FORUMS
Remove All Ads from XDA

[8.1][sGSI]MIUI10 for Project Treble

334 posts
Thanks Meter: 468
 
By fxsheep, Senior Member on 9th September 2018, 04:35 AM
Post Reply Email Thread
Update 180914:
Always believe something wonderful is just going to happen.

WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.

This is still in early stage and should be normal if some features are broken.

Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.

8.1 vendor (vndk27) should be needed.

Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux

Credits:
@erfanoabdi

Install for A-only:

1.enable Treble ,flash a fully-trebled 8.1 rom

2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/

3.Restore MIUI10 /system with TWRP

4.flash two patch zip

5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.

6.Reboot.



Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with

adb logcat > logcat.txt via PC.



NOTE:

IF YOU STUCK AT MI ACCOUNT LOGIN, make sure you flashed permissiver
If the device says your device has mi account locked, then pull simcard out and reboot to complete the setup.

If you're stuck at logo , please make sure you can boot sGSI

Telegram Group:
https://t.me/funtouchosp

For Chinese users you can contact me via Coolapk.See my signature.

v1:
Initial release

Download
GDrive https://drive.google.com/open?id=1hy..._A5aSAbRHurZvU
The Following 68 Users Say Thank You to fxsheep For This Useful Post: [ View ] Gift fxsheep Ad-Free
 
 
9th September 2018, 05:08 AM |#2  
Senior Member
Thanks Meter: 39
 
More
This for Aonly or A/B?
9th September 2018, 05:27 AM |#3  
Member
Thanks Meter: 8
 
More
how about huawei device?
9th September 2018, 05:33 AM |#4  
fxsheep's Avatar
OP Senior Member
Thanks Meter: 468
 
More
Quote:
Originally Posted by 山海蓝精灵

how about huawei device?

Idk, maybe need 8.1 vendor huawei device
9th September 2018, 06:09 AM |#5  
Junior Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by fxsheep

WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.

This is still in early stage and should be normal if some features are broken.

Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.

8.1 vendor (vndk27) should be needed.

Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux

Credits:
@erfanoabdi

Install for A-only:

1.enable Treble ,flash a fully-trebled 8.1 rom

2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/

3.Restore MIUI10 /system with TWRP

4.flash two patch zip

5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.

6.Reboot.


Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with

adb logcat > logcat.txt via PC.


NOTE: If you're stuck at logo , please make sure you can boot sGSI

Telegram Group:
https://t.me/funtouchosp

v1:
Initial release
arm builds WIP

Download
GDrive https://drive.google.com/open?id=1hy..._A5aSAbRHurZvU


is volte working?
9th September 2018, 06:38 AM |#6  
Senior Member
Flag Chennai
Thanks Meter: 50
 
More
Quote:
Originally Posted by fxsheep

WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.

This is still in early stage and should be normal if some features are broken.

Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.

8.1 vendor (vndk27) should be needed.

Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux

Credits:
@erfanoabdi

Install for A-only:

1.enable Treble ,flash a fully-trebled 8.1 rom

2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/

3.Restore MIUI10 /system with TWRP

4.flash two patch zip

5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.

6.Reboot.


Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with

adb logcat > logcat.txt via PC.


NOTE: If you're stuck at logo , please make sure you can boot sGSI

Telegram Group:
https://t.me/funtouchosp

v1:
Initial release
arm builds WIP

Download
GDrive https://drive.google.com/open?id=1hy..._A5aSAbRHurZvU


AB support please!!!
9th September 2018, 07:51 AM |#7  
fxsheep's Avatar
OP Senior Member
Thanks Meter: 468
 
More
Quote:
Originally Posted by wmfanboy25

AB support please!!!

I don't have A/B devices ,so I don't get familiar with how A/B devices work,also this MIUI port is from an Aonly device, converting Aonly to A/B image is more difficult than vice versa
9th September 2018, 08:22 AM |#8  
Junior Member
Thanks Meter: 0
 
More
Global or Chinese?
9th September 2018, 08:36 AM |#9  
Junior Member
Thanks Meter: 0
 
More
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
9th September 2018, 08:51 AM |#10  
Swapnil Soni's Avatar
Recognized Developer
Flag Ahmedabad
Thanks Meter: 1,365
 
Donate to Me
More
Quote:
Originally Posted by [email protected]

Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).

take log or try clean flashing
The Following 2 Users Say Thank You to Swapnil Soni For This Useful Post: [ View ]
9th September 2018, 09:14 AM |#11  
Senior Member
Flag Malabon
Thanks Meter: 250
 
Donate to Me
More
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
The Following User Says Thank You to ebautista For This Useful Post: [ View ] Gift ebautista Ad-Free
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes