[E610/E612/E617][ROM][NMF26V][7.1.1]Lineage 14.1[UNOFFICIAL][ALPHA 1]

Search This thread

Jonas Cardoso

Senior Member
Mar 22, 2014
1,681
2,989
25
São José dos Campos
0KrfGVM.png

Lineage is a free, community built, aftermarket firmware distribution of Android 7.1 (NOUGAT), which is designed to increase performance and reliability over stock Android for your device.​

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.​
attachment.php


  • Display
  • Vibration
  • GPS
  • Sensors of All type
  • Bluetooth
  • Bluetooth tethering
  • All native apps
  • GPS
  • Sdcard0/Sdcard1
  • Video playback
  • OpenGL rendering
  • Hardware video decoding & encoding
  • USB-tethering
  • OMX
  • Mtp/ptp

attachment.php

  • Flashlight
    @bartbart2003 There is a way to enable flashlight:
    Code:
    echo 1 > /sys/devices/platform/i2c-gpio.3/i2c-3/3-0030/brightness_uA
    To disable flashlight:
    Code:
    echo 0 > /sys/devices/platform/i2c-gpio.3/i2c-3/3-0030/brightness_uA
  • Ril
  • NFC removed by default
  • WiFi
  • Tethering wifi
  • Camera (photos, camcorder & panorama)
  • Audio playback
  • Audio recording
  • Google Apps
  • More things I do not know

attachment.php


attachment.php


Note : LINEAGE-14.1 is only for jellybean (v20) baseband. If you are on ics (v10) baseband flash v20 baseband
  • TWRP 3.0.3.0 Recovery
  • Wipe all partitions except sdcard!
  • Flash the lineage-14.1-*-UNOFFICIAL-e610.zip
  • After flash Gapps(Long boot time)(DONT MAKE THIS)
  • Reboot
  • If you used GAPPS, after SetupWizard, go to: "Settings" > "Apps" > "Google Play Services" > "Permissions" > And select all options, this fix FC of ... hmm, Google Play Services? The Google may know this problem but it is like "**** you and your Custom ROM"


Screenshots:

h9wppYX.png
RVMY2mv.png
kDQK7DP.png
CTiGEtM.png
yEPpZ1F.png
l6vMvsp.png
rojrBvj.png
ZUPnBjt.png
HDIK9lt.png
Sq1ATmN.png
rSIKQJC.png
MytJYaC.png
IwKCxtO.png
XOTz3Lq.png



XDA:DevDB Information
Lineage 14.1, ROM for the LG Optimus L5

Contributors
Jonas Cardoso, Caio99BR, SlimShady's, InsideMuz
Source Code: http://github.com/teamhacklg

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: V20 Baseband

Version Information
Status: Alpha

Created 2017-02-13
Last Updated 2017-02-15
 

Jonas Cardoso

Senior Member
Mar 22, 2014
1,681
2,989
25
São José dos Campos
attachment.php

Frequently asked questions

Q: Will this conflict with any mod I'm using?
A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!

Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)

Q: Which version should I flash
A: Flash kernel with model number (E612), don't use (E610) or you may have problems with deep sleep

Q: Which frequency is the safest
A: The default frequency, 800MHz, is the safest!
But, there's no harm in overclocking upto 1100MHz.
You MAY face some issues on 1100MHz-1100MHz, but 1050MHz is stable as 'rock'!

Q: WiFi doesnt work for me
A: Reflash ROM and Kernel

Q: How to logcat?
A: Here

A problem in ROM not reported?
Make a logcat post here
 
C

Caio99BR

Guest
i will help you with this project already have l7 build but trying to fix ril then upload hit me up on telegram

Seriously, I have think you have get out from this Forum, anyway I don't think working on it will be useful since neither Marshmallow (neither KitKat is real) is daily usable, it will be lost of time working in a build for 10 or 5 peoples or none.

I'm not saying to yours not continue, but it's really waste of life
 
Dec 5, 2015
28
9
Thanks Jonas, you're the best.

---------- Post added at 07:09 AM ---------- Previous post was at 07:02 AM ----------

I am 1 of 10 or 5 people and you really made me happy with this ROM. Thank you.
I'M USING GOOGLE TRANSLATOR
 
  • Like
Reactions: Jonas Cardoso

ahmedAZ

Senior Member
Dec 22, 2015
132
23
1-disable bootanimation will decrease boot time
2-don't install gapps but install microG after installtion and then install google sync adopters
3-use aosp browser not gello
4-if installation of apps takes long time use this and will install much much faster https://play.google.com/store/apps/details?id=com.sharon.oneclickinstaller&hl
...
this is my experience in cm13 for lg l3 ii and it is same in yours
i could solve most lagging problems in mine except heavy apps like Facebook
 
  • Like
Reactions: Jonas Cardoso

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    0KrfGVM.png

    Lineage is a free, community built, aftermarket firmware distribution of Android 7.1 (NOUGAT), which is designed to increase performance and reliability over stock Android for your device.​

    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.​
    attachment.php


    • Display
    • Vibration
    • GPS
    • Sensors of All type
    • Bluetooth
    • Bluetooth tethering
    • All native apps
    • GPS
    • Sdcard0/Sdcard1
    • Video playback
    • OpenGL rendering
    • Hardware video decoding & encoding
    • USB-tethering
    • OMX
    • Mtp/ptp

    attachment.php

    • Flashlight
      @bartbart2003 There is a way to enable flashlight:
      Code:
      echo 1 > /sys/devices/platform/i2c-gpio.3/i2c-3/3-0030/brightness_uA
      To disable flashlight:
      Code:
      echo 0 > /sys/devices/platform/i2c-gpio.3/i2c-3/3-0030/brightness_uA
    • Ril
    • NFC removed by default
    • WiFi
    • Tethering wifi
    • Camera (photos, camcorder & panorama)
    • Audio playback
    • Audio recording
    • Google Apps
    • More things I do not know

    attachment.php


    attachment.php


    Note : LINEAGE-14.1 is only for jellybean (v20) baseband. If you are on ics (v10) baseband flash v20 baseband
    • TWRP 3.0.3.0 Recovery
    • Wipe all partitions except sdcard!
    • Flash the lineage-14.1-*-UNOFFICIAL-e610.zip
    • After flash Gapps(Long boot time)(DONT MAKE THIS)
    • Reboot
    • If you used GAPPS, after SetupWizard, go to: "Settings" > "Apps" > "Google Play Services" > "Permissions" > And select all options, this fix FC of ... hmm, Google Play Services? The Google may know this problem but it is like "**** you and your Custom ROM"


    Screenshots:

    h9wppYX.png
    RVMY2mv.png
    kDQK7DP.png
    CTiGEtM.png
    yEPpZ1F.png
    l6vMvsp.png
    rojrBvj.png
    ZUPnBjt.png
    HDIK9lt.png
    Sq1ATmN.png
    rSIKQJC.png
    MytJYaC.png
    IwKCxtO.png
    XOTz3Lq.png



    XDA:DevDB Information
    Lineage 14.1, ROM for the LG Optimus L5

    Contributors
    Jonas Cardoso, Caio99BR, SlimShady's, InsideMuz
    Source Code: http://github.com/teamhacklg

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.4.x
    ROM Firmware Required: V20 Baseband

    Version Information
    Status: Alpha

    Created 2017-02-13
    Last Updated 2017-02-15
    3
    attachment.php

    Frequently asked questions

    Q: Will this conflict with any mod I'm using?
    A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!

    Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
    A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)

    Q: Which version should I flash
    A: Flash kernel with model number (E612), don't use (E610) or you may have problems with deep sleep

    Q: Which frequency is the safest
    A: The default frequency, 800MHz, is the safest!
    But, there's no harm in overclocking upto 1100MHz.
    You MAY face some issues on 1100MHz-1100MHz, but 1050MHz is stable as 'rock'!

    Q: WiFi doesnt work for me
    A: Reflash ROM and Kernel

    Q: How to logcat?
    A: Here

    A problem in ROM not reported?
    Make a logcat post here
    3

    i dont have pc for build rom
    3
    I need PC with 16GB RAM and good CPU like i5

    i will help you with this project already have l7 build but trying to fix ril then upload hit me up on telegram
    2
    ywYaI6v.png

    ALPHA1 - 08/02/17
    • Initial Release