FORUMS
Remove All Ads from XDA

[ROM][STOCK][FASTBOOT][OP7P] Stock Fastboot ROMs for OnePlus 7 Pro

2,958 posts
Thanks Meter: 5,903
 
Post Reply Email Thread
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock or twrp) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.

HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 7 Pro in fastboot mode (Power and volume + and volume-);
Connect the OnePlus 7 Pro to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.

FLASHER ADVANCED GUIDE
flash-all-partitions-fastboot.bat : this .bat will flash all possible partitions through fastboot (Except persist) , there are some criticals partitions that can't be flashed through fastboot;
flash-only-persist.bat : this .bat will flash only persist partition in fastboot mode (This is good for people that have problems with sensor);
flash-all-partitions-recovery-criticals.bat : this .bat will boot the twrp and will flash criticals partitions, use this carefully;
flash-system-boot-vendor.bat : this .bat is the same of older flash-all.bat and so it will flash only vendor, system and boot;
flash-all-partitions.bat : this .bat will run flash-all-partitions-fastboot.bat , then flash-only-persist.bat and then flash-all-partitions-recovery-criticals.bat .

Now usually the one needed is only the first "flash-all-partitions-fastboot.bat" but if you are badly bricked i recommend to use flash-all-partitions.bat .


DOWNLOAD

All roms on AFH: https://www.androidfilehost.com/?w=files&flid=294300

BRANDED PHONE
For now branded device are not supported

MANUAL FLASH: Windows - OSX - Linux

If you want to manual flash these roms these are the commands (you need to extract images.zip before proceed)

Fastboot Partitions:
Code:
fastboot flash aop_a aop.img
fastboot flash aop_b aop.img
fastboot flash bluetooth_a bluetooth.img
fastboot flash bluetooth_b bluetooth.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dsp_a dsp.img
fastboot flash dsp_b dsp.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw_a qupfw.img
fastboot flash qupfw_b qupfw.img
fastboot flash storsec_a storsec.img
fastboot flash storsec_b storsec.img
fastboot flash system_a system.img
fastboot flash system_b system.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash LOGO_a LOGO.img
fastboot flash LOGO_b LOGO.img

If you need also persist partition, this is the command:
Code:
fastboot flash persist persist.img


Criticals Partitions, for these you need to boot the TWRP:
Code:
fastboot boot TWRP.img

When you are in TWRP you need to run these commands to push and flash all criticals partitions:
Code:
adb push abl.img /sdcard/abl.img
adb shell dd if=/sdcard/abl.img of=/dev/block/bootdevice/by-name/abl_a
adb shell dd if=/sdcard/abl.img of=/dev/block/bootdevice/by-name/abl_b
adb push cmnlib.img /sdcard/cmnlib.img
adb shell dd if=/sdcard/cmnlib.img of=/dev/block/bootdevice/by-name/cmnlib_a
adb shell dd if=/sdcard/cmnlib.img of=/dev/block/bootdevice/by-name/cmnlib_b
adb push cmnlib64.img /sdcard/cmnlib64.img
adb shell dd if=/sdcard/cmnlib64.img of=/dev/block/bootdevice/by-name/cmnlib64_a
adb shell dd if=/sdcard/cmnlib64.img of=/dev/block/bootdevice/by-name/cmnlib64_b
adb push devcfg.img /sdcard/devcfg.img
adb shell dd if=/sdcard/devcfg.img of=/dev/block/bootdevice/by-name/devcfg_a
adb shell dd if=/sdcard/devcfg.img of=/dev/block/bootdevice/by-name/devcfg_b
adb push hyp.img /sdcard/hyp.img
adb shell dd if=/sdcard/hyp.img of=/dev/block/bootdevice/by-name/hyp_a
adb shell dd if=/sdcard/hyp.img of=/dev/block/bootdevice/by-name/hyp_b
adb push keymaster.img /sdcard/keymaster.img
adb shell dd if=/sdcard/keymaster.img of=/dev/block/bootdevice/by-name/keymaster_a
adb shell dd if=/sdcard/keymaster.img of=/dev/block/bootdevice/by-name/keymaster_b
adb push xbl.img /sdcard/xbl.img
adb shell dd if=/sdcard/xbl.img of=/dev/block/bootdevice/by-name/xbl_a
adb shell dd if=/sdcard/xbl.img of=/dev/block/bootdevice/by-name/xbl_b
adb push xbl_config.img /sdcard/xbl_config.img
adb shell dd if=/sdcard/xbl_config.img of=/dev/block/bootdevice/by-name/xbl_config_a
adb shell dd if=/sdcard/xbl_config.img of=/dev/block/bootdevice/by-name/xbl_config_b
adb push odm.img /sdcard/odm.img
adb shell dd if=/sdcard/odm.img of=/dev/block/bootdevice/by-name/odm_a
adb shell dd if=/sdcard/odm_config.img of=/dev/block/bootdevice/by-name/odm_b
adb push tz.img /sdcard/tz.img
adb shell dd if=/sdcard/tz.img of=/dev/block/bootdevice/by-name/tz_a
adb shell dd if=/sdcard/tz.img of=/dev/block/bootdevice/by-name/tz_b


REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.

