FORUMS
Remove All Ads from XDA

[TOOL] SKIPSOFT ANDROID TOOLKIT - OnePlus 3T - Drivers,Unlock,Firmware,Root

12,185 posts
Thanks Meter: 15,742
 
By mskip, Retired Senior Moderator on 16th May 2017, 02:33 PM
Post Reply Email Thread
ONEPLUS 3T- SUPPORTS ALL VERSIONS UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*

The Unified Android Toolkit brings together all the Google, Nexus, OnePlus and Samsung Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.

FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check md5 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Download/sideload stock OTA image (G,N,O)
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Stock Recovery, CWM touch, Philz_touch or TWRP Touch Recovery
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser file and custom recovery images to latest versions (PRO ONLY)
* Disable forced encryption on Nexus5X,6,6P and 9
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode (G,N,O)
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device

Key: G-Google N-Nexus O-OnePlus S-Samsung

--------------------------------------------------------------
ToolKit Main Menu
--------------------------------------------------------------

SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*

DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)

NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.

Credits: Grarak or TWRP custom recovery on OnePlus 3, ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.

--------------------------------------------------------------

WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.

ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).

MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.

AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv

--------------------------------------------------------------

PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.

--------------------------------------------------------------

1. INSTALLING ADB/FASTBOOT DRIVERS

The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.

THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.

If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.

Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.

On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.

--------------------------------------------------------------

2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT

When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.

Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).


--------------------------------------------------------------

USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Up' and 'Power' buttons to boot the phone into FastBoot Mode

How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery

--------------------------------------------------------------

*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
The Following 25 Users Say Thank You to mskip For This Useful Post: [ View ] Gift mskip Ad-Free
 
 
16th May 2017, 02:33 PM |#2  
mskip's Avatar
OP Retired Senior Moderator
Flag Norfolk
Thanks Meter: 15,742
 
Donate to Me
More
*FAQ*
The Following 4 Users Say Thank You to mskip For This Useful Post: [ View ] Gift mskip Ad-Free
16th May 2017, 02:34 PM |#3  
mskip's Avatar
OP Retired Senior Moderator
Flag Norfolk
Thanks Meter: 15,742
 
Donate to Me
More
*VIDEOS*
The Following 2 Users Say Thank You to mskip For This Useful Post: [ View ] Gift mskip Ad-Free
16th May 2017, 03:53 PM |#4  
Senior Member
Flag Tuticorin
Thanks Meter: 53
 
More
Great very useful.
16th May 2017, 07:33 PM |#5  
marchetto96's Avatar
Senior Member
Flag Porto Alegre
Thanks Meter: 1,594
 
Donate to Me
More
Wow, great job! Thanks for this
16th May 2017, 08:20 PM |#6  
moskito-hd2's Avatar
Senior Member
Flag AM - Germany
Thanks Meter: 144
 
More
Great news, I used your Toolkit for my Nexus 4 / Nexus 5...


Gesendet von meinem ONEPLUS A3003 mit Tapatalk
16th May 2017, 09:26 PM |#7  
Senior Member
Thanks Meter: 80
 
More
Great news 😍 i need this
17th May 2017, 12:26 AM |#8  
mskip's Avatar
OP Retired Senior Moderator
Flag Norfolk
Thanks Meter: 15,742
 
Donate to Me
More
Updated OnePlus 3T Device Module for Public (free) and Pro Users [v1.0.3]

Changelog:
v1.0.3 – 17th May 2017
+Added full support for OnePlus Open BETA 7 build
+Added instructions in OTA section [10] how to update device via OTA sideload
+Added option in OTA section to go to OnePlus download page to download ota image
+Few minor fixes to OnePlus main code

Pro users can get the latest version by just selecting their device at startup and accepting the update.

Non Pro users have a few more steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the installation folder (or the Start Menu)
3. Select your device (OnePlus 3T) from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Restart the Toolkit, select the device and new module files will be downloaded/installed

If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.

Enjoy, Mark.
The Following 5 Users Say Thank You to mskip For This Useful Post: [ View ] Gift mskip Ad-Free
17th May 2017, 01:52 AM |#9  
alleykat2561's Avatar
Member
Flag CC, TX
Thanks Meter: 9
 
More
Awesome, thank you!
17th May 2017, 05:15 AM |#10  
tzbigworm's Avatar
Senior Member
Flag Tulare
Thanks Meter: 243
 
More
Oh wow, this is definitely a good tool. Nice and complete. Thank you much, OP.
17th May 2017, 08:08 AM |#11  
Junior Member
Thanks Meter: 0
 
More
Looks really helpful for newbies, anyone tried this?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes