I was able to get my phone connected and plugged in.
You need to install the below driver to have your phone get connected.
Here's the guide to get your phone connected and able to be restored (Note that I did NOT restore my phone via this tool so I did not test to make sure the image works)
1) Download the T-Mobile & MSM tool above (don't worry about L2 drivers)
2) Install the attached Qualcom driver. (Just keep clicking next, use default settings)
3) Run MSM tool
4) On phone (After shutting it down completely), hold the volume buttons and plug it in. You should hear your phone disconnect and then reconnect. When you hear it reconnect, click "Enum" and your phone should be listed as "Connected". Do NOT let go to the volume keys until you press Start.
5) Once the process starts, it will take about 5 minutes.
Let me know if you guys have any questions.