GUIDES & FAQs [Android]: ADB Workshop by Adrynalyne and Guide by Captainkrtek
DO NOT POST IN THIS THREAD BEFORE READING THE WHOLE POST
PLEASE ADD GUIDES TO COMMON ISSUES YOURSELVES
To my recollection, the previous WM Guides thread was successful.. so we'll be moving on to android as well - from beginner to pro.
I hope this thread will provide answers to a decent percentage of your questions.
Please hold until guide collecting is finished..
In the meanwhile you are ALL invited to send me links or full guides to add to this thread.. remember, we are all about sharing.
COMING SOON! (in the meanwhile, you've got a great battery life guide at http://forum.xda-developers.com/showthread.php?t=471521 - be sure to thank BruceElliot for it!)
also, if you decide to post a guide, please keep the guide as neat as possible, with a title containing the LEVEL ([BEGINNER], [INTERMEDIATE], [PRO]) and the commonly searched words so that people who look for it can find it easily. (if you can, use the same color (dark orange) and same size (4) and Bold.. for the main title.. tho that's not a must :))
post #2. [BEGINNERS+INTERMEDIATE] Replacing System Files using Android Commander
post #3. [EVERYONE] ADB Workshop by Adrynalyne and Guide by Captainkrtek
post #4. [QUICK FAQ's] Common QnA's for beginners by Timmymarsh (work in progress)
[BEGINNERS] Replacing system files using Android Commander
Replacing system files using Android Commander:
(This post was formally based in the HD2's RTL support thread and revolved around our need to replace frameworks)
1. Download the android SDK from: http://dl.google.com/android/android...08-windows.zip
2. EXTRACT(!!!) the android-sdk-windows to c:\
(make sure you extract the dir - not run the setup from inside the zip file)
3. install Android Commander from http://androidcommander.com
4. Connect your device and make sure it's set to Debugging mode in /settings/applications/development/
5. You might have to set a dir containing your adb.exe file. set it to c:\android-sdk-windows\tools\
6. You will see a Total Commander-like interface. you can then copy the framework.jar file to the correct directory (there's no difference between SD android builds and androids in ROM - the system dir will be shown the same way)
a. Yes, you can replace/delete system files while android is running.
b. (for androids running from SD) Any file copied to /sdcard/android/root/system/X will be copied to /system/X in the system file. The sdcard/android root dir is JUST LIKE your root in ROM androids.
c. Make sure you either created a backup or verified a match in any other way before replacing files like frameworks, zimage, modules, etc.. your android might not boot afterwards (I keep all system.ext2 files backed up so that i can restore them incase i screw something up.)
[EVERYONE] ADB Workshop by Adrynalyne and Guide by Captainkrtek
This following guide was rewritten by Captainkrtek, please make sure to thank him for it
This workshop was held in #android-learning on irc.freenode.net by XDA Member Adrynalyne. All credit to him for this guide, I simply am taking it and turning it into a guide. Here we go! :)
You can find the raw IRC log here
Good evening folks, and welcome to my ADB workshop. This is by no means a full explanation on the subject, but more of a crash course to help folks get up to speed, and get more from their devices. There may be some things you already know here, so please be patient and respect those who do not.
So, lets just start with the basics.
What is ADB?
ADB stands for the android debugging bridge and is used for testing and debugging purposes by developers.
However, we like to get more out of our devices, and its a great way to fix things.
Knowing adb can mean the difference between a paperweight and a working phone.
So, to start with, we will look at installing ADB.
Generally speaking, the Sun/Oracle JDK is required to run all SDK functions.
ADB is but one tool in the SDK arsenal.
So, we begin by downloading and installing the JDK. This can be found here:
Choose your OS, download and install. I recommend that 64 bit users use the regular x86/32 bit version as well.
Moving ahead, we download the Windows sdk from here:
Due to already installing JDK, you won't be stopped by the install process.
Now, if you notice, I installed it to:
I did this because it makes things easier when setting up path variables.
I encourage everyone to do the same, but obviously it is not required.
So, this SDK is handy, but is only good up to 2.2. We want the latest and greatest! (Well I do)
So, we navigate to:
and we run SDK Manager.exe
If you notice in your PDF file for installing adb, you will notice that you can update, and I made a choice not to include earlier sdk versions.
I won't go into full detail on that, but depending on the version of SDK you have, 8 or 9, it WILL make a difference in using adb.
By default, for version 8 adb.exe resides in C:\android-sdk-windows\tools
By default, for version 9 adb.exe resides in C:\android-sdk-windows\platform-tools
We will assume version 9 in this guide
Really, the SDK is installed and adb is usable right now, but in my humble opinion, its not enough
I like the ability to use adb in ANY directory on my machine.
To do this, we edit Windows's environment variables.
Specifically, the system path.
To do this, we click on start, or the orb (depending on OS), and right click on Computer, left clicking on properties in the menu.
If its windows XP, I believe it brings you into advanced system properties immediatly. Vista and 7 need a second step.
On the left hand side, as you notice I have highlighted in the pdf, left click advanced system settings.
Under advanced tab, we left click environment variables...
There are two boxes here.
We are concerned with system variables, however.
So we scroll down the list and highlight path and click edit.
Ignoring all the extra stuff in here, make sure you are at the end of the line, and type
from the previous path statement.
Click ok all the way out.
We now have ADB setup globally. We can use cmd.exe (I use powershell) and no matter what directory we are in, adb is recognized.
If it is not, make certain you entered the path into system variables, and made no typos.
If you installed to a different location, you will need to adjust the path accordingly.
This concludes the section on installing the Android SDK to use ADB.
This next section will be on using ADB, so please open that pdf now.
Now, this applies to any OS, not just Windows.
Well, with the exception of the USB drivers.
I will not go too much into that, but if you take a look at the PDF, it goes through installing usb drivers for the sdk, and how to download them.
Fiarly straightforward, in that rspect.
Now, to setup our phones to use with the SDK and ADB, we must change some settings.
First, we go to menu softkey, then settings.
We scroll down to Applications and tap it.
Under Development, we will check Enable USB Debugging. Please note the SGS phones are different in this respect.
The USB cable must be unplugged before enabling or disabling this setting.
Once this is done, we are now ready to play with adb
One quick note: If you get device not found/conencted, please reboot your phone. DJ05 has a quirk in it where ADBD randomly crashes on boot.
A reboot will fix this
ADBD= ADB Daemon
Ok, continuing on.
Lets look at installing applications. This is also known as sideloading.
Unlike installing from the SD card, it does not require unknown sources to be enabled.
The command for this is
This will install the application to /data/app.
It will also show sometimes useful errors if install fails.
That is not something you will see from the Android GUI.
Now, a lot of us have probably deleted files with apps like Root Explorer. While this isn't really a bad thing, it leaves behind databases and data for the application removed.
This is where the 0kb applicaiton entries come from.
If you take that application entry name, you can uninstall the extra data via adb.
First we go to the adb shell which logs into the phone.
To get admin rights, you want to type
If you are not rooted, this will not work either.
Ok, now that we are logged in, we will type
Now this seems like a pain in the a** and I agree.
There will be a time where Manage applications crashes when you try to uninstall it from the phone. In this case, a factory reset, or this method is the only effective way to fix the problem.
How many of us have removed system applications or renamed them? Did you know that you can simply disable them from the system?
This can be seen as safer than deleting or renaming things, but your mileage may vary.
On the other hand, you can also re-enable these applications.
Also, application names are absolutely case sensitive.
*nix based Operating Systems see the letter 'a' and 'A' as two different things.
when you log into adb shell, you are playing by android rules
Ok, a lot of us tweak and mod our phones and turning off the device to get to clockwork recovery, or battery pulls, or multiple button holds to get into Download mode are troublesome and annoying at best.
ADB can help us here.
Here, we do not need to be logged into the shell
If we want to merely reboot the phone:
Its also handy if Android has locked up, but yet still works in adb.
I for one hate taking my case off to battery pull.
So now we move on to pushing and pulling files.
Sometimes, I don't feel like mounting my sd card to copy a file over to my phone.
I can use this command to push a file straight to my sd card:
Ok moving on
Pushing files can be done to any directory, however, some are protected.
For instance, /system is going to give you a permission denied or a read only filesystem error.
To get around this, the easiest thing to do is push the file to your sdcard, then log into the shell:
and it requires the path of the file and destination path. The name of the file is optional
When you copy it, you can rename it to whatever you like.
For instance, if we wanted to backup a file
You non rooted users will not.
Then you must use a slightly more complicated command called dd
This is used like this:
of= output file
Not every user friendly, but probably one of the safer copy commands.
Ok, moving on to pulling files.
Lets say you want to get a file from your phone, to modify, backup, etc.
To do this, we simply use adb in this manner:
I would do this
Like above, you can specifcy where it goes.
pushing files to the sdcard, it seems prudent to talk about changing permissions.
sdcards are typically fat32, which destroys permisisons, and Android is heavily permission based.
So if you push an application to your sd card, then try to copy it to /system/app/ bad things are going to happen, or the app may not even show up.
So in that case, we use something called chmod.
This is used in this manner
you dont want to do this while its still on your sd card.
Just a couple more topics to cover.
Lets go over deleting files.
This becomes especially handy for removing rogue applications.
To do this, we must be in the adb shell.
So what I did above was delete ADW Launcher from system/app
However, what if I wanted to delete the entire contents of a directory?
Same thing as before, except
very quick, very effective.
If you just tried that, please reboot your phone now
Ok....this leaves us with the final topic: logcat
logcat allows us to log what the OS is doing, and possibly delve information for when things are not working
its quite simple Reading it is another.
To use logcat
This should have captured enough data to see the error. Now, I prepared an example. A user came to me on IRC, and Google Maps was force closing. Clearing data didnt fix it, Clearing dalvik-cache, and fix permissions did not fix it. In this case, the user did not know how to use adb So I had him grab an app called alogcat from the market and email me the log. This is also a very valid method.
this file explains what the problem was, and highlights what to look for as an example.
This concludes the guide from Adrynalyne, there will be more workshops such as this one in irc.freenode.net #android-learning.
Thanks to everyone in #samsung-fascinate !
sources: Q&A Section, The Weekly Q&A Section by XDA News Writers (thanks guys)
Android control other device with IOIO Board.
It use ADB.
There is a note
1. linNUX is not *NIX.
2. Mac OS-X is a *NIX OS, it is based upon UNIX, they use their own variant called Darwin. Darwin does not require capitolization.
3. The word should be POSIX. Linux is POSIX compliant and POSIX defines the capitolization standardards
hope it helps
check this thread ;)
thanks. searched for that ;)
|All times are GMT +1. The time now is 11:51 AM.|