 10:21 PM 3 Thanks

Asiier Senior Member

Quote:

Originally Posted by mascian

flar2 wrote:
"Init.d has not worked reliably since before Lollipop, so no, it's not supported. You should use SuperSU and su.d instead."
Unfortunately, Elementalx and bluespark does not support init.d
Too eng.stk wrote:
"init.d support (put your scripts in /system/su.d or /su.su.d)"*
@Asiier
Can I change the path of the file after using the AKT command?

from "/system/init.d/99AKT" to "/system/su.d/99AKT"

In your opinion, it would correct this procedure?
Thank you, very much.

Quote:

Originally Posted by mascian

Sorry, your question better to wait for Asiier's answer

Quote:

Originally Posted by harish_hpd

but after reboot when i check it shows active profile as what i have selected before.. does it mean its working without having to apply a profile on every boot?
thanks in advance for clearing my doubt.

Send From Oneplus A3003

Quote:

Originally Posted by mrcigi

I found I had better success with the file in su.d than in init.d

Quote:

Originally Posted by harish_hpd

now i have the file in both su.d (copied from init.d) and initd locations. how can i confirm if its working without needing to apply profile in terminal on every reboot... thanks for your reply..

Send From Oneplus A3003

I have now added su.d support to AKT

So we have both init.d & su.d support, although, I still recommend to manually reapply them (or use tasker) after boot, as sometimes init.d and su.d apply the profile but incorrectly, giving us lags, shutters and less performance or battery.

It will come with AKT 1.2 which I will realease soon... very soon

Quote:

Originally Posted by SREEPRAJAY

@Asiier @Mostafa Wael
Finally managed to get the AKT working on Experience ROM 7.0

Just followed this sequence (not sure if it is related to each other )
Clean flash the 9.6 Experience ROM
SuperSU
Reboot to system
Reboot to recovery. Instal ElementalX Kernel and then AKT 1.0
reboot and then Terminal (grant super rights) and then work on AKT.
Voila ....Xana profiles work.... working perfectly.

Thanks guys

Quote:

Originally Posted by SREEPRAJAY

@Asiier @Mostafa Wael @patalao and senthil

Wanted to leave a few pics as a testimony to the wonderful work you guys have done...still more than 50% juice left...

Plz pardon me for the large pics...courtesy the legacy app
Attachment 4012940 Attachment 4012941

Sent from my ONEPLUS A3003 using XDA-Developers Legacy app

That looks dope man!

I'm glad you are liking it so far

Quote:

Originally Posted by dioxide95

Quote:

Originally Posted by Stupifier

1. Both are CPU boost that are trigger on users input (touching the screen) the difference is mainly one; Touch boost cannot be configure and Input boost can. So touch boost will always boost the CPU to 1036 MHz ( really unefficient freq btw) during X ms. With Input boost we can modify that settings

2. Okay, so KA will do the init.d emulation, so you will need to have "Apply on Boot" toggled on Init.d emulation. Although, I recommend reapplying the profiles manually, as takes little time and ensure no errors

22nd January 2017 11:16 PM 1 Thanks

basvanasperdt Senior Member

Don't want to spoil the surprise, but I just downloaded AKT 1.2 from @Asiier his page on AndroidFileHost 😁

22nd January 2017 11:17 PM 34 Thanks

Asiier Senior Member

Alright guys, I have to thanks you all of you for this.
We have reached 2000 downloads on [A·K·T] Profiles v1.0 That's HUGE!

So I think it's time to release version 1.2

Go check its post for the changelog and download link and maybe give it a thanks If you haven't already!
[A·K·T] Profiles v1.2

I was waiting for @mrcigi to release the app
Check it out over here

Also, make sure to vote on our massive polls for letting us know what profiles you guys like the best
Massive Poll

Let's keep everything rolling and hopefully, we will be featured on the Portal

22nd January 2017 11:18 PM 0 Thanks

Asiier Senior Member

Quote:

Originally Posted by basvanasperdt

Don't want to spoil the surprise, but I just downloaded AKT 1.2 from @Asiier his page on AndroidFileHost

Hahaha, you were faster than me buddy!

22nd January 2017 11:21 PM 1 Thanks

basvanasperdt Senior Member

Quote:

Originally Posted by Asiier

Hahaha, you were faster than me buddy!

Got exicted from your 'very soon' post, so I've been refreshing the page a couple of times
Very happy with it, keep up the good work!

23rd January 2017 12:19 AM 0 Thanks

harish_hpd Senior Member

how to use tasker to execute command at boot? can someone tell me step by step instruction?

Send From Oneplus A3003

23rd January 2017 01:09 AM 222 Thanks

mrcigi Senior Member

I'd like to release my AKT Profiles App [v1.6.0] [ROOT]

Thankyou to all involved in AKT and all the slack channel for helping me test and improve the app.
What started as just some experimentation with tasker, evolved into a complete app.

APP is compatible with the OP3 & OP3T only. May work on other devices but no support is given.

Features
- Complete standalone app (No need to flash AKT, or run any commands in terminal)
- All profiles included in the AKT script are included in this.
- The app will auto apply your chosen profile on each reboot and notify you that its been reapplied (If Selected on Sidemenu, ON by default)
- No need to delete profiles if you want to switch, just apply new profile and it will overwrite the previous.
- Option to revert back to stock settings (On Sidemenu)
- Shows you the current applied profile (On Sidemenu)
- Added Dark Theme option (On Sidemenu)

Download AKT Profiles APP 1.6.0
https://www.androidfilehost.com/?fid=745425885120764798

Instructions

Download and Install the app
Pick which catagory of profile you want
Select a profile. A popup telling you the profile is being applied will popup.
Wait patiently for the Profile applied Popup (Shows output)
Pick if you want to apply on boot, or show notification.
Your good to go

Changelog v1.6.0

Magisk finally fully supported, no need for a work around anymore
Updates on all Zhana and X.A.N.A Profile (4.3)
Updates on Burnout and Fusion Reborn
Now the zip and app shares directories. Which means if both zip and app installed, the app will apply the profile chosen in either on boot.
Some minor fixes and corrections

Changelog v1.4

Now Supported OP3T / SD821
Updates on all Profiles for 3T / SD821 (Except for Nameless)
Updates on X.A.N.A *beta* and Burnout
Dark Theme option added (On Sidemenu)

Changelog v1.3

Complete redesign
Added Sidemenu with selectable options (Button top left or swipe from the left)
Options to turn on and off 'Apply on boot' and 'Boot up notification' (ON by defualt)
Profiles updated to match AKT Profiles 1.3 Zip
New profile added (Fusion Conservative)

Changelog v1.2.2

Added current applied profile on homescreen
Under the hood changes to improve how things are done

Changelog v1.2.1

Removed the 'sleep' commands from the script (Significantly faster at applying the profiles)
Added an option to revert to stock settings (3 Dot menu, top right of homescreen, requires reboot)
Increased the time the Applied popup stays open (More time to check the output)

Thanks again to @Asiier @patalao @Senthil360 @Mostafa Wael for there fantasic work on AKT and all the profiles.

23rd January 2017 01:13 AM 2 Thanks

Stupifier Senior Member

Quote:

Originally Posted by harish_hpd

how to use tasker to execute command at boot? can someone tell me step by step instruction?

Send From Oneplus A3003

Run Shell action
Command = sh /system/etc/init.d/99AKT
Use Root checked

Page 255 of 535 First 155 205 245 253 254 255 256 257 265 305 355 Last

[AKT] Advanced Kernel Tweaks v1.6 FINAL | Insane Battery & Performance(SD820/1|OP3/T)

{{post_title}}