[KERNEL] [blu_spark r106 OP7/Pro] [OOS /Custom A10]
- Thread starter eng.stk
- Start date
- Status
wich GCam Version ist recommend for this Mod?Added a Magisk module with GCam mod fixes (thanks to freak07) like aux mode to the blu_spark v9.103 extras post.
Enjoy
Gesendet von meinem GM1913 mit Tapatalk
Whatever you want and has the advanced settings to turn on aux.
I used Gcam_6.2.030_Advanced_V2.2.190716.1800-Final.apk for testing it.
I'm getting an Android version error when trying to install it with Q. Sure it works?
This is how I made it work,
Device should already be on OOS 9.5.9, Blu_spark twrp, rooted with magisk 19.3(installing Q if you are on 9.5.10 have given many people black screen issues), if these conditions are met than carry on,
Reboot to twrp,
Don't wipe anything,
Flash Q DP3,
Flash Blu_spark twrp zip file,
Reboot twrp,
Flash magisk 19.3,
Wipe dalvik cache,
Reboot system, all done.
System will take some time to boot may be reboot itself before full system reboot, when fully booted just leave it for 10 minutes let it do its thing, should be ok than. But keep in mind my device is fully decrypted so if you are not decrypted device might behave differently, be on a safe side and backup all data before hand, hope this helps, cheers.
Dev, kernel working great in op7. Better battery life than stock.
I have weird problem, in op it said swap disabled, default io is zen,
But when i flashed the kernel and open exkernel manager, nothing is changed, swapfile is enabled, io is cfq,
I manually changed to zen and swapfile disabled and vibration strength also not showing in exkernel.
Is it flashing problem.. I tried in clean stock rom.
I have weird problem, in op it said swap disabled, default io is zen,
But when i flashed the kernel and open exkernel manager, nothing is changed, swapfile is enabled, io is cfq,
I manually changed to zen and swapfile disabled and vibration strength also not showing in exkernel.
Is it flashing problem.. I tried in clean stock rom.
Try restore Stock boot (or using Restore_stock_file.zip in Kiri thread), then flash blu_spark > Magisk > blu_spark again.
The first time I flashed this kernel I also have that problem, but after trying with above steps, everything is fine.
I tried but it didn't worked out.
I'm manually changed everything in exkernel manager.
blu_spark r29 release (unified)
All right crew!
New build is up :highfive:
This kernel is unified, good to go on OP7/Pro (I only can test on Pro).
Added a custom ROM variant, at the moment I will only support ROMs that follow CAF/AOSP wifi module usage (I tested on OMNI). So if you use a custom ROM with builtin driver (like LOS), you're out of luck.
Also checkout latest recommended blu_spark extras with blu_twrp v9.103.
blu_spark_r29 release
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
All right crew!
New build is up :highfive:
This kernel is unified, good to go on OP7/Pro (I only can test on Pro).
Added a custom ROM variant, at the moment I will only support ROMs that follow CAF/AOSP wifi module usage (I tested on OMNI). So if you use a custom ROM with builtin driver (like LOS), you're out of luck.
Also checkout latest recommended blu_spark extras with blu_twrp v9.103.
blu_spark_r29 release
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Last edited:
galaxys
Recognized Contributor
Your updates are faster than a speeding bullet! Kudos
Last edited:
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
74
Kernel features:
- Build with custom toolchain blu_gcc-10.1 (cortex-a76.cortex-a55 targeted, build from gcc-10.1.0 snapshot with latest bleeding edge components)
- Full -O2 build with device and target flags enhanced, linaro build improvements, etc
- Less is more: stockish OP7 builds based on OnePlusOSS/android_kernel_oneplus_sm8150 for max stability
- Systemless installer (doesn't touch system partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
- Removed some debug and logging options
- ARM enhanced performance and battery patches
- CVE security patches, general upstream and CAF fixes for important subsystems
- Several CPU Governors (blu_schedutil modded governor merged from latest CAF sm8150 patchset)
- No OC, use 300HZ base timer frequency
- msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
- Enhanced TCP methods (westwood is default), Network tweaks and updated drivers
- Several I/O control tweaks, added schedulers ZEN v2 is default, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
- Patched SafetyNet flags to pass CTS
- Stock thermal driver by default
- ZRAM Swap (LZ4) and with file disabled
- Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
- KGSL fixes and reworked GPU driver
- adrenoboost enabled by default at low level
- KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
- KLAPSE support (v5.0)
- Backlight min brightness option
- Gamepad support enabled (xbox, ps4, switch)
- USB Fast Charge (USB mode up to 900mA with MTP on)
- FS fsync toggle on/off
- Wakelock blockers available
- wireguard support
- CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
- Compatible with Kernel Adiutor, EXKM, FKM and others
(No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> flash TWRP --> reboot to recovery --> flash Magisk if you want (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
OnePlus 7 Pro development unit donated by OnePlus. Big shouts to them
Very proud of being on the OnePlus Developer Program, special thanks to Manu J. for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for OnePlus 7/Pro, Kernel for the OnePlus 7 Pro
Contributors
eng.stk
Source Code: https://github.com/engstk/op7
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r106 unified
Stable Release Date: 2020-06-27
Current Beta Version: r67 unified
Beta Release Date: 2019-12-16
Created 2019-06-30
Last Updated 2020-07-0238blu_spark extras v9.103
All right crew!
Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-9.0 branch (including more recent upstream than official TWRP) and some specific device fixes.
Fully synced with TWRP 3.3.1+, name changing to reflect base 9.version, full compatible with Pie stuff.
To use the img, fastboot boot the img and then install recovery from within TWRP (go to Advanced -> Install Recovery Ramdisk -> Select TWRP img). It will install to both slots.
There's an all new blu_spark exclusive AK3 powered TWRP installer zip, flash as always.
The TWRP is unified, good to go in 7/Pro variants supportes by the kernel.
Delete your twrp settings or else issues may arise if coming from other version besides blu_spark.
twrp-3.3.1-x_blu_spark_v9.103_op7x
Wakelock blocker info and example script
Awesome blu_spark boot animations Magisk module by @trapcoder666
GCam mod fixes including aux mode Magisk module
I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
If your cat get's on fire you're on your own ;p
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free32blu_spark r7 release (unified)
All right crew!
First build is up :highfive:
OnePlus sent my 7 Pro developer unit yesterday (in all blu glory), today the fist victim is out ;p
This kernel is unified, should be good on OP7/Pro (I only can test on Pro).
blu_spark_r7 release
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free30blu_spark r57 release (unified Android 10)
All right crew!
New build is up :highfive:
This kernel is unified, good to go on OP7/Pro (I only can test on Pro).
Also checkout latest recommended blu_spark extras with blu_twrp v9.106.
blu_spark_r57 release
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free27blu_spark r16 release (unified)
All right crew!
New build is up :highfive:
This kernel is unified, should be good on OP7/Pro (I only can test on Pro).
blu_spark_r16 release
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