These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.

If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.

If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide

If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/

Thanks to @SaiBork for first time tested

If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/sho...5&postcount=34

DONATE LINK

If you want to support this and others my projects please consider making a donation, thanks.

Donate link
The Following 26 Users Say Thank You to mauronofrio For This Useful Post: [ View ] Gift mauronofrio Ad-Free
 
 
18th May 2019, 10:28 PM |#2  
Senior Member
Thanks Meter: 83
 
More
I know you said not for branded devices, are the partitions different for these devices?

Just wondering if this could be what we need to convert the T-Mobile version and if so if you need tester.
18th May 2019, 10:30 PM |#3  
Quote:
Originally Posted by criptix

I know you said not for branded devices, are the partitions different for these devices?

Yes, sometimes also the rom is different. Actually the branded devices can't use this rom also if they want, because to use this rom you need to have an unlocked bootloader
18th May 2019, 10:30 PM |#4  
Senior Member
Thanks Meter: 83
 
More
Yeah figured bootloader would need to be unlocked as well.

If you happen to need testers for the conversion ( if your working on it) let me know.
18th May 2019, 11:32 PM |#5  
sabrdawg's Avatar
Senior Member
Flag Buffalo
Thanks Meter: 289
 
More
I just SIM unlocked my T-Mobile variant today, and also applied for my unlock .bin on the OnePlus site!
The Following User Says Thank You to sabrdawg For This Useful Post: [ View ] Gift sabrdawg Ad-Free
19th May 2019, 03:36 AM |#6  
Junior Member
Thanks Meter: 1
 
More
Thank you! You revived my phone!
The Following User Says Thank You to zzs001 For This Useful Post: [ View ] Gift zzs001 Ad-Free
19th May 2019, 12:03 PM |#7  
Quote:
Originally Posted by zzs001

Thank you! You revived my phone!

Perfect, like for others oneplus devices i will continue to support them, if you want to contribute and help me, please consider making a donation, thanks.

Donate link
21st May 2019, 02:24 PM |#8  
Senior Member
Flag Copenhagen
Thanks Meter: 258
 
More
I've F-ed my international 7 Pro up, used your flash all, seemed to have work, but stuck in a loop now... Anyone got any suggestions, please?
I was so happy when I found this post, I thought my problems were over, but yeah... apparently not
21st May 2019, 02:40 PM |#9  
Quote:
Originally Posted by posedatull

I've F-ed my international 7 Pro up, used your flash all, seemed to have work, but stuck in a loop now... Anyone got any suggestions, please?
I was so happy when I found this post, I thought my problems were over, but yeah... apparently not

which version you had before use fastboot rom? which fastboot rom did you used?
21st May 2019, 02:43 PM |#10  
Senior Member
Flag Copenhagen
Thanks Meter: 258
 
More
I was on stock, tried to install twrp, didnt go well (wouldn't mount), and i wanted to wipe data/cache, and mistakenly wiped system as well because i wasnt paying attention. Tried putting the stock recovery, still wouldnt boot due to obvious reasons.... then I found this
Basically I had the 9.5.4 with deleted system when I attempted to use the flash all bat.

GM21BA, european 12gb one, if it makes any difference...
21st May 2019, 02:47 PM |#11  
Quote:
Originally Posted by posedatull

I was on stock, tried to install twrp, didnt go well (wouldn't mount), and i wanted to wipe data/cache, and mistakenly wiped system as well because i wasnt paying attention. Tried putting the stock recovery, still wouldnt boot due to obvious reasons.... then I found this
Basically I had the 9.5.4 with deleted system when I attempted to use the flash all bat.

GM21BA, european 12gb one, if it makes any difference...

So you should use the 9.5.4 fastboot rom, have you used it?
Post Reply Subscribe to Thread

Tags
fastboot, fastboot rom, mauronofrio, oneplus 7 pro, stock rom

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes